All Activity

It's ridiculous to compare running an aircraft engine with a constant speed propeller at max power to running a car in first gear. It's more like running a car with a CVT at max power. Which is what you do any time you want maximum acceleration and/or speed. The aircraft is equipped with reduction gears and and a constant speed propeller. As aircraft speed increases the propeller pitch increases as well so that the propeller always takes the appropriate "bite" out of the air. If running the propeller at lower RPM would have given more speed they would have done so. However, at very high altitude, i.e. low temperature, the blade tips go transonic and propeller efficiency is dramatically reduced. The manual says to use 2550 RPM and full throttle for WEP above 25000 feet.

For 9.12a to get R-77 radar upgraded is needed. This involves replacement of C100 with C101/102 (offer to Yugoslavia from 1996, sadly never accepted), which bring new modes. In addition the radar installation itself extension so it can actually guide R-77. Is this what you meant?

Hi, The problem is solved. Something has changed my VoiceAttack settings and bindings keys in the DCS game. All the time, when I used PTT FR22, an intercom was working instead of the radio. I did not notice that before. Stulee

For me, and this changed my mind to never want to use a wireless VR hmd again, their biggest caveat besides compression is latency. For sims with HOTAS or steering wheels, latency has a huge impact. I was using VR streaming with a standalone HMD for two years and got used to it, but the moment i tried the PSVR2 with cable in a helicopter was a real eye opener. All of a sudden i had direct control over the aircraft, rudder, cyclic and collective felt so much different than before. I'll never go back.

This seems to be it: https://www.navysite.de/what/bridgewing.htm

You can assign any button to toggle mouse view panning. It switches between paning and the cursor. The default bind is Alt+C for most of the aircraft.

I'm sorry, but it's full of nonsense.This is only according to his information.Which he did not prove in any way. The P-77 cannot be launched in STT. It works according to a different algorithm in which an overview of other goals is preserved.

You know that just saying "ED team" means absolutely nothing? @BIGNEWY @NineLine Can you help the guy?

I mean where I was we had ANA and stuff, so I agree, we need some more assets to flesh a scenario out though, as I'm sure modders will do it down the road, or we may get lucky with ED doing it.

I didn't find anything online and decided to ask here. Perhaps I did not form my question correctly in English. If it's not difficult for you, leave a link.

I use a mouse with extra klicks/keys with moving the mouse wheel left or right. So I avoid the double klick and just do a right klick on the wheel. It's also just a workauround - not what you've asked for, I know.

There is a Pimax subforum.

Да, прочитал не внимательно...

On my case, I’m dedicated to learning the Corsair at Marianas ww2, and afterwards I’d like to return to the Viggen to fly this campaign:

Thanks! I tried it. It is better than nothing but the double click is a pain. A temporary button would be way better. As well as options for mouse speed and smoothness. I guess I should submit a request in Wishes sub forum. Best regards, Pierre

I'm going to resume it to you in nine lines: Of course! I’ll spend the same amount of time making that short track file as ED's spent improving the FM-DM of this specific model (and of all warbirds in general) over the past decade. With this I’m not saying I won’t do it…I’m just copycatting ED’s philosophy: never say no to any complaint and just postpone a solution (something that’s been working for more than ten years). In any case, and as possible reference material to work on, I recommend you take a look at all the end user complaint posts since the much-hyped new DM was implemented quite some time ago. With nothing further, please accept my best regards and I’ll be waiting for further news (though I’ll take a seat, since this issue has been in “the priority queue of a small group of talents doing what they can for so long that hardly anyone here even remembers anymore”).

Has anyone else built this yet? I made the original with the button matrix a few years back and now have a PCB but my design abilities are not great, so I haven’t been able to modify the original design to encompass the PCB. Has anyone else managed to do this and use the PCB?

Если не считать официального сообщения о переносе раннего доступа на сентябрь, то первая.

Hi dear community, I have recently started tinkering around adding RSBN data into Marianas scenery for the loved Mig 21. I have added the "Marinas" scenery to the R_NAV_data.lua Maps_Table list. For testing purposes, I have copied one of the existent R_NAV_data_[scenarios].lua with the Andersen values for 06L for "RSBN_data_Marianas" { airbase = 'Andersen', -- 1 lat = 13.58035, long = 144.91567, alt = 531,-- rwy = 066,-- length = 8500, code = '-- .- -. ' --/N/ MAN_ }, And for ARK secto 1 I, channel 1 country = 'GUAM', --1 / absolute 1 freq = 999, lat = 13.58035, long = 144.91567, location = 'Andersen', -- code = '.-.. -.-- .- ' --/N/ LYA_ As you can Imaging, this doesn't work. I would like to know if anybody can provide some advise how can it make it work. Cheers!

Added a layer of electrical tape to cams. Works great (for)now.

Cannot confirm. Tried again yesterday with a dogfight I won. After a few turn "I" started firing into the blue sky, and very soon the bandit was behind me and killed me.

Это какая уже по счёту примета?

Until recently the WW MIP screen(3) have performed flawlessly, with SimAppPro open and the MIP loaded and arranged correctly - DCS now hangs / stutters or freezes once into the initial loading screen. This only occurs when the screens(3) are connected. I've applied all the usual stuttering fixes found in other forums, Process Lasso is running as advertised, separate powered hub for the screens, tired different versions of SimAppPro, fresh DCS install, different DisplayLink drivers, different versions of the Nvidea drivers and tried numerous settings within the DCS graphics setting... (Not a VR user - yet) ...once the screens(3) are disconnected everything runs like butter, even with SimAppPro, Buttkicker, TrackIR, and multiple Virpil control panels I've reached out to Winwing and ED and they both confirm theres is an issue, but have yet to identify / isolate or offer a possible solution, so I'd thought I throw the issue here, see if anybody has any suggestions. Expanding on this, I ran LatencyMon and found high numbers on drivers/service ntoskrnl.sys and Wdf01000.sys Im not sure what these are but it clear that CPU resources are spending all their time in those 2. any thoughts gents...? Asus Z790 Hero, Intel 14900K, 96GB RAM Dominator, RTX 4090 Suprim, Samsung 990 Pro 2TB M.2(2)

I live in the Philippines and unless I use a VPN to change my country, I am unable to update DCS. The update keeps timing out. When I activate my vpn and change my country to somewhere like New Zealand, the updates go off without a hitch. That's well and good on my main computer but I am trying to set up a dedicated server where my squadron and I can play missions together. On that computer, I do not have any VPN software enabled and thus cannot update. Feels like discrimination.