RightStuff

Hi Joe, I's use rotary encoders oder potis as well for the VHF/UHF panel. Either the cheap one you already found by yourself or the real good stuff from Grayhill.

Hi Jacks, I just ordered a LOT of 5 chips AX1201728SG via Aliexpress: Just 2 USD. Each one can drive up to 4 X27. Caveat: They are SMD, so ordering breakout boards as well can be useful. Hope it helps...

Can (should) be toggled with NWS when in AG Mastermode: CCIP - CCRP - DTOS If not possible: Bug / WIP. Chose one. ;)

I think this bug report is now obsolete as meanwhile the "F16-style HARM" was promised for the F18.

Hm... Why are you not using a 2pole switch? Example for ON-ON 2pol.: Left side: controlling LEDs Right side: Arduino -> DCS As you won't get any output from the sim which you can control with the Arduino, you can only switch the LEDs on/off directly. ON-OFF-ON could be used as well, if you want to have a neutral middle position. Or are you aiming for another solution?

Bump. Any official comment on this, pls?

With a little LUA-edit you'll even have the covers staying in sync. At least it is possible for the F18. Maybe the F14 can be 'tricked' the same way? https://forums.eagle.ru/showpost.php?p=4168935&postcount=655

Hi Fred, welcome aboard. Yes.. Unfortunately Pokeys is almost no factor in DCS. Really a pity... The easiest way to get your current cockpit hardware up and running with DCS is currently not available: Enhancing F4toPokeys so that it is able to use the exported data of DCS instead of the shared mem. https://github.com/johndcollins/F4ToPokeysV2 Maybe with a little 'proxy program' F4toPokeys can be tricked: This program shall read the data from DCS exports and write them in the same format into the Shared Memory as F4P expects them there. These header files are commonly known. That way both worlds would benefit from this great piece of software. Otherwise: DCSBios would be the way to go... - but this lacks an interface to Pokeys as it is "Arduino-native".

Just renaming them won't be enough. You need to make them uniq on the hardware side. This great article might help: https://flyandwire.com/2018/10/04/arduino-pills-multiple-control-boxes-id/

Jup.. Buchen wir den? Last word @Hind ...

"Red Air" in den USA hat mittlerweile eigene MiG29 und auch sonst gibt es genügend Mgk. für "Blue vs Red". Malaysia mit der Su27 zB. War schon ne interessante Zeit mit der MiG29 in der Lw. Definitiv!

Wie schon gesagt wurde: Durch Drücken des Trim-Buttons am Boden(!) - in der Luft macht der nur noch "Stick Centering. Beim Trim Reset werden als Default 12 Grad eingestellt. Der Wert muss dann dem Abfluggewicht angepasst werden. Lt. NATOPS: <44.000 lbs auf 16 45.000 - 48.000 auf 17 >49.000 auf 19 Nitpicking: Für das Gewicht zw. 44.001 und 48.999, sowie 48.001 und 48.000 schweigt sich das NATOPS aus. ;)

Wow.. Thanks for the list. That's a bunch. Hat off to your craftmansship. I'm curious to see what you'll show us next:thumbup:

Great build!:thumbup: That looks like a big bunch of hardware.. May you please name a list what was used? Just the relevant electronics like the 2560 and the Nanos - not the nuts and bolts. ;) TIA!

Thank you for the quick update of the settings: All perfect! :)

For me: Both links are showing an 404 error.

Keine Chance: Kann frühestens 18:30 vor Ort sein.

Vorschlag: Machen wir "drüben" / PN

Hast Du die DXe evtl. hier dem Throttle statt dem Joystick zugewiesen? Zieh die Spalte da mal auf, damit der ganze Name des Device sichtbar wird.

Missing: Eurofighter by True Grit (3rd Party) https://forums.eagle.ru/forumdisplay.php?f=729

@9Line: Thx for pushing this to 'CHECKING'!

Hi Joe, glad to see you back on stage! :) Good luck with your project: Keep us informed.:thumbup:

Du hast den Carrier auch installiert? Schau mal in Deine installierten Mods. Der muss da noch extra angehakt werden. Von alleine geht der nicht aktiv. War zumindest bei mir so. ;)

Forget it - forever:( https://forums.eagle.ru/showpost.php?p=4255774&postcount=12 Hopefully ATFLIR will get this and other features.