All Activity

Like SilverDevil says. You will probably have better luck in the mods forum, and not in the bug section, because it is not a bug. And not even an official module. Cheers! Sent from my SM-A536B using Tapatalk

However, even with Virtual Desktop Streamer, when I launch dcs, the setting remains in 2D. What did I forget?

Thanks for pointing out wrong name, which can only add to suspicion on not enough research when Magnitude decided to use it. Yak-38, MiG-23, MiG-27, MiG-21PFMs and Sukhoi family aircrafts operated kh-23/kh-66 (Zvezda). But not MiG-21Bis, as radar RP-22 is based on fixed beam instead of continues wave (CW). Maybe Yugoslavia upgraded Bis on their own. But I didn't see Grom listed in Yugoslav air force manual for L-17 (Mig-21bis).

To my understanding, that in order for it to be on stream, it has to have a release date. Also Wags has two videos on the Mig already.

Not....theoretically, all variants with RP-21M radar can use Kh-66 missile. So, MiG-21PFM, modernized PF, M, MF. Another thing: Kh-66 never had name Grom, even Kh-23 didn't had that name. Yugoslav variant of Kh-23 produced under Soviet licence had name Grom.....

These look ok. We need to see the bindings of @drspankle.

understood. you may get better results in the mod forum. i just happened to see it and thought i would put in my 2 cents.

Qcumber said You can get a third-party cable with a charging port. Yes, I was talking about this cable, but I didn't realize that you had to plug the charger into the box (dumb guy). Now it's done and it works, thanks. I just bought Virtual Desktop Streamer, and it was a bit of a struggle, and I'm waiting in line for them to install it directly on my PC.

This does not work, just tried it again and definitely not working. Did the restart as it asks after removing module and it just went from a 240gb update to over 340gb because I removed the module. The support team was also no help and they permanently de-licensed a few maps I never use anymore - it still wants to reload them. So I threw in the towel and I just removed DCS and now doing a fresh install to see if this will work. So this is interesting, I have not been counting but been using DCS for way over 10 years, probably closer to 15 and as long as I can remember my login to the forums was a username and now it does not work and will only take an email, and it does not recognize any of my emails probably because it was from a long time ago and I don't remember what email I used that long ago. So I had to make a fresh account to post this question. They say bad things happen in threes so now I'm waiting for my graphics card to take a dump.

That’s actually a problem of the none stereoscopic camera. With two eyes you can look further into the edges than the camera can with its single viewpoint. In VR it’s much better. I guess next to different implementations, it is just a matter of how much excess real estate a given HUD offers. In the A10 it is very little….

I suspect that the AI isn't tightly controlled during replays, and has some leeway it shouldn't have. This causes errors compares to the original flight, errors that will propagate with time, leading to vastly different outcomes.

> This is compounded by a couple factors, including "Strike" giving directions to targets in very uncertain terms ("Bogies to the West", "Bandits flying from Abu Musa") rather than proper BRAA calls. There's a pretty egregious example of this in Mission 14 when the enemy helos take off from Abu Musa about 8 miles from the helos you're trying to protect. The radio call tells you they're at Angels 1.6, so obviously Strike knows exactly where those helos are, but he doesn't give you any kind of range indication at all. A simple "from Abu Musa" or "at 8 miles" would have made it way easier to find these things, I had no idea where to look for them since I know from previous missions that sometimes stuff just spawns in the air hot on you. The entire call is "bandits west angels 1.6 hot." I'm doing my best here given the situation but the lack of SA here still results in a mission fail Tacview-20250906-100250-DCS.zip.acmi - i'm hanging out at angels 20 because based on previous missions i'm expecting a flight of 4 fixed-wings to come try to kill me at any moment - as soon as I get the radio call, I pointed my nose at 270, went to 6 bar scan, and angled my radar down - unbeknownst to me, these things are so close that they're still out of my radar scan - so i crash dive down to angels 4 thinking a nose-on scan will have to see them - but by the time i do that, they're already to my 9 o' clock and i've missed them. i keep flying around and scanning but because i'm scared of AAA on abu musa that limits my movement. never found them by the time they killed my guys Feels very silly to be losing missions to stuff like this.

Hello folks, Currently, I have a i5 10600K, RTX 3070 with 32 GB RAM, which gives me a solid 60FPS on my pancake setup. I was quite content with it until I have made the switch and I purchased a Quest 3 a few months back and I can see that my rig is not sufficient for VR; I can get about 40 FPS at VR graphic preset with 1.1 PD. So, I intend to get a new rig, and I am aiming for a safe 72 FPS to match my headset refresh rate, with DCS graphic settings at High and a PD of 1.5. I am not after getting a top-of-the-line rig; I just need something good enough to meet my 72FPS@High@PD1.5 goal. I've been an Intel/Nvidia fan always, and I wish to stick with the Intel/Nvidia pair. Cost is not a top concern. What do you you guys recommend?

