RED

Thanks Heatblur for giving us the answer we wanted to hear!

No advantage seen here on Ryzen. Your CPU will have two boosted cores and DCS will jump between them. No need to do anything manually.

What can you do with the GPS? What features does the CDU have? Looking forward to this. I am enjoying the C101 and this will probably be a lot of fun as well!

Could not find this on the forum. Track will be submitted later.

A good comparison for DCS are e.g. the Cinebench 1T benchmarks. Since DCS runs mainly on only 1 thread, loading the CPU up with many threads and looking at clock speed will not give you much relevant results. Process lasso had no effect in testing on the latest AMD CPUs. Ryzen Master shows you the best cores and DCS will jump between them. You can squeeze a bit of performance if you want to look into the curve optimizer and also tighter timings on your RAM.

@Sr.It seems like the spring was worn out. I changed it to a harder one at it fixed it. The two points that hold the spring seem to be closer together than on the other axis. If there is no tension at the center, it can get mushy.

It is only a problem if you really don't have enough VRAM. 11GB is plenty DCS often takes only 11 out of 16GB for me but e.g. Syria and Tomcat can take more. Nevada:

@kontiuka no, on open beta. I found something that it might be bugged with certain weather presets and is reported. It was working for me in the Hornet but that might have been another preset.

I couldn't find anything on rain drops on the canopy in the forum. Will they be modeled at some point?

Doesnt the 3800XT boost to 4.7 out of the box?

@Wali763That looks pretty solid. Don't worry about the usage. Now you can lean back and have fun

Copy. I tested with an enemy unit/static near the farp with all the farp units still intact. No rearm available.

@Backy 51 Do you know what the limitations are on how close an enemy unit can be to block rearming at e.g. a FARP?

A track would help ED to figure this out. @_Spad_That would be a bug. There should be no slip on the aircraft. Velocity vector might show yaw offset due to wind.

Probably, I haven't checked yet. Will do. The difference of the center positions can be about 3-5 units of the deadzone in DCS. Enough to break out of the autopilot in the Hornet with deadzone at 1 but not noticeable when maneuvering.

Yep, @JayRoc. That helped me as well. Also removed any artifacts I had.

Did you use radar ranging? Ranging through the FLIR is not implemented I think. This could be an error in that the MC doesn't compensate for ISA deviation. Same can be observed for the baro altitude warning.

Hello fellow VKB users! I have a problem with my stick. It started to not center anymore correctly. So when i push the stick left and let go, it goes to a different position than if I do the same from the other side. Back and forth is fine. Anybody with a solution for that? I found something about loose magnets but that might not be it. tagging @fallout9 as well.

You are CPU limited. 8 cores-> DCS uses one thread ->1/8 ~13%. Make sure there is nothing else in the background running. RGB software, anti malware, bloatware etc. Did you overclock your CPU? If you applied a simple multiplier for all cores you likely slowed it down on Ryzen.

but something is off. @minimi66 , you should not need to re apply the settings every time you start the game.

Try a repair/no mods? Has helped some in the past. In FPS VR or similar, check if that is the CPU spiking. Might be another app taking all your cpu cycles there

I get normally around 60 FPS but Guam brings it down to 45 if not 30 when flying very low. No stutters or anything but just a lot less FPS than usual. IMO Nellis can be worse.

That is a liberation mission with some scripts. If you don't have the problems otherwise it is probably a problem with the mission. Recommend to try other mission and check again. DCS has some quirks. E.g. at Nellis the CPU frame time goes up as well but the rest of the map is fine. So if it is generally ok don't try to fix something for that single mission.

@darkman222@dureiken What is your "idle" cpu frame time? What do you get just opening an empty map? Below 10ms with no spikes? Do you have a prebuilt with any software running or any rgb stuff etc in the background?