Leaderboard

Happy Birthday Tito! :holiday::cheer3nc::yay::drunk: Welcome to the club!

For the last 3 years of IL2 I've been thinking about building an Aker-Barnes but actually using this: BlackShark, and an imminent collective mod from Urze has forced me to come up with something a bit better. I already had the MDF, and an hour on Google Sketchup produced this: The hardest part of any build - starting. But soon had the main pieces cut: I had help obviously: Assembled, sealed and a can of Halfords car primer later... The rear access panel for the sub woofer: The business end: Still a little bit of tweaking required to get it just right, but seems pretty good so far! And a nice feeling of "I made that" :D

...

All the best mate :)

Блин вот я поражаюсь таким людям. Когда я в свое время только-только купил Локон, у меня вообще не было интернета. Я не задавал глупых вопросов типа: "Как включить радар на Су-25?" и "Что такое АРГСН и чем она отличается от ПАРГСН", потому что просто некому было их задать. И до всего приходилось доходить своим умом, при помощи обучающих треков и реже мануала. И как ни странно к моменту, когда я впервые полетел в онлайне, (примерно полтора года назад), я уже весьма неплохо знал Локон, единственное разве-что не умел толком уходить от ракет, но это не помешало мне в первые дни полетов в онлайне показывать относительно неплохие результаты. Мне вот интересно что-бы сейчас делали уважаемые товарищи Сухой27, alex12345, и им подобные если-бы у них не было инета? Кому-бы они задвали все свои вопросы, кому-бы предъявляли претензии? П.С. помниться както полгодика назад на РАФе видел чувака, который спрашивал как запустить движки... П.П.С. поздравте у меня юбилей 400 пост :)

Horse head nebula (copyrighted) http://www.astropix.com/HTML/SHOW_DIG/037.HTM NGC6960 (veil nebula) Great nebula in Orion Rho Ophiuci Le gentil 3 (copyrighted) http://www.astropix.com/HTML/SHOW_DIG/076.HTM Pismis 24 Hubble shot Majestic sombrero galaxy Crescent moon (copyrighted) http://www.astropix.com/HTML/SHOW_DIG/017.HTM ISS (copyrighted) http://www.astropix.com/HTML/SHOW_DIG/051.HTM Moon (copyrighted) http://www.astropix.com/HTML/SHOW_DIG/073.HTM Total lunar eclipse (copyrighted) http://www.astropix.com/HTML/SHOW_DIG/020.HTM

