All Activity

What about " canards " my english is véry old, explain what mean "canards "

Just edited my post at the same time than you did. I'm already using these tree bindings but they don't seem to work as they should. Almost no effect, at least not enough to compensate the strong right drift. May be '(unstable)' has some meaning ...

How does it works? I tried to install it in the main DCS folder, firstly with OVGME, it didn't work and then I copied CoreMods and Mods folders in the main DCS folder and it didn't work, In my settings, I don't have any new category of inputs and in game, when I press space, it doesn't fire But, I can chooses ammo type in the ME, so it is recognized by DCS but I can't fire

Just checked, and the Mod seems to have the binding you need: but I haven't tested it personally.

a stupid question maybe I find that if i want to limit my groove time in 15-18s I have to line up in 0.5 or 0.6 nm (tacan distance on hud). If I line up in0.7-0.8 groove time will be too long. But we should line up in3/4 nm right? So how can I line up in3/4nm and limit groove time in 15-17….. just do a math Lets Assume the plane is traveling in 140 ias no wind and ground speed is 140too. The plane will fly 2.3 nm per minute. That means in15s it will travel 0.58nm. In18s it will travel 0.69nm. But 3/4nm is 0.75 right? In practice, mother is moving and wind is blowing so Hornets will never approach in 140relative ground speed. And it sometimes doesn’t fly as fast as 140 maybe 135. So if we line up in 0.75 as standard, we are likely end up in 20s groove time….. Can anyone share some experience or tell me what’s my mistake?

Right now we don't know what the resolution will be, but it's looking bleak. We're definitely unlikely to get one before there's a definite answer. Afterwards, if RAZBAM goes away, I assume the aircraft will be up for grabs. Perhaps the Red Star people would be interested in it, they seem to be doing a really good job with the MiG-17. I'm more worried about the Harrier. The F-15E is such a popular aircraft that someone will, sooner or later, step up, probably with an actual AI WSO. Any Harrier variant would be tricky to get right, relatively hard to get docs for (Brits are notoriously cagey about declassifying stuff), and a rather niche aircraft. Not sure about Mirage 2000, but as long as it keeps working and being sold, it could be fine, being the most complete and polished of the RAZBAM modules.

I do too, but that's one issue amongst many and the patching is not quick with several layers of priority as mentioned in the forum. Don't take my comments as dismissive. I always look for user side work around especially for something customizable as bindings, as the patches and fixes take long to come. Happy flying.

I would like the option to delete the replays that do not work any more or not wanted with in DCS replay folder in game.

Nice I'll definitely have a look at this thanks for putting this together! I'm kinda scripting illiterate, would this be possible to do for other warbirds like the p-47?

Thanks. Also, "after you interact with kneeboard with the mouse" is rather important to mention. Have updated OP accordingly. Thanks again. I could very easily work around the issue, but I think it must've been introduced relatively recently (I've been away from DCS for six months) as I've never encountered it before. And I do believe it is an issue, and that it needs resolving.

We are not interested in going third-party. Everyone working on the Bronco/Alphajet has other jobs, and we simply don’t have the time.

Hi, Thank you for your message. And thank you very much for the Tacview file. It helps a lot. I don't think you are doing anything wrong. After achieving air superiority level high enough you need to protect blue ground troops from enemy attack aircraft and helos and destroy enough enemy ground troops. And I think that's just what you tried to do. From Tacview we can see that Devils 3 and 5 are tasked to CAS area Lima instead of India. Lima is at north. Sometimes it is possible that F10 menu gets overwhelmed and something else is activated even if you push just right row. Shouldn't happen very often but it's good to check the text after selecting task for AI units to be certain that right task is given to them. Please try that again and if still a wrong CAS area is given report me the name of the mission and how many dynamic missions you have played so I can check if there is something wrong. Time to get all units airborne is now longer than it was when the campaign was made. After the DCS deck crew update things have changed so that those AI units will only taxi after you. Unfortunately there is no way I could tell them to taxi first as the AI deck behavior is determined by DCS.

Yes, exactly. Plus the North when it releases.

Never say never.

The issue can happen after you interact with kneeboard with the mouse. 'Enter' and 'Space' keys make the page jump to the "bookmarked" sections as OP mentioned. It seems hardcoded as there is no bindings to change it. Best of luck, I hope the issue is resolved for you.

Many thanks!

I tried this feature and was able to get static/dynamicly created ammo palette,the UH-1 cargo style load and the M117 bombs into the cargo bay. The bay has three slots. I was not able to place the barrels as an internal cargo. There was an image on ED discord development pics where the Mi-8 was loaded with barrels. How can I achieve this!?

mm I have a G2 gathering dust will give it a go me thinks, I am on my second QP at the moment but still worth a look.

Hi. This is a hidden one,trivial thing,nothing really hurt. also I think I find the potential cause of it. There are lots of failures you can set for ka50 using mission editor. But those 2 failures:ABRIS SOFTWARE/ABRIS HARDWARE,seems broken. If u set them in ME,then it won't trigger the failure in game. track.....(I set ABRIS software failure in ME,within 1 min,100% probability,but I guess in the track nothing really happened,the failure is not even displayed in the after mission report) mission editor ABRIS failure settings .trk I checked \DCS World\Mods\aircraft\Ka-50_3\Cockpit\Scripts\Devices_specs\ABRIS.lua and other lua files. Looks like every other failure has an "element" assigned to it,but only those 2 don't have them. I tried adding "elements" to them and things suddenly start working. after adding "elements",abris software failure triggers a blue screen,also hardware failure works too. It works okay in old dcs world version without "element",but I guess some updated new core system changed it,looks like now an "element" is always required? I don't know what exact those element are,(maybe linked to DM? I don't want get a blue screen every time when hit by7.62 bullets) ,so better let the team know and find a suitable fix.(when free of course) Thanks in advance. (sorry for reporting so many things,I guess I'm addicted to this heli recently...fly it a looooot. nice sim product) mission editor ABRIS failure settings .trk

thinking of getting the entire map, the east requires version 2.9.13. if i purchase the entire country will I also have the full detail map of the east included in the download? tks ....

No bindings in the general section of controls? I'll boot up my DCS to check. Yes, there is no 'right' way to bind anything. My controls schemes throughout the years were often among the extremes to be able to experience DCS with limited peripherals. I understand.

Thank you for letting me know that it appears we disagree on how we prefer to set up or HOTASes. Which is fine as there is no "right" way. Different strokes, live and let live, etc. Let me, however, try to explain the issue I am reporting in a different way, so you can perhaps appreciate that there is a tangible problem, even if it doesn't affect you. If the default keyboard binding for the F-18 TDC - Depress function is ENT, which IIRC it is, then the ENT key should NOT also cause the kneeboard pages to switch. This kneeboard functionality also appears to be hard coded, which is probably a bad idea in and of itselt.

Others say the res is similar but they love Q3's fov and large sweet spot.

Hey, I spotted some minor problems in M5 today: Some voice lines were off: - We get the picture for the mission at the holding, where he tells us that Hate 1-3 is out, and at the same time Hate 1-3 first reports that he is out - Jester calls good hits on the target on the way back, well after dropping the bombs Some AI issues: - My flight never rolls in to drop the bombs. I´m supposed to be in a 10sec trail, but they just turn to the next WP, without attacking the target - On the way back, we nearly collide with the F5s as we cross their way on the initial to the runway

Hey! This was reported in the Discord. I've made changes for the next update, which will definitely improve both the Pantsir and Tor M2 engagement performance.