Snacko

There's an option in user settings on the forums to turn it on and off. I have mine turned off, so I don't know if it would work or not. Sent from my Moto Z Play using Tapatalk

My OB started crashing after the last OB patch and two Hot Fixes. I have removed all of my mods, run a Repair, and even disabled all of my Shaders in Reshade. But it always crashes DCS after I close the Reshade window. I have also updated Reshade to the latest version. The Windows Event Viewer points to the ..bin\dxgi.dll, so it's definity Reshade that is crashing. And the dcs.log doesn't seem to show anything, it just creates a dump file. Has anyone else had this problem?

I have SimShaker sending output to two small amps(front/back) each with left/right channels. With 2 large shakers on my Volair Simpit(left/right) and two small ones ($10) on my stick and throttle and 2 more under my pedals. All sent through a separate cheap audio card to VoiceMeeter Banana to filter out high frequencies.

What's your MB? If you have an Asus look for an OC guide like this...

Same. It's beautiful, but too clean. Right off the assembly line.. Sent from my Moto Z Play using Tapatalk

SUPERCARRIER! Merry Christmas! [emoji1335] [emoji320] [emoji106]

Maybe this will help?

Has it been mentioned anywhere if there is a Release Date or and ETA for the Supercarrier?

Yes, I think you two have misunderstood my request. But BluFin got it I think. Maybe Capt Z will know a way to get the SOI status from the game? Sent from my Moto Z Play using Tapatalk

@BlueFinBima or anybody? I don't see SOI available as an DCS A10C Interface? Is it possible to make this available? If I could get the SOI for the A10C, then I could easily make a Helios profile to display all of the currently available commands for all the HOTAS Hats based on which sensor is SOI. This would help me and others learn and make it easier to jump back into the Hog after some time away. Thanks, Snacko

Are you saying that you can't assign a keyboard key to those commands? I think also since they are not aircraft specific, if you map the same button that is used in an aircraft, the aircraft command overrides the VR and UI commands.. Sent from my Moto Z Play using Tapatalk

I also did a test with all of that many months ago with the same results. I don't think it's finished or working yet.

I wish there was an easy way to remove all of the airport kneeboards not needed in a mission /flight. There's too many to scroll through. Sent from my Moto Z Play using Tapatalk

I started using VAICOM Pro again a few weeks ago and had trouble with the updates. That time I had to update VAICOM, Chatter, and AIRIO manually. Now again, with this new update I have to do it again. The updates goes through it's steps and says to restart, but it doesn't work. Could the problem be that I have VoiceAttack keep it's files in the My Documents folder here: F:\My Documents\VoiceAttack Files\Apps\VAICOMPRO Is VAICOM smart enough to ask VAICOM where it keeps it's plugins? Or does it just assume they are in a default location?

When I use Create Fast Mission from the main menu and select a different map than Caucaus, and then click Advanced mode, it always defaults to the Caucaus map, which I did not select. I always have to click cancel, and select my map again, and click Advanced Mode again. Then it loads the correct map.

In the Helios install folder look for a file called something like heliosSettings.xml. Open in notepad and see if it looks ok. If it gets corrupted delete it and try again. Sent from my Moto Z Play using Tapatalk

You can also edit the profile in notepad and change the monitor x, y.. Width, height manually. Sent from my Moto Z Play using Tapatalk

Ahh... that was it. I hadn't updated it for a while. Cheers!:thumbup:

