Search the Community
Showing results for tags 'dcs world'.
Found 11 results
-
Hey, I am longer thinking about, what are the best settings for DCS? Maybe you can post your Reshade and ingamesettings below, i would be very interested what your settings are. Best regards!
-
I am not sure when DCS stopped having flames come out of the engine exhaust ports, but I have seen videos on Youtube that show when they all did. Top Mustang shows flames and its 11 years old. Bottom video shows flames at 4:52 I found newer ones for the spitfire.- 6 replies
-
- 2
-
-
- spitfire
- eagle dynamics
- (and 3 more)
-
Welcome to OVO by DCS Indonesia Operation Voltar Odyssey is a PVE Dynamic Campaign for DCS World organised by DCS Indonesia - Garuda virtual Air Wing. It features a persistent campaign on a Caucasus map. OVO is a dynamic campaign based on mission. Every player can choose their mission that is available for each slot. It’s environment is created to provide a realistic (within the limitations of the DCS engine) simulation of the depicted scenario. In OVO that most important, It was created to introduce realistic operations in flight patterns, communication, and goal achievement together. We hope you enjoy flying on Operation Voltar Odyssey, good luck and happy landing! DCS Indonesia - Garuda virtual Air Wing Campaign Lead : Eagle Eye Campaign Advisor : Jupiter, Cendrawasih, Dalva, Pocong Lord, Pseudocatz, Hakha032 CINEMATIC TRAILER Background Story The territory of the Republic of Velcon is increasingly suppressed and now not only the PLAF but Russia and Ukraine are increasingly cornering its current position. This position seems to be under pressure. But some air defenses are still working well. GvAW and the UN Coalition asked to kick back the people's liberation army that continues to pressure the Republic of Velcon. The current conditions of their movements are monitored in several places. Find them by choosing missions according to the available slots. How do we prevent the People Liberation Army from helping the Velcon Republic? Be a part of OVO! More information about this campaign can be found here: https://bit.ly/OVO2GVAW Server Information Server IP : server.gvaw.web.id:10330 SRS IP : server.gvaw.web.id:10331 __________________ DCS World Indonesia Garuda virtual Air Wing Instagram : @dcsindonesia_official Youtube : DCS World Indonesia - GVAW Website : gvaw.web.id Discord : https://discord.gg/g5updJrd2Z __________________ Note: Our server location is in Asia it might be get a ping around 100-200 around Europe & USA. -
fixed internally Mossy no longer has thrust control option
ctguy1955 posted a topic in Bugs and Problems
I downloaded and installed the new 2.78.16140 update, and now it has tons of new items to choose, but no where can I find a setting to use my TM Warthog Throttle in the Axis area. *********************************************************************************************************************** I just found: input. generic throttle slider and it worked. I should most likely delete this whole thread, but others may now also now know that throttle is now not near Pitch Roll and Rudder. -
Check my video at: Here’s an honest review of the Cubesim EASY PANEL EP3U composed by 1 UFC, 3 Mfds (usb monitors) with smaller dimensions against the real F/A-18 MFDs and one Hub (cubesim hub) that has four usb 3.0 port for the UFC and MFDs, four power receptable to give power to the units . You can find them on www.cubesim.com.cn or check their Facebook page at https://www.facebook.com/CubeSimGarfield The Items arrived quickly with FEDEX and they were packaged really carefully. I was so excited that i just took a picture of the open box. I choose to buy just the MFDs without the bezel as I’m owning the Trustmaster set so decided to go with them. The mounting of the MFDs (usb displays 800 x 600) to my ALU rig has been quite simple, I preferred to install them directly into the Alu profile of my cockpit instead of mounting them on the provided Alu profile. Assemby of every MFDs took no longer than 10 minutes, removing the protective sheet, placing the TM Mfd on the display, four screws, the backplate, four nuts and just screw everything. The UFC instead was