Professional and affordable TrackIR alternative

[tombeckett2285]

I think it's still too early for the VR headsets to mature and not everyone can afford those pricey headsets so there's plenty of scope for these head tracking devices... At least till the time the prices of the VR headsets reduce significantly which I reckon will not happen anytime soon... Also not to forget the hardware upgrade costs for supporting these VR headsets...

BTW hegykc, how long before we see these trackers on sale?

 

Nash

 

 

I absolutely agree; I only get an hour or two each week on my PC and simply can't justify dropping over £400 on a view headset; I wouldn't pay it for a monitor. Hegykc's tracker seems made for me; hopefully it performs as well as its competitors seem to.

 

 

Sent from my iPhone using Tapatalk

[golfsierra2]

Noted. Ready to buy when you are ready to deliver.

[Vitaliq]

Nice, but unfortunately a couple of years too late. Flight simmers will be spending, or saving their monies to spend on VR headsets with built in tracking, with ten times the immersion of TrackIR.

 

On the contrary, wtih the 700$ announced for a non mature project it's the perfect moment to have a 35$ alternative.

 

VR will be mature in a few years and the price will fall. The replika's trackIr is a good investissement now

[Sokol1_br]

Nice, but unfortunately a couple of years too late. Flight simmers will be spending, or saving their monies to spend on VR headsets with built in tracking, with ten times the immersion of TrackIR.

 

In a "perfect world" maybe...

 

I know dozen of "simmers" that will happy if can buy a TrackIR - the thing cost ~150$ only for Americans.

[SinusoidDelta]

You changed the focal length when you removed the IR filter. You can take it back apart and sand the plastic base down until it focuses perfectly.

 

And lens kits are available for the Ps3eye camera, it's nothing new.

[wormeaten]

Let us know if that improvement shows in performance

 

Yes in way of more reliable and precise head tracking.

 

Movement when it works in both cases is the same but with better focus I didn't get in situation to lose tracking or dots overlapping and canceling.

 

So it is important feature.

[SinusoidDelta]

Lock the camera in one of the two focus positions. Hold something in front of the camera about 2 feet away and slowly move it closer while watching the camera's output on your computer.

 

You'll likely see that in one of the two focus settings the camera is in only focus when 25mm away. The focal point probably moved because the IR filter acts as a hard stop for the lens assembly. Now the bright unfiltered IR light is an out of focus blob.

 

Try that and tell us the result.

Edited January 25, 2016 by SinusoidDelta

[Starfish]

Here is my review of the Delanclip, if you're interested:

[ame]

[/ame] Edited January 28, 2016 by Starfish

[Vincent90]

Thank you for posting it, I'm still on the fence between waiting for the Replika IR to enter production or a more expensive, but faster delivered, competitor and your video really helped in showing what the delanclip is all about and what it offers.

 

Too bad it doesnt have a magnet on it, I dont really see myself taping/zip tying it to my stainless steel headphone =/ Will keep F5'ing this thread for the next couple of weeks then...

 

EDIT: By the way, you can make the PS3 camera less wobbly by making a band of a piece of tape and sticking it between your speaker and camera

Edited January 27, 2016 by Vincent90

[Starfish]

By the way, you can make the PS3 camera less wobbly by making a band of a piece of tape and sticking it between your speaker and camera

 

Yeah I'm still trying to figure out how to mount it somewhere stable, there is just not a single flat surface anywhere near my screen :/ Furthermore, you can rotate the cam but you can't change the vertical angle of it.

[GeorgeLKMT]

Buy a mounting clip. ;)

 

 

[Starfish]

Buy a mounting clip. ;)

 

 

This is mindblowing! Thanks for the advice, I did not even think about the existence of such a device :doh:

[zaelu]

Or you can use Poxilina http://www.poxilina.com/ or another similar product to create a solid 100% custom base for it.

 

Because it is a sort of glue I suggest using some paper tape to cover the monitor until the product solidifies, then lift it up carefully (use a knife to detach it carefully), clean the paper, paint it and... voila

[Bourrinopathe]

You can also make a silicone paste made of plumbing clear silicone, acrylic paint, and corn starch. You will end up with something like the Sugru mouldable glue. It's easy to remove without harming your monitor and it's cheap. (there are many recipes)

[Bucic]

Or you can use Poxilina http://www.poxilina.com/ or another similar product to create a solid 100% custom base for it.

 

Because it is a sort of glue I suggest using some paper tape to cover the monitor until the product solidifies, then lift it up carefully (use a knife to detach it carefully), clean the paper, paint it and... voila

I'm from central Europe so not much into aesthetics but damn, this looks like a bundle of boogers :megalol:

[GeorgeLKMT]

...or you can really spend those 4 bucks on that plastic holder ;):D

[mr_mojo97]

I presume that poxilina is the same as polymorph on ebay. Its very good and easy to use, and good for making loads of stuff. I made my car phone holder from it a while ago. did the job well

[zaelu]

...or you can really spend those 4 bucks on that plastic holder ;):D

 

I bet a plastic holder cant hold a candle against my poxiline support. :pilotfly: If needed I bring 2 cats :D

 

I'm from central Europe so not much into aesthetics but damn, this looks like a bundle of boogers

 

 

It's a combination of elements, old phone camera, old marker+nail lacquer, finger prints, dust. :P In fact the poxiline is the white stuff you can see underneath, very homogeneous material, the black stuff is just silly paint.

[Nash]

Hey hegykc,

 

Any chance of releasing your final Tracking device as a Valentines gift for the DCS community to Buy? :smartass:

:beer::beer::beer:

[sniperwolfpk5]

This is my DIY clip. You just need a paper. fold that paper and put it on your monitor and then put that clip to prevent scratching your monitor

 

 

[zaelu]

Now that is how you say Aesthetics to go to heck! :D

[sniperwolfpk5]

I didn't mod my PS3 eye rather i used kids broken glasses glass :)

[probad]

How are the tests going?

 

EDIT: nvm I realized he said couple weeks not couple days

[Headwarp]

This makes me wish I hadn't just ordered a Delan clip to replace my broken track clip pros... and the $20 pos I ordered from hong kong.

 

I'd buy this just for the clip.

[Vitaliq]

I have waited a few weeks about the replika product but we had no news so I decided to build my own trackIR for less than 25€.

 

Sold 3 leds et 3D print online a support and it's works perfectly.