mbucchia Posted August 25, 2022 Posted August 25, 2022 (edited) 48 minutes ago, Ginsu80 said: Same, updated everything, clean/repair using skatezilla, downloaded opencomposite, openxr, follwed the guide. No hands with the G2 The latest OpenComposite build broke a few things on the controllers side. Revert to that older version instead: https://ci.appveyor.com/project/ZNix/openovr/builds/44353680/job/ab9sh3fntl2pn57v/artifacts Edited August 25, 2022 by mbucchia I wasn't banned, but this account is mostly inactive and not monitored.
alertic Posted August 25, 2022 Posted August 25, 2022 18 hours ago, Burt said: I’m having issues with loosing the mouse every once in awhile after last weekends update. Same, I did a rollback to an older openvr_api.dll (version 1.0.860) and it works again. I have OpenComposite systemwide install tool and just replaced vrclient_x64.dll with the old openvr_api.dll (renamed)
Burt Posted August 25, 2022 Posted August 25, 2022 5 hours ago, alertic said: Same, I did a rollback to an older openvr_api.dll (version 1.0.860) and it works again. I have OpenComposite systemwide install tool and just replaced vrclient_x64.dll with the old openvr_api.dll (renamed) Okay thanks I may have to look in of that if it gets really bad. Kinda new to OXR. ALIENWARE R11 - I9 10900KF @ 5.1 GHz - M.2 NVMe 2TB - RTX3090 - XFURY 64GB -3400 MHz RAM Monitor AW3420DW @ 120Hz - Virpil CM3 Throttle - TM TPR Rudder pedals - Virpil CM2 w/TM Hornet Stick Center - Monstertech Deck Mounts RealSimulator FSSB-R3 Lightning Base w/ F16SRGRH SideStick - VR user / Varjo Aero - Big Thx to mbucchia Start Date April 2020
GPatricks Posted August 26, 2022 Posted August 26, 2022 (edited) Curios, what function do your hands have in DCS VR? Edited August 26, 2022 by =LD=Icer 1 GIGABYTE X870E AORUS Elite WIFI7, Thermaltake 1200w PS \AMD Ryzen 7 9800X3D - Corsair iCue Titan Liquid CPU cooler \ 64GB G.Skill Z5 DDR5 \ SBlasterX G6 \ 4TB NvMe M.2 Boot Drive \ Zotac GeForce RTX 4090 Trinity 24GB - Nvidia 576.80 drivers \ 3 Samsung LC32G53TQWUXEN 32" 7680x1440 at 144Hz Gsync \ Win11 Pro Ver. 24H2 - Build 26100.4351 \ TIR 5 \ Warthog HOTAS with VirPil stick base \ MFG V3 Pedals \ TM MFDs on 2 8" Lilliputs \ Simgears ICP \ Varjo XR-3 VR
horstweihrauch Posted August 26, 2022 Posted August 26, 2022 Never even unpacked my g2 controllers 1 Darkstar: Merged
Marco Schaap Posted August 27, 2022 Posted August 27, 2022 21 hours ago, horstweihrauch said: Never even unpacked my g2 controllers Me neither, hoping my PointCTRL will be produced in reasonably short time. I ordered in july 2021 1 AMD Ryzen 7 5800X3D, MSI X570 Tomahawk, 32GB G.Skill F4-3600C15D @ 3866C14, ASRock Taichi 7900XTX, HP Reverb G2, VPC WarBRD-D & Thrustmaster F16 Viper & F18 Super Hornet, Thrustmaster Warthog Throttle.
LtSpoon Posted August 27, 2022 Posted August 27, 2022 Hey Since the last beta update and the opencomposite update, my game loads for a very long time, about 3-4 minutes and the fps are also bad. Anyone advice? Only the BETA and OpenComposite have been updated! Spoon AMD 7800X3D | Asus TUF Gaming X670E Plus | Kingston Fury Beast DDR5 64GB @6000MHz| NVIDIA 4090 FE | DCS only @ M.2 WD SN850X 1TB | Pimax Crystal Light | TM Warthog | TM Pedals | | My F-18 Rogers SimPit
Hammer1-1 Posted August 27, 2022 Posted August 27, 2022 7 minutes ago, LtSpoon said: Hey Since the last beta update and the opencomposite update, my game loads for a very long time, about 3-4 minutes and the fps are also bad. Anyone advice? Only the BETA and OpenComposite have been updated! Spoon deleted your fxo and metashaders folder in saved games? Intel 13900k @ 5.8ghz | 64gb GSkill Trident Z | MSI z790 Meg ACE | Zotac RTX4090 | Asus 1000w psu | Slaw RX Viper 2 pedals | VPForce Rhino/VKB MCE Ultimate + STECS Mk2 MAX / Virpil MongoosT50+ MongoosT50CM | Virpil TCS+/ AH64D grip/custom AH64D TEDAC | Samsung Odyssey G9 + Odyssey Ark | Next Level Racing Flight Seat Pro | WinWing F-18 MIPS | No more VR for this pilot. My wallpaper and skins On today's episode of "Did You Know", Cessna Skyhawk crashes into cemetery; over 800 found dead as workers keep digging.
