Weegie Posted December 17, 2020 Posted December 17, 2020 1 hour ago, RogueSqdn said: Turning off auto browse does not fix the intermittent ATC page. Sent from my iPhone using Tapatalk Pro Different problem that's why I quoted eagleace specifically. I gather you've tried putting in a command into the Vaicom VA profile for the ATC tab and that didn't work, if not surely it's worth a shot? I've got all the Interactive tabs working via the "Execute an External Plugin Fuction" using the commands detailed in the manual. I use VSPX and as of now not all the calls work via Vaicom on its own, without the additional commands being added into the Vaicom profile . Other than that I'm outta ideas @hornblower793 or Hollywood himself are the best bets to help you. I'd also go direct to the Vaicom website and raise the query, although Hollywood visits here from time to time, I've always found shooting a query on the Vaicom website gets a faster response than posting up here. 1
RogueSqdn Posted December 17, 2020 Posted December 17, 2020 Yes, I do have a command created, but unfortunately it only works about half the time. I can’t seem to narrow down why. Not at home now so I can’t give you more information than that. I CAN tell you that I have left/right cycle tabs and a command for the REF tab working. The left/right cycle skips past the ATC tab most of the time also. Sent from my iPhone using Tapatalk Pro DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders)
Judy1301 Posted December 18, 2020 Posted December 18, 2020 (edited) 22 hours ago, RogueSqdn said: Yes, I do have a command created, but unfortunately it only works about half the time. I can’t seem to narrow down why. Not at home now so I can’t give you more information than that. I CAN tell you that I have left/right cycle tabs and a command for the REF tab working. The left/right cycle skips past the ATC tab most of the time also. Sent from my iPhone using Tapatalk Pro Exactly the same happening here. Vocally or with keyboard shortcuts set in the Vaicom profile, the ATC tab doesn't really work. And I've also tried unselecting the Auto Browse option in the Config app. It doesn't make any difference. Funny because all other kneeboard tabs work perfectly. And I've also set "next page" and "previous page" commands in the profile, through the External Plugin Function but it never shows the ATC tab. Judy Edited December 18, 2020 by Judy1301 Typo's
Biga42 Posted December 18, 2020 Posted December 18, 2020 In Carrier the ATC does not write the spoken instructions in the kneeboard? 1
Hoirtel Posted December 22, 2020 Posted December 22, 2020 I can't get all the tabs to work in the kneeboard. Notes and Logs work. Seems keywords are in the profile and VA says recognised "awaiting additional input"?
overalien Posted December 23, 2020 Posted December 23, 2020 In Carrier the ATC does not write the spoken instructions in the kneeboard?Can confirm. Same problem here. Sent from my iPhone using Tapatalk __________________ overalien Hog Driver starting to really like the Tomcat System specs: Intel i7-8700k - OC to 5.0 GHz | 32 GB RAM 3600 MHz | Nvidia 1080ti SLi | Mixed Storage - Win 10 and DCS on Samsung SSD 970 Pro Flightgear: 7 Displays (3 x 1440p, 1 X 1080p, 3 X Lilliput Touch) | 3 x Cougar MFDs | Warthog HOTAS | Thrustmaster TPR Pedals | iBEAM Shaker + Simshaker for Aviators w. Sound Module | Helios | VAICOM Pro + AIRIO | TrackIR 5
Hoirtel Posted December 23, 2020 Posted December 23, 2020 1 hour ago, overalien said: Can confirm. Same problem here. Sent from my iPhone using Tapatalk Yeah me too. Along with tab issues as others have said. Shame as I thought this was an amazing addition to DCS, almost essential really as its plugs a real gap and would make mission planning and execution so much more easily. Takes so long to collect all co-ords, and radio frequencies and get them into a kneeboard. I really think ED need to incorporate this sort of thing into core DCS. Even without the voice command bit.
