gianlu320

Hello Anton Very nice project you have over there.. Can I ask you to explain how you use a Circuit braker to simulate a magnetic held switch? I am trying to do the same for a F16 pit but I don't have any clue on how to do it. Thanks

Tusba adds many axes to your throttle and they are needed if you want to implement something like idle/cut off and AB detents If I remember it correctly the one you have to select is RY I am not at the computer now. Also make sure when you start your flight your throttle is not in the cutoff position. If your throttle is in the cutoff position and you haven’t set it to come off from that position it will not move. A good way to check that is to start inflight. So select axis axis RY and start inflight and see if it moves

I would preorder a f104 any time, even now. If it’s a F104S even better

Good luck guys It’s so nice to have an Italian development team in Dcs

Bellissima notizia. Il 39 e’ magnifico e non vedo l’ora di sapere cos’altro porterete in DCS. In bocca al lupooooo

Your PD is too high, also make sure you dialed the IPD in the pimax correctly. Unfortunately as far as I know the pimax IPD doesn't correspond precisely to your interpupillary one so trial and error is required. Also make sure you have parallel reprojection off, DCS soesn't need it. And Hidden area mask on.

Sorry to revive such a old thread but I feel it is still relevant. I was watching videos of the new sim and I could not avoid noticing how colours there feel more natural, more authentic. I know we shouldn’t compare, but it is just to explain my point. In Dcs colours feel still too vivid, too saturated, even with the new Syria map. Any suggestion on what to adjust in the settings to make it better?

I don’t really understand what this announcement means. Are you talking about going commercial on dcs platform or other platforms like Msfs? Or both? By the way... Who cares about msfs

F104 confirmed!!!!:megalol: Scherzi a parte, il 39 è magnifico. Grazie mille per averlo reso pubblico a tutti

I would have preferred not to use them as well but I couldn't find any other way to match the gates in the real throttle with those in the sim. If you are not interested in the gates you are good just by setting the min and max values. But if you have a phisical guide rail then matching the virtual gates with the real ones it's a must. Anyways I totally agree with what Manuel told you. The first setup and calibration should be done only setting the min and max values. When you have those properly setup you can start adding the cut off point and the rest. It's quite amazing being able to turn on and off the engine like the real one.

@markturner1960 Thanks a lot for the tip. I have read that thread but it's quite complicated. I might have found a better way After reading your previous post I also assigned RY to the throttle axis and it's working very well ! Before reading your post I was using slider1 as throttle axis, and it was working well from idle to just before afterburner were it was all screwed. I have read a bit the manual and even if it is not very clear I was able to figure it out. Basically all the other axes RX RZ etc are used by Tusba for the detents. You basically use RY as axis assigned to throttle in dcs and via tusba software you calibrate Cut off, Idle, Mil and afterburner So now my throttle guide rail gates in the real world match perfectly the gates in the virtual world.

OH sorry about that I didn't realize it was your thread I hope you can find a way to fix the issue you have. Today I installed my Tusba for the first time and it works as intended with the thrustmaster TQS so I don't really know what is causing the issue you have. The issue I have instead is.. I mounted my TQS on a F16 throttle replica arm and I am about to install a throttle guide rail replica as well. But for the moment I am not able to match the movements between the real throttle with the virtual one. The virtual throttle reaches the mil and max afterburner before the real throttle reaches those gates

I have a tusba as well and I am about to connect it to my F16 TQS for the first time. What stopped me till now was many people reporting calibration issues with tusba like yours for example. But now I need to use it to enable the Idle/cutoff detents. Anyway try to read here and see if it helps. https://forums.eagle.ru/showthread.php?t=273095 You seem to have a slightly different problem but may be it comes from the same source

@Talonx1 Thanks a lot for your answer I will try and experiment with that

Where do we find this option? Sorry for the noob question

pimax 5k+ here same, clouds and some shadows rendered in one eye only

@darkman222 This happens to me as well with my pimax 5k+ I watched your video and it's exactly what I sporadically experience. This doesn't always happen to me, I would say once in five times I get it. When it happens I close DCS, I close steam VR and in pitools I click on restart service and then I restart steam VR and DCS This seem to work for me

hello watermanpc I experience the same unfortunately

I would also like and change the colour from green to yellow. hopefully sooner or later it will be possible. I really don't like the green backlighting

@ AMVI_Rider I would like to try VRK I have a surface go pad and I know the current version of your software doesn't support client/server mode anymore. Any chance to have a previous version that supports this mode? I can't find it anywere Thanks a lot

Hello Fab.13 Can you explain where is the option "reinitiate all parameters" I would like to try but I don't find it. Thanks

G91 !! Siete grandi, se raggiunge il livello del 39 sarà una bomba.

Yesterday I also received my viper gear 2.0 icp I haven’t had time to test it yet. But I agree, the build quality is super. @wags thanks a lot, the profile is really appreciated

Will the campaign still work in future versions of dcs world? This is what I would like to know

I have never used Helios before, and I have a question Can we export even single instruments? For example If I have a small lcd screen, can I export only the stby ADI? Thanks a lot for the help