Florence201

As the title says. Loaded triple Mavs, D&K and despite locking in the weapon page after TGP AUTO PRE Mode handoff (crosshairs need to be manually collapsed), all Mavs missed the target by over 50 meters. This is after installing todays update 2.5.6.57264 https://drive.google.com/drive/folde...Fp?usp=sharing

Simplest answer to this is to move the SRS radio sound to a single ear. That way you can tell which radio the comms are on

Pressing CZ will bring the TGP back to the current Steerpoint.

Providing you are wanting to utilize a VHF freq, Comm2 works fine.

I manually add a flight plan every time on our server and rarely have any issues. Have you tested this against a full align to see if it’s just stored align issue on the ground. Once you have entered the SPs, rocker up and down to select first to last and see if that corrects them. F-16 has a phantom SP problem that has been reported.

You can still slew yes, but you can’t boresight

Don’t trust GR and their explanations hahahaha

I’ll just add to 3 as the rest is good gen. LGB are hard set on the ground by a screwdriver and as such, can’t be changed. You are the one in RL that checks in with a JTAC/FAC(A) and tells them as part of your checkin, what codes you have set.

That has been removed as it was an incorrect feature. CZ will slew the TGP to the selected SP

Have you looked at YT videos and written down a guide? You could then produce you’re own as you like then?

Yes use the MAV FOV zoom to endeavor to break out closely spaced targets and see if that works. No max alt I’m aware of, just range

BN. You should be able to ripple 6 x1 to get the area coverage required for certain target layouts. Are you saying this is incorrect, that the spacing needs to be a certain distance to correctly deliver?

One reason could be targets too close together at the point of handoff, hence Mav can’t lock and crosshairs won’t collapse. Try changing Mav WPN page FOV

Seems to be the same issue yes. Thanks BN

This is a bug for sure. MRM should be able to set different settings to standard A-A mode for BVR reattacks

ED Been a month since my post now and no response. Surely a simple question as you know what was modeled for the Viper release??

That :thumbup: Read HAF -34 and it points out different HARM modes

BLUF Regardless of EW lessons, there is no “In Rng” cue in HAS mode, which is all we have at the moment

Shot multiple HARMs at Low Blow today without any trouble in SP

Have you carried out the alignment correctly? And you definitely have NAV mode and not DGFT and all master switches turned on?

RWS will give you the small white boxes and these appear dependent on Range and target size. TWS requires a constant radar paint on the target to continually update the tracking symbol. If radar paint is lost, TWS starts over again

Can’t bore sight, but CZ will reslave to SP after slewing off

There’s a dedicated Bugs area at the top of the Viper forum page mate.

Did you remove unnecessary emitters from the table you were using? We’re you in Wide or CTR FOV?

Beat to do it from the rearm/refuel window