edmuss Posted August 27, 2022 Posted August 27, 2022 On 8/26/2022 at 4:11 PM, =LD=Icer said: Curios, what function do your hands have in DCS VR? I click all of the cockpit controls with mine, leap motion is lovely once set up right Ryzen7 7800X3D / RTX3080ti / 64GB DDR5 4800 / Varjo Aero / Leap Motion / Kinect Headtracking TM 28" Warthog Deltasim Hotas / DIY Pendular Rudders / DIY Cyclic Maglock Trimmer / DIY Abris / TM TX 599 evo wheel / TM T3PA pro / DIY 7+1+Sequential Shifter / DIY Handbrake / Cobra Clubman Seat Shoehorned into a 43" x 43" cupboard.
LtSpoon Posted August 27, 2022 Posted August 27, 2022 vor 26 Minuten schrieb Hammer1-1: deleted your fxo and metashaders folder in saved games? yes, fxo and metashaders deleted AMD 7800X3D | Asus TUF Gaming X670E Plus | Kingston Fury Beast DDR5 64GB @6000MHz| NVIDIA 4090 FE | DCS only @ M.2 WD SN850X 1TB | Pimax Crystal Light | TM Warthog | TM Pedals | | My F-18 Rogers SimPit
Sr. Posted August 27, 2022 Posted August 27, 2022 39 minutes ago, edmuss said: I click all of the cockpit controls with mine, leap motion is lovely once set up right Do tell... I returned one last year out of frustration. Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC | Samsung 970 Evo 2TB NVME | Quest 3 | Logitech X-56 throttle | VKB NXT Premium | Win 11 "Any sufficiently advanced technology is indistinguishable from magic." --Arthur C Clark
edmuss Posted August 27, 2022 Posted August 27, 2022 14 minutes ago, Sr. said: Do tell... I returned one last year out of frustration. The Gemini drivers released early this year made the tracking much more robust, the DCS implementation still has its foibles but it is getting better. The most important part is getting the environment optimally set up, before I did that it was frustration on confusion. Now the only time I can't use leap to activate cockpit controls is when they're physically occluded (think SAS controls to the left of the warthog throttle) or where the physical constraints of the environment prevent it; the walk in cupboard my rig is in means that quite a lot of the side controls aren't achievable because my hand hits the wall before I can reach the virtual switch. All in, because I only paid 30 quid for it on eBay it's one of the beat value investments I've made for DCS vr with regards to immersion 1 Ryzen7 7800X3D / RTX3080ti / 64GB DDR5 4800 / Varjo Aero / Leap Motion / Kinect Headtracking TM 28" Warthog Deltasim Hotas / DIY Pendular Rudders / DIY Cyclic Maglock Trimmer / DIY Abris / TM TX 599 evo wheel / TM T3PA pro / DIY 7+1+Sequential Shifter / DIY Handbrake / Cobra Clubman Seat Shoehorned into a 43" x 43" cupboard.