provided with a swivel mount that attaches to the back of the UFC and then is attached to the provided Alu Profile. The alu profile then is secured to my cockpit with the provided clamp. On the Software side the guys at Cube Sim asked me to provide them my monitor setup and then they sent me the lua file for exporting the views correctly on the usb monitors. Initial configuration was set keeping the USB monitors on the left of my main monitors but i realized that each time i was switching off the computer at next reboot i was finding the monitors on the left side. Again Cubesim sent another Lua file that solved everything. The MFDs response rate is with no delay. Probably they’re just a little bit dark but this seems to be a DCS issue the brightness in the SIM actually is still not yet acheived on the export feature. About the UFC, instead, i faced some troubles with the first program they sent me, there was no way to have the UFC working, everything seemed OK, the com port was exchanging datas but UFC was not waking up. It was solved in a couple of days with, what they said, an update of the interfacing program. One click on the new executable, one click on the “connect” button and finally also the UFC was working properly. What i was unable to use and still unable to use are the three usb ports installed on the back of the UFC. They are supposed to be the port for the TM Mfds but even if the unit is powered by the cubesim hub they continue to disconnect (probably they’re dreaning too much power) so I decided to solve with an extra usb hub. Construction: Simply awesome ! Buttons and switches give a positive sound, you can hear the “click” on the pushbuttons and the click on the switches, display are awesome and the time of response with the sim is perfect ! I I didn’t realize any delay, nor in the display of the UFC nor while changing pages on the MFDs Cons: Display dimension. Of course these MFDs are moulded on the F-16 dimension viewing area is 4X4”on the display are a little bit wider (5.90” / 15cm) they protrude orizzontally of 0.2” / 0.5cm each side but while flying is unnoteceable. At the end, I’m very happy with the gift I made to myself for my birthday and I’m sure I’ll enjoy this set up in the forecoming months. -
two different videos, enjoy.
-
Discord To achieve the aim of team-work, it is mandatory to join the dedicated ACES discord server through https://discord.gg/jnDs3aNkEN and request for LFE Blue Force/LFE Red Force role in #role-request.
-
Hi all. I have a Dell G7 gaming laptop and, of DCS World. I have a display issue. The window doesn’t display fully. For example, when I do the start up training for any of the modules I cannot turn on the battery because I can’t see it. It’s outside the window. That sucks since I’m unable to train. The correct resolution, 1920x1080, is set both on the Dell and the module. Any and all help will be appreciated. Thanks, Gunslinger II
-
Flight Sim Cockpit for sale. I’m giving up on the flight sim thing since I have too many hobbies. All of these items are less than 90 days old and FULLY functional. Flight Chair w/ Mounted Throttle/Flight Stick/Mouse. Seat comes with BUTTKICKER Haptic System (ButtKicker Gamer2 w/ clamp on and AMP and all cords) WINWING MFDs (x3) with Displays and Desk Clamp Mount. VKB Gladiator NXT EVO Flight Stick and VKB STECS Throttle System (Standard) Local Pickup Preferred but shipping available for a fee…..All of this for $1200.00. VKB Flight SIM, WINWING, BUTTKicker, DCS World, MSFS,Cockpit, Gaming, Thrustmaster
-
Has the ability to restart a download from where You last stopped, now gone from 2.9 DCSW ? I am on my 3rd attempt and only after 2 days did it just give Me a ETA of 20+ hours to go. Tomorrow the town I live in is having a planned outage and My DCS D/L will not be finished yet. I have a 2nd SSD that has the updated version to 2.9, with all 9 maps (362.9GB) but I have to leave off 4 maps to have space to do the update to 2.9 I was not able to just copy and paste and have it update any faster. Thanks for any info or help Mike
-
CA 1.2.8 test (no RC2)
.jpeg.e0ab1ff9b6f56504405b1458bf224102.jpeg)
.jpeg.ee63a54201e44eb2ad149adb4f818e88.jpeg)
.jpeg.4cd8423268de9dcebcbd29e7ea34ec38.jpeg)