Маленькая пробная миссия Костёр.miz

EDIT: This post describes how to use my TouchBuddy profile with a three monitor setup. See my later post further down in this thread if you only have two monitors. Hi all, I've been doing a bit more tinkering with my multi-monitor setup and have managed to get the view forward on one screen, Shkval on another and this: ...on a third (touch) screen. Thanks to TouchBuddy, all the buttons and switches are touchable (or clickable with a mouse if you don't have a touchscreen), and they all have the same effect as their VC counterparts. I've uploaded a short video here so you can see the profile in use (apologies for the quality, it was taken on my phone's dodgy camera). If you have three monitors and would like to try the setup yourself just follow the instructions below. If there's sufficient demand I might make a version for two monitor setups too. Finally, a big thank you to Zorlac for creating the excellent TouchBuddy and Wild Bill Kelso for his TouchBuddy Toolkit. Cheers, DD Installation 1. Download and install Touchbuddy. 2. Backup the following files: Eagle Dynamics\Ka-50\BlackShark\data\scripts\options.lua Eagle Dynamics\Ka-50\FUI\Common\StartImage-2.bmp Eagle Dynamics\Ka-50\Config\Export\Export.lua TouchBuddy\touchbuddy.cfg 3. Download this file to a temporary directory and unzip it. You should see four folders (BlackShark, Config, FUI and profiles) and a touchbuddy.cfg file. Copy and paste the BlackShark, Config and FUI folders to your Eagle Dynamics\Ka-50 folder, overwriting the existing files (which you've already backed up in the previous step). Then copy and paste the profiles folder and the touchbuddy.cfg to your TouchBuddy folder, again overwriting the existing files. 4. In your graphics card control panel, set your monitors to Dual View mode and all their resolutions to 1024x768. 5. Check in Windows desktop properties that your monitors are arranged in a horizontal row with the ABRIS monitor on the LEFT, main monitor in the center and Shkval monitor on the RIGHT. 6. Open the file touchbuddy.cfg in your Touchbuddy folder with Notepad and scroll down until you see the following line: lomac_data_file = C:\Sims\Eagle Dynamics\Ka-50\touchbuddy-export.dat Edit the path to match the location of your Ka-50 folder and save your changes. 7. Launch TB and load whichever profile suits the mission's starting conditions (either DCS-DickDastardly-prestartup.tbc or DCS-DickDastardly-inflight.tbc). Then click the "Let's Go" button and the panel should appear on the monitor on which you'll be viewing the ABRIS. 8. Launch the sim and select "Options" then "Controls" and change the key assigned to "Expedite Emergency ATGM Launch" to "J". Now load a mission and you should see a test card on your Shkval monitor during mission loading if everything is setup correctly. Once you unpause, the Shkval, ABRIS and payload strip should all be live and you'll be able to touch (or click) any of the buttons to trigger the appropriate key presses. N.B. The monitor on which I display the ABRIS is actually 5:4 rather than 4:3. If your monitor has a different aspect ratio then the image will be slightly stretched. Also, I've only tested this setup in Vista and the English version of DCS so I can't promise it'll work in XP or the Russian version (though I think it will). Limitations 1. It doesn't seem to be possible to obtain the state of most switches and button lights via lua so TB can only deduce what state they should be in by knowing their initial position and keeping track of the number of times they've been pressed in TB. This means that if you click a button in the virtual cockpit then Touchbuddy won't know about it and will get out of synch. (If this happens you can either continue clicking in the VC until the positions match up again or press the "Reset button status" command on the *TB* tab). 2. The CMS display can only show the currently selected program as the number of flares remaining per side isn't obtainable via lua. (The total number of flares remaining is visible in the payload strip, however). 3. The PVI-800 display doesn't change, again due to a lack of data from lua. Hopefully the forthcoming Physical Cockpit Interface Package will give us the ability to export things like the nav display and keypad lights, along with the CMS display and EKRAN (ideally in the same way that the Shkval and ABRIS are currently). 4. The button to change the Nav/INU fixtaking method (labelled NAV TG SHKVL on my version of the Nav keypad) doesn't work. This seems to be due to a bug in the sim whereby no matter what keys you assign to this function, they have no effect. The only way to trigger it is by clicking the switch in the VC.

The long awaited Galeb G4 by the makers of Galeb G2 model is nearing completion. The release date isn't set (sounds familiar? :D) but I love this picture of how they test the virtual cockpit for accuracy :) Some other shots can be found here http://good-times.webshots.com/photo/2378050910053996385WqGBeD At first, only FS9 version will be available, with FSX version to come some months later. Unlike G2, this model will be payware :( but I think that most will agree that for the quality that they deliver - they deserve the money! :)

the back armor has been rebuild [ATTACH]25257[/ATTACH] also the top of the canopy [ATTACH]25258[/ATTACH]

ждал, долго ждал!!! купил в первый же день до полудня :), жена долго не понимала меня и смотрела косо, спасибо ребята, на этот момент это единственный сим вертолётный, ждём от вас ми-8, 24, ка 52 ... у меня и регистрция это дата выхода :)

Предлагаю закончить обсуждение дисковой защиты. Ни к чему хорошему это не приведет.

