razo+r

No, it is not part of the autostart.

Are you 100% sure? When I place down a KA-50 for the USA for example, orders given to the wingman are in english. Do you have any mods? If yes, have you tried removing them and running a repair? The english with russian accent is the best you get since a lot of the sounds have been encrypted.

There are three easy options that will work: - Force player to lower their game volume - Remove the music - Remove FC airplanes. Some options I can think off, but they won't work well: - Force on/off the music with triggers. Either via F10 menu on user preference, un/muting the music for everyone or only when a FC plane spawns. - Place a vehicle that broadcasts the music behind terrain, so people only hear it in a specific location.

There is no volume control. If you want them to enjoy the mission without getting a headache, you as the mission designer need to get creative, or remove FC aircraft from the mission all together.

The Su-25 in DCS has simplified communication/radios like all FC3 aircraft. They listen to all frequencies at all times. You cannot change any frequency, as this is not modeled.

I have checked your mission. The problem is, you hit enter after typing in "PP1". It seems you are not allowed to add anything after in there, not even hit enter. If you do hit enter like you did, the game does not recognise it. After I removed the "enter" from the comment field, DST position 36 got populated with your point.

Have you already tried removing any of your mods (not modules, mods like A-4 or anything similar) and running a repair? After you have done that, can you try again to see if anything changed? If nothing changed and you can still see points jumping and changing, can you upload a track of it happening?

Set it to a country that speaks english.

(Sorry for the 3rd quotation in such a short time. I've just gotten around now to try it) If you place down a "INU FIX POINT", it will populate position 41 and onwards in your DST page. Summary: In the editor, you have two points to add: "Navigation Target Point" and "INU FIX POINT". "Navigation Target Point" requires you to input a name into the comment field. If you don't add a name, like PP1, RP1 or WPT1, it will NOT populate any position on your DST page. WPT (though may conflict with already set waypoints) should populate DST position 1 to 30. PP should populate DST position 36 to 39. RP should populate DST position 31-35. "INU FIX POINT" has no comment field to enter any name. Placing one down will populate DST page 41 and onwards. DST position 40 is reserved for your SPI, created by your onboard sensors and can constantly change depending on what you are currently targeting.

I don't see the same as you do. If I place down a Navigation Target Point with the comment field blank, there is no PP, no RP, no SPI and no waypoint generated. If I enter "PP1" in the comment field, it correctly enters that NTPoint as a PP at position 36 in the DST page. I think at this point it's a good idea if you provide a short track or at least the mission so we can see your setup.

Waypoint 40 is not the PP waypoint, it's your SPI. You can easily check this. For example, go to AG mode and open the DST page. You'll see a SPI will be generated and Waypoint 40 is populated. Now move your cursor around and designate that point. Notice how the coordinates for waypoint 40 change. PP waypoints will be number 36 to 39.

Like I said, did you make sure that the Ka-50 in the mission you are flying is set to an english speaking country? Did you check that?

Are they just turned off or actually missing?

Usually if your stick is not centered perfectly, you cannot engage BAlt. Check your stick and add a deadzone if necessary. Otherwise slightly nudging the stick around if you know it is always offcentered can also help.

Have you already tried changing the country to an english-speaking one or also making sure you are part of the blue coalition?

Which training mission? What is the "dial top left cockpit number"? Do you mean the trim gauge/indicator? Did you check your controls? Are the keys you are being told to press the correct ones for whatever you are trying to achieve?

Because of the ARI like Nealius mentioned above.

Hast du auf der Website von DCS geschaut? Falls es das Handbuch dort nicht gibt, schau trotzdem in deinem Rechner nach (Installationsverzeichnis von DCS, Dcs World/Mods/Aircraft/XYZ/Doc). Du kannst es ja auf dein iPad laden/schicken/schieben.

No, wings level and rudder only after touchdown.

Why make it easy when you can make it complicated. After you touch down the aircraft will straighten itself so then you'll just do a normal aerobraking and rollout. There is nothing additional you have to do in a crosswind landing with the F-16.

Answer is here:

Are you 100% sure that is the Navigation Target Point? To me it just looks like you are designating your waypoint 1 as a SPI. I mean, the waypoint is labeled as "1" on the HSD, you have waypoint 1 selected on your UFC and that Navigation Target Point that is supposed to be bottom right of waypoint 1 isn't shown on the HSD. In both pictures the point is exactly 18.7 miles away while there should be a difference in distance between wpt 1 and NTPoint. They are also at the same bearing from you but as you show in the picture, the NTPoint is more to the east than WTP 1. So I don't think you are actually targeting NTPoint 1, but your ordinary WPT 1. It is weird though that it jumps to ground level. You did not press any other button, right? Otherwise I guess "auto" mode automatically puts the point at ground level. I will try it out once I have the opportunity to see myself what is going on. But so far, you just seem to target your normal waypoint 1, while the NTPoint 1 you added does not exist in your flight plan because you did not give it a name, so the point is not recognised and not added.

Sorry, what exactly do you mean by that?

That is not the name, that is just the number of navigation target points you have placed down. The name for that point goes into the comment field below.

I don't have the files but you can download youtube videos and convert them to audio files, if you have the time for that.