Jump to content

F-14B Campaign | Operation Reforger - The Iron Heel | Preliminary Release | Download Here


Recommended Posts

Posted

Dear all,

due to the sheer amount of content of voice lines that had to be added up until last minute, we unfortunately did not manage to include it in today's patch. Our apologies for that. But we did manage to complete it, and since we promised it, here it is. (Download attachement below.)



 

e9slvPa.jpg

 

We recommend to wait until after today's (dec 17) open beta patch to play it.

Please note that after inclusion into the module with the next patch, you will likely have to start the included version from start - in case you prefer to wait. However you can always finish the downloaded one first/ at the same time.

We sincerely hope you enjoy it!

 

 

 

 

EDIT: THE CAMPAIGN + HOTFIXES HAVE BEEN INCLUDED WITH THE LAST PATCH.

 

  • Like 12
  • Thanks 5

Heatblur Simulations

 

Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage.

 

http://www.heatblur.com/

 

https://www.facebook.com/heatblur/

Posted (edited)
4 minutes ago, nillefix said:

Patch release says Dec 17th....

 

Nick


I see, it just changed, thank you. Well, I will leave it up, in case it does not get pulled anymore. In any case I recommend to wait with it until after the patch. (It will be the same version of the campaign either way.)

Edited by IronMike

Heatblur Simulations

 

Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage.

 

http://www.heatblur.com/

 

https://www.facebook.com/heatblur/

Posted
2 minutes ago, IronMike said:


I see, it just changed, thank you. Well, I will leave it up, in case it does not get pulled anymore. In any case I recommend to wait with it until after the patch.

 

I'll wait. 👍

Posted (edited)

Fantastic!  Thank you Heatblur.  Where exactly do you install it?  Here: D:\DCS World OpenBeta\Mods\aircraft\F14\Missions\Campaigns, or here:  D:\DCS World OpenBeta\Mods\campaigns?

 

EDIT:  Okay, I see.  It's the former.

Edited by JupiterJoe

Intel Core i7-8700K CPU @ 3.70GHz - 64GB RAM - Nvidia GeForce RTX 3070 - Microsoft Sidewinder Force-feedback 2 - Virpil Mongoose CM-3 Throttle

Posted

Thanks a lot, HeatBlur! Eagerly awaiting tomorrow's patch: I can't wait to fly it! 🥳

Spoiler

Ryzen 9 5900X | 64GB G.Skill TridentZ 3600 | Asus ProArt RTX 4080 Super | ASUS ROG Strix X570-E GAMING | Samsung 990Pro 2TB + 960Pro 1TB NMVe | VR: Varjo Aero
Pro Flight Trainer Puma | VIRPIL MT-50CM2 grip on VPForce Rhino with Z-curve extension | Virpil CM3 throttle | Virpil CP2 + 3 | FSSB R3L | VPC Rotor TCS Plus base with SharKa-50 grip | Everything mounted on Monstertech MFC-1 | TPR rudder pedals

OpenXR | PD 1.0 | 100% render resolution | DCS graphics settings

 

Posted (edited)

So happy that you like it!

5 hours ago, JupiterJoe said:

Fantastic!  Thank you Heatblur.  Where exactly do you install it?  Here: D:\DCS World OpenBeta\Mods\aircraft\F14\Missions\Campaigns, or here:  D:\DCS World OpenBeta\Mods\campaigns?

 

EDIT:  Okay, I see.  It's the former.

 


They both work, however I would recommend to put it actually in a third place: c\username\saved games\dcs openbeta\missions\campaign\en - like this it stays untouched even after an update, both former folders would get content swiped during an update, means, you would have to move it in and out again prior and after an update to keep it. In saved games it will remain untouched. 🙂

 

If you put it in saved games, you can then access it via the "my campaigns" tab in the campaign section.

Edited by IronMike
  • Thanks 1

Heatblur Simulations

 

Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage.

 

http://www.heatblur.com/

 

https://www.facebook.com/heatblur/

Posted

Any chance of an SC version?

Intel 11900K/NVIDIA RTX 3090/32GB DDR4 3666/Z590 Asus Maximus motherboard/2TB Samsung EVO Pro/55" LG C9 120Hz @ 4K/Windows 10/Jotunheim Schiit external headphone amp/Virpil HOTAS + MFG Crosswind pedals

Posted
Just now, GunSlingerAUS said:

Any chance of an SC version?