Hollywood_315 Posted December 23, 2020 Author Posted December 23, 2020 (edited) Update with FINISH and use the corect syntax e.g. ' JTAC,... Page'. See manual. Carrier CASE I works, CASE III doesn't: known issue. Edited December 23, 2020 by Hollywood_315 There is no spoon. VAICOM PRO plugin for DCS World www.vaicompro.com
RogueSqdn Posted December 23, 2020 Posted December 23, 2020 In my case, it’s the manual tab commands that won’t work to bring up the ATC page. Haven’t tried it by voice. Sent from my iPhone using Tapatalk Pro DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders)
Hoirtel Posted December 23, 2020 Posted December 23, 2020 44 minutes ago, RogueSqdn said: In my case, it’s the manual tab commands that won’t work to bring up the ATC page. Haven’t tried it by voice. Sent from my iPhone using Tapatalk Pro Manual tab commands??
Hoirtel Posted December 23, 2020 Posted December 23, 2020 1 hour ago, Hollywood_315 said: Update with FINISH and use the corect syntax e.g. ' JTAC,... Page'. See manual. Carrier CASE I works, CASE III doesn't: known issue. I'll re-read the manual. I may have not done everything correctly. Thanks. If the profile in VA has the words listed then they will be saved correctly?, is that right?
RogueSqdn Posted December 23, 2020 Posted December 23, 2020 Manual tab commands?? You can manually program commands into Voiceattack to switch to individual tabs, or to cycle left/right between them. It’s covered in the VAICOM manual. Sent from my iPhone using Tapatalk Pro 1 DEFENSOR FORTIS Spoiler Systems: Falcon NW Talon: Ryzen 9 5950X @4.9GHz, 64GB DDR4, RTX 3090 FE; Falcon NW Mach V: Core i7 3930K @3.2GHz, 32GB DDR3, GTX 1080 FE Cockpit: MonsterTech MTX F, 42" 4K TV, HP Reverb G2, Oculus Rift S, PointCTRL Controls: RS F16SGRH CE, RS F18CGRH, VPC T-50CM2, VFX, WarBRD (Grips); VPC T-50CM2, RS FSSB R3L (Bases); Winwing F/A-18C, VPC T-50CM3, VPC T-50CM, TM Warthog, Cougar (Throttles); VPC ACE2 (Rudders)
Biga42 Posted December 23, 2020 Posted December 23, 2020 @Hollywood_315Is possible in the next update to add in the ATC page the TACAN frequencies? 1
Hoirtel Posted December 24, 2020 Posted December 24, 2020 21 hours ago, RogueSqdn said: You can manually program commands into Voiceattack to switch to individual tabs, or to cycle left/right between them. It’s covered in the VAICOM manual. Sent from my iPhone using Tapatalk Pro That works for me, I can bind it to my button box. Great! Prefer that to voice command. Thanks!
dburne Posted December 24, 2020 Posted December 24, 2020 Just purchased the Kneeboard extension. It said to activate in the Vaicom config menu, but I do not see anything in there related to activating the Kneeboard extension? Is this done automatically? Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero|
Weegie Posted December 24, 2020 Posted December 24, 2020 Just stick the Key No into the (enter license key here) box followed by your email address in the (enter email address here) box in the About Tab of the Vaicom pop up and after it registers with the server, which might take a few tries and it should be good to go. Remember when putting in the Serial No & mail address to delete the (enter license key here) & (enter email address here) bfore putting in the details
dburne Posted December 24, 2020 Posted December 24, 2020 43 minutes ago, Weegie said: Just stick the Key No into the (enter license key here) box followed by your email address in the (enter email address here) box in the About Tab of the Vaicom pop up and after it registers with the server, which might take a few tries and it should be good to go. Remember when putting in the Serial No & mail address to delete the (enter license key here) & (enter email address here) bfore putting in the details Thank you! Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero|