That is beautiful!! EDIT: I am getting an error loading the profile in the Editor and Control Center. The Helios Log says this: 11/10/2019 2:08:46 PM - All - Helios Version 1.4.2018.1008 11/10/2019 2:08:58 PM - Error - Error loading profile F:\My Documents\Helios\Profiles\FA-18C_b_beta.hpf Exception Source:System.Xml Exception Message:Element 'Children' was not found. Line 297, position 20. Stack Trace: at System.Xml.XmlReader.ReadStartElement(String name) at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControls(HeliosVisualCollection controls, XmlReader xmlReader) at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControl(XmlReader xmlReader) at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControls(HeliosVisualCollection controls, XmlReader xmlReader) at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControl(XmlReader xmlReader) at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControls(HeliosVisualCollection controls, XmlReader xmlReader) at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControl(XmlReader xmlReader) at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeControls(HeliosVisualCollection controls, XmlReader xmlReader) at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeMonitor(XmlReader xmlReader) at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeMonitors(MonitorCollection destination, XmlReader xmlReader) at GadrocsWorkshop.Helios.HeliosSerializer.DeserializeProfile(HeliosProfile profile, XmlReader xmlReader) at GadrocsWorkshop.Helios.ProfileManager.LoadProfile(String path, Dispatcher dispatcher) I looked at line 297 char 20 and it looks fine. So, I don't know what may be wrong. I am using Blue Fin's new version of Helios. Your older profile works fine. EDIT 2: I also tried to run it in Gadroc's old version of Helios with the same results. I edited the profile using Notepad++ and deleted many controls to try and narrow down the problem. I removed all controls except one control that had <MouseWheel>True</MouseWheel>. I noticed that if I removed that line of code, that it would load. So, I removed all of those from the original profile and then I no longer got the error in the log because the Editor crashed on loading. The Event Viewer log is below. It may be something to do with the Mouse Wheel code. I don't know if any of this helps you... But I was curious to try and get it working.. :thumbup: Application: Profile Editor.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception. Exception Info: System.NullReferenceException at GadrocsWorkshop.Helios.BaseDeserializer.DispCreateNewObject(System.String, System.String) Exception Info: System.Reflection.TargetInvocationException at System.RuntimeMethodHandle.InvokeMethod(System.Object, System.Object[], System.Signature, Boolean) at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(System.Object, System.Object[], System.Object[]) at System.Delegate.DynamicInvokeImpl(System.Object[]) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean) at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object) at MS.Internal.CulturePreservingExecutionContext.Run(MS.Internal.CulturePreservingExecutionContext, System.Threading.ContextCallback, System.Object) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) at MS.Win32.HwndWrapper.WndProc(IntPtr, Int32, IntPtr, IntPtr, Boolean ByRef) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(System.Object) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(System.Delegate, System.Object, Int32) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(System.Object, System.Delegate, System.Object, Int32, System.Delegate) at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(System.Windows.Threading.DispatcherPriority, System.TimeSpan, System.Delegate, System.Object, Int32) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr, Int32, IntPtr, IntPtr) at MS.Win32.UnsafeNativeMethods.DispatchMessage(System.Windows.Interop.MSG ByRef) at System.Windows.Threading.Dispatcher.PushFrameImpl(System.Windows.Threading.DispatcherFrame) at System.Windows.Application.RunDispatcher(System.Object) at System.Windows.Application.RunInternal(System.Windows.Window) at GadrocsWorkshop.Helios.ProfileEditor.App.Main()

I'm thinking about this too.. but, I have he Oculus Rift and several games in the Oculus Store. Will I loose those games? And what about my Steam VR games? And what about Reverb games?? Do they also have their own store? If so will I loose those games if I upgrade to something else later?

Used Vaicom for the first time in a while today.. I noticed a bunch of messages in the VoiceAttack log window from the game.. Like "A10c Pull Up" over and over again.. and others. What is that and how do I turn it off? I'm not looking at VoiceAttack for information like that. Thanks.

So how many buttons does a rotary encoder have? Just 2? Up/down? On/off? Sent from my Moto Z Play using Tapatalk

What is the difference between a potentiometer and a rotary encoder? As far as how it is normally used?

If it doesn't work don't use it. I have found KBB a very useful tool. But it's also finicky, and I have less headaches if I just use the basic features that work. Sent from my Moto Z Play using Tapatalk