Видеоролик боя на основе версии 1.03, которая находится в разработке и которую собираются зарелизить 31 марта. :)

Very Cool

Да что тут говорить! Большое спасибо разработчикам, всем-всем, кто принимал участие в создании. :thumbup: Жаль только, видел в каком-то дурацком журнале, лучший симулятор - ЕМНИП FIFA 2009. Мне жалко редакторов и читателей этого журнала.:(

Nope - Dreamt of being a Womble, Burrowing and Livin' underground :D

It was recently brought to my attention that some would like the server messages removed on the 159th_Dedi, in the name of realism. I'm putting up this poll, so I can get an idea of what the community wants. Please vote and explain.

Thanks everyone!

AirTito!! All the best :D

Nice model, can't wait to shoot down this baby :D

Happy Birthday Тихор

Happy Birthday! :)

Честит рожден ден, Тихомир! Happy Birthday! All best wishes!

Nah.. in Russia they turn the whole damn airport into a "x"

Happy Bday MAN!

Every single time I read Tito it reminds me of Josip Broz Tito :) Happy Birthday mate !

Happy Birthday Comrade Tito!!! :drunk:

HAPPY BIRTHDAY !!!!:yay::juggle::clown_2::prop::cheer3nc:

- можно, но запрещено :music_whistling:, даже подвешивать однотипные блоки с разнотипными боеприпасами на симметричную пару подвесок - настоятельно не рекомендуется подвешивать АБП, одинаковые по назначению, но разные по типу, либо одинаковые по типу, но разные по назначению, например: 1. Б13 - Б8В20А - Б8В20А - Б13 2. ФАБ250 -ФАБ500 - ФАБ500 - ФАБ250 3. Х25МЛ - Х25МР - Х25МР - Х25МЛ и т.д. ну и схема вариантов для Ка-50

К сожалению мы не можем удовлетворить всех любителей и ценителей боевых авиасимуляторов во всех их пожеланиях. В настоящее время мы делаем то, что мы можем сделать относительно быстро и качественно, с учетом наработанного задела, это А-10С. Далее будет видно. Прошу отнестись с пониманием к нашей позиции, мы физически не можем воплотить все пожелания пользователей. Но пытаемся сделать то, что реально можем сделать. Выше головы прыгать сложно.

Присоединяюсь к akira_ag. На настоящий момент это лучшее, и, пожалуй, единственное в жанре. Спасибо. Не останавливайтесь на достигнутом. Успехов

Thats the one!! thx mvsgas

Вагоны будут те что есть сейчас, но с новыми моделями.

let me have your email address and i'll send you mine. pm

I realise this is beside the point of the thread, but in fact the tactic was to place the wingtip ahead of the V-1's in order to upset the airflow over it, and thereby the gyro. I'm pretty sure that if you physically nudged it, you were doing it wrong...

Wszystkiego najlepszego Poko! Jesteś wielki! :thumbup: :yay:

Happy b'day Poko. Are you and Kivi going to make another movie?

А нормально то не овтетить?

Other models by Sunrise: :thumbup: http://forums.eagle.ru/showpost.php?p=586476&postcount=6

I'm using one of Valerys nice images of his 3d models, They look great and make good wallpapers, check here... http://precise3dmodeling.com/

Permanent fix I went on the saitek site and looked a bit at the DirectOutput SDK forum. To me it appeared that something had to be compiled into a .exe or .dll by a programmer to use this so I did a bit of looking at the files and found this in C:\Program Files (x86)\1C\Eagle Dynamics\Ka-50\bin\stable\lua-direct_output.dll Only 1 thing I know of even uses DirectOutput...you guessed it...the X52/X52Pro I removed this file from the directory and tested again. Load mission,eject rinse repeat a few times. It worked flawlessly with no crashes and I was able to leave the SaiDOutput service running so I can still see the commands and stuff on my MFD. No more dumb message sent to my stick causing crashes. :thumbup: Maybe some others can test and verify if this fix corrects the problem on their system and post results?