Schlomo1933

Have u set the trim as center trim in the special tab? Than u have to center after every trim release. if u don’t like it, choose instant trim in the special tab

Flight director always, hover by yourself. Don’t use the hover mode . If u are under attack , u are way to slow to react in hover mode.

No it’s not constantly firing. It’s firing when u lock a target or u fire a vikher . but it stays in standby if switched on and so needs cooled. i never use the reset by my self . Just switching on and off

Sling load was never used in the ka50

It’s Not a Ka-50…..

Use quaggles input injector : https://github.com/Quaggles/dcs-input-command-injector and munkwolfs community bindings: community bindings: https://github.com/Munkwolf/dcs-community-keybinds all needed Keybinds and axes for rotaries are inside. Works like a charm. Not only for the shark. For all modules

You don’t need to turn off the laser. Just wait till the cooldown reaches 0 before u lase the next target. If u need a long time till u will find your next target, Then switch the laser off . but if u have a lot of targets in front of you. Switching the laser off makes no sense . Easy thing : switch the laser on iff you have a target. If not , switch it off.

For me it sounds so, that you have shifted your view to the left?

Intentional. There was a big discussion about it

Ed removed it from BS2 and BS3

On the left where your laser on/off switch is. There is a rotary switch for different aiming modes You need to put in moving cannon mode

Check if you have the gun in fixed mode….

Coordinates are excepted (after you uncage one time the shkval) when the coords are not more visible at the inu-800 But u need to make the fix for the magnetic north first.

U need to change the abris format from „xx*xx‘ xx“ to „xx*xx , xx“ after cold start. Read the the abris coordinates from the abris map. Put the value into the pvi-800. after that u can make the fix…

@Hobel @Flappiethank you for your support

I’m next Thursday back at home, then i will try a your mission and will make a trackfile

Any news when it will be available? Can’t wait

Don’t believe it and this the first time

In the Abris they are correct. But check them in the Inu panel. (On each fixpoint you need also a waypoint) Select 1 , make the fix over it, then check the distance. (Should show 0.0) Select number 2 , make the fix over it, check the distance (Should show 0.0) and so on…. You will notice that the distance will be at Fixpoint 3 and 4 are not correct. They are pointing to a different fixpoint.

In which state is your rocket salvo switch? It’s not affecting unguided rockets only. Also affects the vikhrs. U need to select short salvo. Medium or long will always fire 2 vikhrs and is realistic.

1. Pls Delete all mods. 2. delete “metashader2” and “fxo” folder in your user folder

I just get 40 fps. In Chanel map it falls sometimes at 38 . Then I see slightly stutter if I look to the left or right. but I use a really old i7 6700k

@ Acer : I do the same. I use the rifts . Just oculus app , nothing else. 1.5 pixel density

Delete fxo and metashader2 folder inside user files

Which pixel density are u using ?