Sr. Posted August 27, 2022 Posted August 27, 2022 24 minutes ago, edmuss said: The Gemini drivers released early this year made the tracking much more robust, the DCS implementation still has its foibles but it is getting better. The most important part is getting the environment optimally set up, before I did that it was frustration on confusion. Now the only time I can't use leap to activate cockpit controls is when they're physically occluded (think SAS controls to the left of the warthog throttle) or where the physical constraints of the environment prevent it; the walk in cupboard my rig is in means that quite a lot of the side controls aren't achievable because my hand hits the wall before I can reach the virtual switch. All in, because I only paid 30 quid for it on eBay it's one of the beat value investments I've made for DCS vr with regards to immersion Interesting. I may have to give it another shot. Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC | Samsung 970 Evo 2TB NVME | Quest 3 | Logitech X-56 throttle | VKB NXT Premium | Win 11 "Any sufficiently advanced technology is indistinguishable from magic." --Arthur C Clark
skyteam50 Posted August 27, 2022 Posted August 27, 2022 On 8/20/2022 at 1:35 PM, Sr. said: Thanks! That got it. Sr. read the question you asked about the error message you are having in OpenXR Runtime. Also saw mbucchia reply. However I do not understand what to do. You solved your problem but did not explain how you managed to do it. Would you be able to explain in a detailed step by step approach what I need to do. Have searched the Registery Editor for the line stated by mbucchia but it does not exist on my system. I have found "Khronos\OpenXR\1\ApiLayers\Implicit". This leads me to a directory referencing OpenKneeboard, which I have installed. mbucchia does say this would be one of the programs causing this problem. Would you be able to point me in the correct direction please.
dburne Posted August 27, 2022 Posted August 27, 2022 8 hours ago, Marco Schaap said: Me neither, hoping my PointCTRL will be produced in reasonably short time. I ordered in july 2021 You should I think be getting very close , and yes it is so worth the wait. 1 Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero|
Sr. Posted August 27, 2022 Posted August 27, 2022 On 8/24/2022 at 6:28 AM, Burt said: I’m having issues with loosing the mouse every once in awhile after last weekends update. My system used to do this fairly often, even before OpenXR. To avoid it, II make sure there are no other windows present (minimized) on the desktop while DCS is launching. Also, once I launch DCS and the ED screen shows, I will give it a single click with the mouse. Beyond that, any other time it's occurred and I didn't catch it before sitting down in the seat, I would simply grab one of the G2 controller, turn in on, point it's cursor at the screen, press the menu button, push it again to exit, then shut off the controller... which somehow restored the mouse pointer. 1 Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC | Samsung 970 Evo 2TB NVME | Quest 3 | Logitech X-56 throttle | VKB NXT Premium | Win 11 "Any sufficiently advanced technology is indistinguishable from magic." --Arthur C Clark
Sr. Posted August 27, 2022 Posted August 27, 2022 56 minutes ago, skyteam50 said: Sr. read the question you asked about the error message you are having in OpenXR Runtime. Also saw mbucchia reply. However I do not understand what to do. You solved your problem but did not explain how you managed to do it. Would you be able to explain in a detailed step by step approach what I need to do. Have searched the Registery Editor for the line stated by mbucchia but it does not exist on my system. I have found "Khronos\OpenXR\1\ApiLayers\Implicit". This leads me to a directory referencing OpenKneeboard, which I have installed. mbucchia does say this would be one of the programs causing this problem. Would you be able to point me in the correct direction please. Can't say specifically as to open kneeboard, but I just drilled down through the registry as he posted. He does say that it is for removing stale/uninstalled instances. Which for my error was the issue... I had uninstalled VR NeckSafer then noticed the WMR Runtime entries tab was emptier than I remembered. Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC | Samsung 970 Evo 2TB NVME | Quest 3 | Logitech X-56 throttle | VKB NXT Premium | Win 11 "Any sufficiently advanced technology is indistinguishable from magic." --Arthur C Clark
