... Posted May 13, 2021 Share Posted May 13, 2021 I've noticed that the AIM-9X's heat sensor has a hard time enslaving itself to the heat source until it's too close to have no options to escape. I have also noticed that the ACM and LHAQ mode with the helmet mode activated there are times that they do not block the target in visual, it happens randomly and it is seconds that in DCS are the difference between winning and losing. I'm the only one? https://launionescuadron.webnode.es/ Link to comment Share on other sites More sharing options...
kengou Posted May 13, 2021 Share Posted May 13, 2021 I'd have to know more to know if you're experiencing a bug or not. But it's worth pointing out that these things are unreliable in real life, and the AIM-9X can't pick up heat signatures that far away - it's a close-range missile and the heat signature of the target varies depending on a lot of things. 1 Virpil WarBRD | Thrustmaster Hornet Grip | Foxx Mount | Thrustmaster TWCS Throttle | Logitech G Throttle Quadrant | VKB T-Rudder IV | TrackIR 5 AMD Ryzen 5 3600 | Nvidia GTX 1060 6GB | 32GB DDR4 3200 | SSD Link to comment Share on other sites More sharing options...
Foka Posted May 13, 2021 Share Posted May 13, 2021 Sidewinder is a close range missile, not a BVR, in dogfight it won't be realiable on ranges over 2 nm. Whole radar in Hornet is bugged, has troubles with locking target and with maintain lock on target, so this same goes with LHAQ mode. 1 Link to comment Share on other sites More sharing options...
... Posted May 13, 2021 Author Share Posted May 13, 2021 I know it is a short range missile, I do not intend to use it in any other way and I am obviously referring to situations where the target is clearly within range and the sensor is not enslaved to its heat source. As close as looking at it with your eyes and differentiating its silhouette. This happens randomly and is more common with JHMCS. https://launionescuadron.webnode.es/ Link to comment Share on other sites More sharing options...
ED Team BIGNEWY Posted May 13, 2021 ED Team Share Posted May 13, 2021 We are having no issues here, please include a track replay showing the problem. Please remove any unofficial mods if you have any also. thanks Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal Link to comment Share on other sites More sharing options...
... Posted May 13, 2021 Author Share Posted May 13, 2021 hace 1 hora, BIGNEWY dijo: We are having no issues here, please include a track replay showing the problem. Please remove any unofficial mods if you have any also. thanks Thanks, I'll be waiting if it happens again to reproduce it and attach a screenshot. https://launionescuadron.webnode.es/ Link to comment Share on other sites More sharing options...
... Posted May 13, 2021 Author Share Posted May 13, 2021 https://www.youtube.com/watch?v=rnnv_CdZUZY I don't have any kind of mod installed. https://launionescuadron.webnode.es/ Link to comment Share on other sites More sharing options...
ED Team BIGNEWY Posted May 13, 2021 ED Team Share Posted May 13, 2021 Hi, the video gives no indication if the targets are in gimbal of the radar. We really need to see short track replay showing a potential problem so we can reproduce with the same circumstance. When we test with the target within radar gimbal all is ok for us. thank you. 1 Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal Link to comment Share on other sites More sharing options...
Hulkbust44 Posted May 14, 2021 Share Posted May 14, 2021 Hi, the video gives no indication if the targets are in gimbal of the radar. We really need to see short track replay showing a potential problem so we can reproduce with the same circumstance. When we test with the target within radar gimbal all is ok for us. thank you.Actually the video does.The HACQ circle would be flashing if he was looking outside of gimbal limits. Furthermore, the JHMCS tells us his current heading, and the bearing of his current LOS. Aircraft heading: 210°, LOS bearing: 156° the difference is 54°, so still within gimbal limits by the numbers.Sent from my SM-G955U using Tapatalk 1 Link to comment Share on other sites More sharing options...
... Posted May 15, 2021 Author Share Posted May 15, 2021 Here it is more evident. We are attempting to block a contact with LHAQ within effective range, less than forty nautical miles. I have no mods installed and have recently performed a repair. https://www.youtube.com/watch?v=ZNwfLnjYmz8 I'll wait to see if there are more people with this problem, I don't want to put the team to work for something that only fails me. Thanks. https://launionescuadron.webnode.es/ Link to comment Share on other sites More sharing options...
... Posted May 17, 2021 Author Share Posted May 17, 2021 https://www.youtube.com/watch?v=f4lpFg461Gs Here you have, a situation where the AIM-9X sensor does not catch the heat source from the target within two nautical miles, close enough for its IRs to be directed towards us. https://launionescuadron.webnode.es/ Link to comment Share on other sites More sharing options...
Freedee Posted May 17, 2021 Share Posted May 17, 2021 2 hours ago, La Unión Atazar said: https://www.youtube.com/watch?v=f4lpFg461Gs Here you have, a situation where the AIM-9X sensor does not catch the heat source from the target within two nautical miles, close enough for its IRs to be directed towards us. Hi, please check you IR COOL switch, you have it OFF state, dont know if it's finaly implemented in DCS FA18. It serves for COOL-down your IR sensors in AIM9's. just an idea of what could be causing it, I don't know if it will solve the problem. Link to comment Share on other sites More sharing options...
Foka Posted May 17, 2021 Share Posted May 17, 2021 IR COOL is not implemented. 1 Link to comment Share on other sites More sharing options...
Bunny Clark Posted May 17, 2021 Share Posted May 17, 2021 I also don't think that IR COOL has any function for the AIM-9X anyway. 1 Oil In The Water Hornet Campaign. Bunny's: Form-Fillable Controller Layout PDFs | HOTAS Kneeboards | Checklist Kneeboards Link to comment Share on other sites More sharing options...
... Posted May 21, 2021 Author Share Posted May 21, 2021 https://m.youtube.com/watch?v=wkv9rm0d8GY https://launionescuadron.webnode.es/ Link to comment Share on other sites More sharing options...
mongo52 Posted May 21, 2021 Share Posted May 21, 2021 IRL IR COOL switch in the off position will supply cooling with WoffW, master to arm, and sidewinder selected. In the NORM position cooling is supplied with WoffW. And in ORIDE supplies cooling regardless of WonW or WoffW. Link to comment Share on other sites More sharing options...
... Posted May 24, 2021 Author Share Posted May 24, 2021 As you can see, we looked for a solid block before launching the missile, but the infrared sensor is not enslaved to our target's heat source. This problem ruins our experience. We start from a healthy and clean operating system, without modifications or antivirus, with recent updates https://m.youtube.com/watch?v=wkv9rm0d8GY https://launionescuadron.webnode.es/ Link to comment Share on other sites More sharing options...
Hazardpro Posted May 24, 2021 Share Posted May 24, 2021 (edited) You need to uncage the seeker if you want it to track an acquired target. Also even if implemented the IR COOL switch won't be applicable for AIM-9X because it has an internal cooling system that doesn't require aircraft support. Edited May 24, 2021 by Hazardpro Link to comment Share on other sites More sharing options...
skywalker22 Posted May 31, 2021 Share Posted May 31, 2021 (edited) On 5/21/2021 at 6:33 AM, La Unión Atazar said: https://m.youtube.com/watch?v=wkv9rm0d8GY Why you didnt turn on HACQ mode? And when on target just press Undesignate button. Works like a charm, always. Edited May 31, 2021 by skywalker22 Link to comment Share on other sites More sharing options...
Recommended Posts