txmtb

Yep, according to this: http://www.eteknix.com/nvidia-reportedly-stopped-maxwell-gm204-and-gm200-production/

There's 3 different radios in the aircraft, AM, FM, & UHF. You have to select the one you want to talk out of. The radio you are on will appear above the command window when you go to transmit a message. You can hear all 3 of them when receiving. Radio select functions are on the Mic Switch. Forward for AM, down for UHF, and back for FM IIRC.

I use one of these on my PS3 Eye and it works very well. I did not remove the camera filter either. I used 950nm led's in my build IIRC so this filter will pass them. You need to know what wavelength your led's are. http://www.amazon.com/ZOMEi-25MM-GLASS-Infrared-Filter/dp/B00MHRVHLU/ref=sr_1_13?ie=UTF8&qid=1460033479&sr=8-13&keywords=ir+pass+filter You can use imagination to mount it. I went the water bottle method and mounted the filter to it with double sided tape. It's removable from the camera by just sliding the cap off. http://forums.eagle.ru/showpost.php?p=2092142

Thanks! Didn't know they had released an update.

You need to perform a little registry hack and it should fix you up. Check out post 31 in this thread for a link and the VID/PID ID's. Had to do this for mine and they've been fine now. http://forums.eagle.ru/showthread.php?t=115816&page=4

+1 would be nice. As it is now. You can create a custom user curve on the throttle axis to make it match but I can't remember at what % the AB kicks in and haven't redone my curves since going to 1.5 but it's on the to-do list. It's definitely a trial and error approach. Edit: Sniped :doh:

Believe you can still change it in x:\Users\xxxxx\Saved Games\DCS\Config\autoexec.cfg. Then it won't get changed back after an update/repair. You have to create the autoexec.cfg file in that directory. Mine is set to: options.graphics.ScreenshotQuality = 100

I would imagine you could get a part 3D printed that would allow it. I've thought about it before just to get the AB detent to not requiring the lift to get over the hump and just be able push through it.

Yea, that's another thing with using the Steam version. I got away from Steam for DCS a long time ago. About everything else I play is on Steam. But it's nice to use the standalone and be able to get modules from both sales.

Nope it doesn't work the other way around from DCS to Steam.

You can just copy the directory over and update your shortcuts to the new directory path.

You can also just assign it in the Axis Commands, that's how mine is set up. Mine has no jitter on it and it works perfectly.

You might want to try some JB Weld, not sure if it will hold though. Be careful with it though, it's some strong stuff.

Pretty sure you can go into the old account serial number manager and transfer the serial number's to your new account. Edit: Had a chance to go look, login and go to your profile page. Put in the serial # you want to transfer and there's a field there for you to put the username you want to bind it to. Which would be your new one of course.

It's been fixed in 1.5 so hopefully you are running it. There's a .reg fix in this thread. http://forums.eagle.ru/showthread.php?t=136153

Thanks c0ff! I didn't know the ISP's rules and it's basically a mom and pop ISP as I dwell in the country, there's no cable/phone providers that offer an alternative to them. 3 miles down the road they have cable so go figure. I agree that it's a bunch of BS that they do this, but basically to fight them would probably mean losing my internet until resolved.

Hopefully ED can reverse the order of how the updates work now and put http first. My ISP automatically disconnects the internet whenever torrent traffic is detected. So when I went to update I lost my internet connection and had to call my ISP to get it turned back on. They gave me a warning and I even pointed out to them that this is a legitimate use of torrent but they have a zero tolerance policy. And no, I don't have a choice in ISP's as they are the only provider available.

Check the latest release notes: http://forums.eagle.ru/showpost.php?p=2564015&postcount=9

Not sure what your GPU is but if you want to get them aligned, you need to set up bezel correction. What it will do is make it so the monitor bezels will actually hide what is behind them. Here's the Nvidia article on it. http://nvidia.custhelp.com/app/answers/detail/a_id/2685/~/what-is-bezel-correction%3F

For the training missions I'm not sure tbh. I never paid that much attention to them.

There was a known issue in 1.2.16 and before where the individual AC hours were not tracked, believe it has been fixed in 1.5 Beta. Edit: See that you are complaining about total hours and training, not individual AC hours. Not sure about that one.

Maybe I've missed a post or some fix somewhere but finally got time to spend this weekend on DCS and have spent hours trying to figure this out. When flying I see the tree shadows at a distance looking like black blotches on the ground, when flying toward them they slowly fill in. I've tried about every setting combination in the options I think with no change. Also increased far distance in Ultra.lua to 30000.0. Using latest Nvidia drivers for my 970's. and am sitting around 2700 mb memory usage on the cards. Attachments show what I'm seeing and last used settings are there. I have to be missing something simple here? :huh:

I'm sure it varies by manufacturer but I know that most posts on the EVGA forum say to not even install GeForce Experience and some are upset at Nvidia's decision. I tried it for a while but outside of shadowplay, there was no benefit that I could find. It did manage to muck up my EuroTruck 2 settings when it when to "optimize" so I've never installed it since. Yes, it's easy enough to keep it from starting and easy enough to shut it off, but like Yurgon said, shouldn't have to if you don't want it in the first place.

Got a crash after ~20 minutes of flying from Batumi to Senaki, landed at Senaki, took off again and crashed within a minute or two heading back to Batumi. .log, .crash, .dmp, .trk, .nfo attached in zip. DCS_Crash.zip

Finally got 1.5 up and running this evening and am noticing the same thing. Weird blotches on the ground and then the trees pop into view and spread out.