Yeah I don't have a feel for the HARM range yet so I was trying to push it either until the threat ring or until the SA-6 locked me up, didn't realize it was locking my wing (he's a computer and doesn't communicate)

Make sure the default view is in the correct position so that you see the full HUD without anything being outside of the view box. Once the default view is correct, you shouldn't have any issue. Also make a habit to reset your Opentrack view from time to time as it may drift ever so slightly.

I support but it's a wrong subforum for that wish.

In fairness, he never stopped updating this map (and since it's "his" map, he's been the one updating it all along). Razbam was only the publisher and even after they publicly announced they were stopping pushing updates to the F-15 etc, there were still SA map updates pushed.

Can you show exactly where did you placed the mod's files? ... mine are here (my DCS folder at saved games is actually called "DCS.296"):

Thanks @omnijinx will take a look. Looking at mission plan, message comes at 19.7 miles to SAM, the red line kill range is 13.4 miles. The idea is if you both do a 180 as soon as you get the warning you will have both cleared the 13.4 mile kill range. That's how I have always flown the mission. Notice you kept flying to the SAM until your wing was hit. Hope this helps.

Надо будет по возможности проверить Х-25, в таком случае. И кстати спасибо за уточнение по поводу систем наведения. А есть где поточнее почитать про конкретно системы наведения Камовского и Апача? Я нашёл пару статей на киберленинке про лазерные системы наведения ВТО, но вдруг есть что ещё

Are you talking about the Heads Up Display (HUD) or the Multi-function Display (MFD?) At any rate it sounds like you need to adjust your Snapview Settings. Here are links to a couple of videos on how to do it:

I don’t fly the F-16 but that HUD behavior might be realistic. The A-10 HUD image extends beyond the edges of the glass and you need to move your head to see it all.

Maybe GameStop could stock some DCS discs

That was my first starting point. a hint might be that I could get almost non of the suggestions to work. The 8k shadows did work but broke integrity check I did successfully create the autoexe file to keep hud and mfd away from dlss (but that got wiped out when I removed the dcs folder for trouble shooting... I see no difference) I did add the dcs exe to pimax play no problem I did setup pimax play no problem 1) Dcs doesnt show up in DLSS swapper main page I tried to add it but not sure if its even working 2)Nvidia profile inspector doesnt have DCS.exe. I use Digital combat simulator black shark from the list which in my case has no "DLSS overrides" as shown in the video and no options with SR listed that I can find 3)Mbuccas quadviews did work but would crash just as often if not more. 4) I did not try the open xr layers in the API tool kit 5) In nvidia control panel 3d settings using sharping would not initially work but a reinstall to the latest driver did solve this Some notable lines from the crash file as follows 2025-09-03 03:16:47.037 INFO VISUALIZER (Main): [20:16:47.822][Info ] OpenXR: System Eye Gaze Interaction Properties: Name=Pimax Crystal Super VendorId=13476 is not supported! 2025-09-03 03:40:28.448 INFO VISUALIZER (Main): [20:40:29.232][Info ] OpenXR: XrEventDataSessionStateChanged: state XR_SESSION_STATE_FOCUSED->XR_SESSION_STATE_VISIBLE session=1 time=253321681100 2025-09-03 03:18:42.315 ERROR EDCORE (37296): Can't open file: /textures/!cracksmask.lua. 2025-09-03 03:18:42.315 ERROR EDTERRAINGRAPHICS41 (37296): Failed to open array "!cracksmask.lua" 2025-09-03 03:18:42.325 ERROR EDCORE (37296): Can't open file: /textures/!cracksmask.lua. 2025-09-03 03:18:42.325 ERROR EDTERRAINGRAPHICS41 (37296): Failed to open array "!cracksmask.lua" 2025-09-03 03:19:20.523 ERROR EDCORE (37296): Can't open file: /textures/!cracksmask.lua. 2025-09-03 03:35:00.280 ERROR NGMODEL (27652): Can't load lod ptb-800-mig21-collision.edm of model ptb-800-mig21. Reason: More distant lod must not have more arguments than closer! 0 < 1 in ptb-800-mig21-collision.edm ptb-800-mig21

Have you checked your dcs.log file for any errors? The DCS Discord channel has a feature that allows you to upload and analyze the dcs.log file for any errors and will give recommendations for fixing or optimizing your setup.