Burt Posted August 27, 2022 Posted August 27, 2022 Great Sr. I’ll give those suggestion a go. I’ll also knock the dust off my controllers too. Appreciate it ALIENWARE R11 - I9 10900KF @ 5.1 GHz - M.2 NVMe 2TB - RTX3090 - XFURY 64GB -3400 MHz RAM Monitor AW3420DW @ 120Hz - Virpil CM3 Throttle - TM TPR Rudder pedals - Virpil CM2 w/TM Hornet Stick Center - Monstertech Deck Mounts RealSimulator FSSB-R3 Lightning Base w/ F16SRGRH SideStick - VR user / Varjo Aero - Big Thx to mbucchia Start Date April 2020
LtSpoon Posted August 28, 2022 Posted August 28, 2022 vor 22 Stunden schrieb LtSpoon: Hey Since the last beta update and the opencomposite update, my game loads for a very long time, about 3-4 minutes and the fps are also bad. Anyone advice? Only the BETA and OpenComposite have been updated! Spoon sorry for quoting myself. Still have the problem ! If i switch back to SteamVR, DCS loads 10 times faster. OpenXR 8-10 Min to Server, SteamVR 1-2 Min. When loading DCS with OpenXR, I see the 3 rotating circles for 5 minutes alone. Any Ideas ? AMD 7800X3D | Asus TUF Gaming X670E Plus | Kingston Fury Beast DDR5 64GB @6000MHz| NVIDIA 4090 FE | DCS only @ M.2 WD SN850X 1TB | Pimax Crystal Light | TM Warthog | TM Pedals | | My F-18 Rogers SimPit
Sr. Posted August 28, 2022 Posted August 28, 2022 33 minutes ago, LtSpoon said: sorry for quoting myself. Still have the problem ! If i switch back to SteamVR, DCS loads 10 times faster. OpenXR 8-10 Min to Server, SteamVR 1-2 Min. When loading DCS with OpenXR, I see the 3 rotating circles for 5 minutes alone. Any Ideas ? Check your AV folder/application exclusions/permissions? 16 hours ago, Burt said: Great Sr. I’ll give those suggestion a go. I’ll also knock the dust off my controllers too. Appreciate it It's literally the only I ever use a controller for Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC | Samsung 970 Evo 2TB NVME | Quest 3 | Logitech X-56 throttle | VKB NXT Premium | Win 11 "Any sufficiently advanced technology is indistinguishable from magic." --Arthur C Clark
LtSpoon Posted August 28, 2022 Posted August 28, 2022 vor 2 Stunden schrieb Sr.: Check your AV folder/application exclusions/permissions? It's literally the only I ever use a controller for AV Folder ? Antivrius ? sorry for the stupid question.... I only use the Windows Security. OpenXR allowed public&private AMD 7800X3D | Asus TUF Gaming X670E Plus | Kingston Fury Beast DDR5 64GB @6000MHz| NVIDIA 4090 FE | DCS only @ M.2 WD SN850X 1TB | Pimax Crystal Light | TM Warthog | TM Pedals | | My F-18 Rogers SimPit
Sr. Posted August 28, 2022 Posted August 28, 2022 2 hours ago, LtSpoon said: AV Folder ? Antivrius ? sorry for the stupid question.... I only use the Windows Security. OpenXR allowed public&private Yep, Windows Security. Here in particular. Good way to test would be to shut it off and see if it occurs. Ryzen 7 5800X3D | 64GB DDR4 3600| MSI RTX 4080 16GB Ventus 3X OC | Samsung 970 Evo 2TB NVME | Quest 3 | Logitech X-56 throttle | VKB NXT Premium | Win 11 "Any sufficiently advanced technology is indistinguishable from magic." --Arthur C Clark
dooom Posted August 29, 2022 Posted August 29, 2022 help something seems to be messed up with my OXRTK settings... i was playing with the resolution override in my last session and had made a change before i logged out... problem is, now that i am attempting to log back into DCS it doesn't seem to be launching into vr.. to the contrary, it launches in the headset and displays on the 2d panel window in headset... my desktop resolution drops dramatically and screws up my icon arrangements. I cannot launch OXRTK as the dcs app is not launching in vr. I would like to reset the resolution overide back to a different value but cannot access the OXRTK menu because I cant get into VR. Any ideas what i could do? ASUS Tuf Gaming Pro x570 / AMD Ryzen 7 5800X @ 3.8 / XFX Radeon 6900 XT / 64 GB DDR4 3200 "This was not in the Manual I did not read", cried the Noob" - BMBM, WWIIOL
Nodak Posted August 29, 2022 Posted August 29, 2022 Go into your user/x/saved games/DCS/Config and change its folder name, it'll make a new default one next time you fire it up, than you can reset. Grab the stuff you need out of the renamed backup, mainly your input for key and stick commands.
dooom Posted August 29, 2022 Posted August 29, 2022 ok that worked - thanks. I have a question about upscaling for the reverb g2. should i be overiiding my resolution if i am using the upscaler? Right now i am overriding resolution to 3160 and have upscaler at about 70% (2120-ish) It feels like a crap shoot - is there a logic to it i dont understand? i read the oxr site about upscaling but it doesnt really make sense to my old brain. i just want to be able to read my f18 screens more clearly. ASUS Tuf Gaming Pro x570 / AMD Ryzen 7 5800X @ 3.8 / XFX Radeon 6900 XT / 64 GB DDR4 3200 "This was not in the Manual I did not read", cried the Noob" - BMBM, WWIIOL
Recommended Posts