sirrah Posted January 3, 2021 Posted January 3, 2021 @Hollywood_315 and the entire VAICOM team (I assume there's a team?): Thank you for this great tool! As a Voice Attack and VAICOM Pro newcomer, the new interactive kneeboard is very helpful. Obviously stuff like being able to readback JTAC coordinates is extremely useful in VR. But also, for someone new like me, it really helps to see all the different possible radio callout lines (in the right side of the kneeboard). Also, as a non native English speaker, I'm amazed by how good my voice commamds are recognized (I only did the Windows voice recognition test once). VAICOM Pro and this kneeboard really enhanced my DCS experience!! System specs: i7-8700K @stock speed - GTX 1080TI @ stock speed - AsRock Extreme4 Z370 - 32GB DDR4 @3GHz- 500GB SSD - 2TB nvme - 650W PSU HP Reverb G1 v2 - Saitek Pro pedals - TM Warthog HOTAS - TM F/A-18 Grip - TM Cougar HOTAS (NN-Dan mod) & (throttle standalone mod) - VIRPIL VPC Rotor TCS Plus with ALPHA-L grip - Pointctrl & aux banks <-- must have for VR users!! - Andre's SimShaker Jetpad - Fully adjustable DIY playseat - VA+VAICOM - Realsimulator FSSB-R3 ~ That nuke might not have been the best of ideas, Sir... the enemy is furious ~ GUMMBAH
Hollywood_315 Posted January 3, 2021 Author Posted January 3, 2021 (edited) Excellent - thanks for sharing. Edited January 3, 2021 by Hollywood_315 There is no spoon. VAICOM PRO plugin for DCS World www.vaicompro.com
goldleader Posted January 4, 2021 Posted January 4, 2021 On 11/29/2020 at 9:25 PM, Biga42 said: I realized that when you switch to ATC page is showing radios frequencies as 3.125, 4.123...etc, is possible to show the frequencies as 127,500...etc? Is it a configuration issue? thanks! @Hollywood_315 Do you know if there is a solution to this? 1 AMD 9800X3D CPU @ 5.1GHz, Win11 Pro 64bit, Gigabyte X870E AORUS MASTER Mobo, G.Skill Trident Z5 Neo RGB 64GB 600Mhz Ram, 1 x Samsung 990EVO 2Tb .m2 (DCS), 1 x ADATA SX8200 Pro 1Tb Drive (OS), 1 x RTX 2080Ti AORUS Waterforce 11Gb, 3 x 27" ACER Predator 2560x1440px, 27" LG 2560x1440px, HP Reverb G2, TrackIR5, HOTAS Warthog Throttle and Stick, Thrustmaster TPR, 3 x HOTAS Cougar MFCDs, Elgato Streamdeck, Streamdeck XL & Streamdeck+
funkster Posted January 4, 2021 Posted January 4, 2021 (edited) Any news / release of the update to fix the known issue of Case II /III ATC notes not being made? Also is the player dictation function working? Mine doesnt do anything!? Edited January 4, 2021 by funkster
sthompson Posted January 5, 2021 Posted January 5, 2021 6 hours ago, funkster said: Any news / release of the update to fix the known issue of Case II /III ATC notes not being made? https://forums.eagle.ru/topic/257727-happy-new-year/ I'm Softball on Multiplayer. NZXT Player Three Prime, i9-13900K@3.00GHz, 64GB DDR5, Win 11 Home, Nvidia GeForce RTX 4090 24GB, TrackIR 5, VKB Gunfighter III with MCG Ultimate grip, VKB STECS Standard Throttle, CH Pro pedals
Hoirtel Posted January 7, 2021 Posted January 7, 2021 I have noticed that I can't get much of my misson briefing to appear on the first page, seems to just get the first word or two and then that's it. This would be really handy so I can finally add co-ordinates to brief in ME and then see them on kneeboard. I know this can be done view the ESC key but I can't directly copy co-ords from hat into aircraft as I have to keep stopping and starting.
das Rindvieh Posted January 7, 2021 Posted January 7, 2021 I´m having a problem with the dictation mode. Everything works as it should, exept the dictation mode. I can start it, the red "dict on" is turned on, but it doesn´t write anything down. No matter if I keep the PTT pressed or not. Any ideas? thx btw: Great addition to vaicom, thx for that Hollywood! Keep up the great work! Really appreciate it!
Recommended Posts