 

First I will tackle the coop version, then we'll see. If I add it, it will be still called Stennis though, because changing the almost 1k voice lines, unfortunately is not an option. Either way: we plan on bringing you more SC content over time. 🙂
 

Heatblur Simulations

 

Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage.

 

http://www.heatblur.com/

 

https://www.facebook.com/heatblur/

Posted
38 minutes ago, IronMike said:

 

First I will tackle the coop version, then we'll see. If I add it, it will be still called Stennis though, because changing the almost 1k voice lines, unfortunately is not an option. Either way: we plan on bringing you more SC content over time. 🙂
 

Since there'll be a SC Stennis, some time, you've got time and won't have to change a thing. 🙂

"These are NOT 1 to 1 replicas of the real aircraft, there are countless compromises made on each of them" - Senior ED Member

 

Modules - Damn near all of them (no Christian Eagle or Yak)

System - Ryzen 9 7900X, 64Gig DDR5 RAM, RTX-4090, 3 32" monitors @1440, default settings of High (plus some)

Posted (edited)
8分钟前,IronMike说:

 

No, not in this campaign. It's more story-driven and created around the Stennis - you will see.. 🙂

Got it,thanks for reply.

Edited by Alphabet_Ghost

I7-4790K | RTX2070 | Thrustmaster Hotas Warthog | 24G DDR3 | 東芝 TOSHIBA HG5d M.2 256GB SSD | Q200 EX

Posted
9 hours ago, IronMike said:

 

First I will tackle the coop version, then we'll see. If I add it, it will be still called Stennis though, because changing the almost 1k voice lines, unfortunately is not an option. Either way: we plan on bringing you more SC content over time. 🙂
 

 

Personally, I wouldn't mind at all, and at least we'll have a really nice looking live carrier. The vanilla Stennis looks really bland once you are using the SC module 🙂.

  • Like 1
Posted (edited)

We'll think about it. However: in general a campaign evolves around a story around a certain ship, later, it will be the forrestal maybe, so that won't have a super carrier version either, as it defeats the purpose of telling a story around an older carrier, etc... As said, we will offer SC content, but please don't expect that every campaign will have a SC version. When applicable, or the story allows it, but in the end I care much more about telling a good story, and the campaign needs to follow that. In this case the story was chosen around the Stennis, because the Forrestal wasn't ready yet and so that everyone can enjoy it. I can't say more to not spoil anything, but when you play the campaign, you'll see. In this case I think I might wait till the SC Stennis is available.

In the future we might also offer more campaigns that are supercarrier only, etc... In the end, what matters is telling good and unique stories that are fun. In hindsight of that, I can promise you, that you won't miss the supercarrier too much hopefully. In the PG campaign, which will be more procedural, it will have a better place, because I intend to let the player spend more time on the boat, etc.. Please also note that the Supercarrier is not our module and us spending extra time on it, is good will towards you guys - which, as you know us, is something we gladly give, but it needs to fit and we need to find time for it. Hope that makes sense. 🙂   

Edited by IronMike
  • Like 2
  • Thanks 2

Heatblur Simulations

 

Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage.

 

http://www.heatblur.com/

 

https://www.facebook.com/heatblur/

Posted
14 hours ago, IronMike said:

 

First I will tackle the coop version, then we'll see.

 

Do I understand correctly, that the version you have uploaded here, is not yet coop compatible?

Intel i7-12700K @ 8x5GHz+4x3.8GHz + 32 GB DDR5 RAM + Nvidia Geforce RTX 2080 (8 GB VRAM) + M.2 SSD + Windows 10 64Bit

DCS Panavia Tornado (IDS) really needs to be a thing!

Tornado3 small.jpg

Posted
Just now, QuiGon said:

 

Do I understand correctly, that the version you have uploaded here, is not yet coop compatible?


Correct. In the strict sense a campaign isn't really coop compatible anyways, since you have to load the missions 1 by 1 in MP. You can ofc do that already and fly it with a RIO. If you do not want to wait, feel free to simply change lead and wingman from player and AI to client, and fly it like that. That's the only change I will do for COOP. I'll include it before the next patch.

  • Thanks 1

Heatblur Simulations

 

Please feel free to contact me anytime, either via PM here, on the forums, or via email through the contact form on our homepage.

 

http://www.heatblur.com/

 

https://www.facebook.com/heatblur/

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...