Sacarino111

Hi. My two cents... I had that same issue, but with Single Thread version. MT was working ok. Did all the tricks I know, but no jay. Finally, I disconected from my LAN and conected back and BINGO! With both instances. I know my LAN is a bit weird, so maybe it is not of any help to other players. but I would give a try. Saludos. Saca111

HI all. IF your RAM is low (16 GB low!), try adding another 16 GB in the page file, from a SSD (if posible). I had problems with that map and "through the inferno" mission, but adding this extra RAM did the trick. If no SSD available, then add more RAM. Saludos. Saca111

+1

I have an X52 PRO, but I don't use any profile,if that is what you mean. Only Pinky as modifier inside the profiler an the twist for ZOOM control. For the axels: nullnull null nullnullnull

And you can try the "delette scenery object " (or something like that) at the begining of the mission, at least with the most obviouse objects Saludos. Saca111

Try lowering or rising the seat (RCTRl + NUMPAD 0 or RCTRL+NUMPAD 8 from the top of my head) and align the dot andthe cross then hit enter. I have to do so to properly align the BS, even usin TrackIr. I my case I hace to lower the seat... Saludos. Saca111

Hi Check graphic setting. I had similar issue, and it was becaouse I did put all to the max for some screeshots, and forgot to put them back in the sweet spot. Saludos. Saca111

I guess it is for thw Sinai map, isn't it? Saludos Saca111

Hi For the PC, go nuts!. Lots of RAM, lots of VRAM. CPU, etc well, go as hight as possible, but the bottleneck will be mostly VRAM and GPU. SSD drives also, and if need be, use a pagefile size the same as the RAM. For the cockpit: no need of any fancy setup (and I am a homepit guy myself). Enough space, good light and one or thwo monitors, so you can export MFD or similar. A good HOTAS (WINWING, VIRPIL) and pedals, with toe brake. Some head tracking (TrackIR is still the best option, but lots of workarounds). I don't have VR, so no advice here from me. And minimum, a set of Thrustmaster's MFDs. With that, you are ready to embarc in a very nice flying and learning experience. There are also the option of buiding your own gadgets, as UFC, ICP etc (my choice), but that depends on your skill level and time availability. There are many threads in this forum about the matter. All this is my approach, but most people fly with a normal HOTAS (pedals, always use pedals with toe brake), head tracking and the mouse. . That is enough to start, get a feeling on if you want to go deeper and then start adding MFD, and other combat panels. On the module subject, if you invest some good quality time, you will soon get to be proficient with any of them. Just one at a time, and check YouTube videos for learning ( @RedKite is my favourite https://www.youtube.com/@RedKiteRender), but lots of good material and tutoriasl out there. And the comunity is a really good place, with lots of people wanting to share the knoledge and the experience, so use a lot the forum! Any more advice, just ask. Saludos Saca111

Yes. And that bothered me a lot, to the point of not flying it for a long time... until I found the HUD trim knob, so now, every fly I make with the F-14, I trim the HUD display so the 0º line coincide with the horizon orwit the V.V. when the plane is stoped on the runway and the alignement is done. To me, having the V.V. on the 0 line helps a lot, I could not make myself to the other way. I know the HUD is not the main nav instrument on those day planes, but I was so used to it from all my life as a simmer that I couldn' thandle it. I don't have the F-1, so I can't tell if there is a HUD trim. Saludos. Saca111

Most probably it was due to the fact that the cannopy was open, so no radio or micro needed. Once the cannopoy is closed, you should not be able to talk to ground crew without the mic. Saludos. Saca111

Toca bajarse el mapa de las Marianas... Ya lo probaré este finde, si las elecciones me dejan. Saludos. Saca111

@Rudel_chw BOSS... Saca111

How sad... R.I.P. Saca111

Talk about being "burnt out" in your job... Saludos. Saca111

Impressive job! I have deone some UFC and ICP, and yours is a master piece! Some questions: Do the display work? Do you have the STL files to share? and, what board are you using? For my dashes, I use an Arduino Mega and the CVP joystick from https://forum.dcs.world/topic/97434-an-arduino-usb-hid-controller-composite-usb-controller . If you don't know it,you are missing something... 256 buttons per board, and 8 axels with a single USB used. Amazing! Congrats again. Saludos. Saca111

Yep! SSSSHHHHocking! Saludos. Saca111

Hi I read you have been in the axis config and that there was no difference; you should play with curvature (up to about +20/30), and a touch of deadzone (1 or 2). I did thiat way I managed to have decently. Saludos. Saca111

Hi. GO check this link: Amazing. I have three of them plugged in as different controllers and I have more buttons/joysticks than I can handle! Worth a try, sure.... Saludos. Saca111

Hi. I am with Razo+r; really no need to use any outside configuration tool. The DCS setup possibillities are so hight that I stoped using the Saitek Software profiler at all. As said above, most joystick have a predefined configuration, witch works ok for the most of the modules. In case you are not happy with it, check the manual and try to replicate as closer as you can the real thing. The problem with that is that for each module you will have a particular setup to remember, and this can be overwhelming. the other option is to adapt all the modules to your personal taste, so one general layout is ok for all modules (more or less). Use the built in setup of DCS, is my recomendation. Saludos. Saca111

Hola. Prueba a tirar un poquito de la palanca, para estar segur de que no hay Gs negativas... Saludos. Saca111

Hola. Acabo de comprobarlo y a mi no me hace nada raro... Para lanzar en modo CCIP lo que hago es picar mucho, hasta que aparece la línea y el círculo, y entonces lanzo y no me da problemas. Es así como tú lo haces? Si necesitas más pruebas, hoy puedo ayudarte. Saludos. Saca111

Hi. Check "easy comms" on or off (depending on what you wanted) and that the radio is on and on a channel