silverdevil

hello. please post your DCS.LOG. it is found in \Saved Games\DCS\Logs. Ciao. Per favore, pubblica il tuo DCS.LOG. Lo trovi in \Saved Games\DCS\Logs. i thought perhaps you are Italian.

you should also share the latest DCS.LOG

i definitely see the longer quit times. not a real issue for me.

of what the system operating temps should be according to the oem. i was just trying to help with my own evidence. no need to act i am stupid. if you were as smart as you think you are, perhaps you should have fixed everyones' problems by now. or at least realized that not every user is having this issue. take care of yourself idling at the red light.

i tried a simple bfm in afghanistan. i have Intel 11th Gen Core i9-11900KF and 3090. the cpu never got above 60 C and gpu never got above 75 C. these numbers are within specs. i will try to see if a well populated mission changes anything.

i did not review your latest crash files. however, yes, the cuda error pertains to nvidia driver. my system does not have any crashing (or ever in fact). i currently am running nvidia 576.02. i see the latest release version is 576.52 (May 19, 2025). maybe that will fix.

hello. i ran your log through the discord analyzer Logfile Analysis DCS Version 2.9.16.10523 (VR) Edition Standalone OS-Version 10.0.19045 ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ CPU AMD Ryzen 5 5600X 6-Core Processor [1x L3 caches] Cores / Threads 6/12 RAM 65461 MB Pagefile 16384 MB Preload Radius 5300 GPU NVIDIA GeForce RTX 3060 Ti VRAM 8024 MB Driver 572.83 VR lighthouse ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Custom Mods Tacview,DCS-SRS Errors Your DCS has crashed The crash occurred inside nvcuda64.dll. Try a !repair., Delete Saved Games\DCS.openbeta\fxo and metashaders2 and try again., Next, delete %LOCALAPPDATA%\TEMP\DCS.openbeta and try again., Next, try renaming Saved Games\DCS.openbeta to DCS.old and try again., Stacktrace (nvcuda64): cuProfilerStop + 0x2449A0 (nvcuda64): cuProfilerStop + 0x33B86A ((module-name not available)): (function-name not available) + 0x0 (dxgi): NVSDK_NGX_VULKAN_Init_ProjectID + 0x143B (nvngx_dlss): NVSDK_NGX_DirectSR_Query + 0x18BBD [...]

the wind direction and speed is configured within the mission. open the mission in mission editor to see. it shows in the mission briefing too.

@Gunfreak have you tried the renaming the DCS folder within Saved Games to .BAK and then try the sim again?

i do not see anything different on my system. i was mentioning the heat because there are other reports of higher temps. this means to me that the cpu is getting more work. this is important because cpu does a lot of work in gameplay. don't get me wrong. gpu is also important (especially vram) but i see this is secondary to cpu.

IMO i think what is happening, especially considering the radio silence from the devs, is intel cpus 13 and 14 gen causes troubles with the p/e core architecture. ED is trying to use more CPU to correct the performance issues, but those changes also elevates the heat. which is normal. higher cpu causes more heat. obviously. users see the added temps on their systems. in my case i have an older cpu before p/e cores. so essentially all p cores. "The Intel Core i9-11900KF has a maximum operating temperature (TJUNCTION) of 100°C. While gaming, temperatures typically range from 80-83°C with an AIO pump at full speed. Idle temperatures are around 48-50°C." 75 C as a point of contention is likely unwarranted. it just means the cpu is running better and it is what we want.

aye. my fans have always spun up when i run dcs. i have an 11th gen intel i9 and a 3090. my first few experiences since patching has been noticeably snappy too. i have headphones. so i do not even here the fans. by the time i close dcs and take off the headphones, the computer is back to normal. i have no baseline to see whether the temps are more than before. sounds like a hardware issue. maybe or dcs is using more of the cpu than it has in the past. i see it as an improvement.

download the bat from here and modify it for your desired version.

nice. i see that now. thanks for the tip.

the patch today released a new version of DLSS.

hello. have a look here. https://developer.nvidia.com/rtx/dlss

good to hear you (seem to) have sorted it. you may also try powered hub. i have had experienced USB issues like this. USB power is not very strong and too long of a cable can cause issues. and guids of devices may change moving them around.

me too. i have changed these settings and see no difference. i also do not have a CPU (11th gen i9) with p/e cores. not sure if there is correlation. the screen shots look okay to me. but yes they seem dim. switching monitors like you did is a good test. are there any settings in the monitor changed? maybe resetting to default may help.

hello. no problem. you new monitor is a GSYNC. i put your log in the analyzer. here are results. Logfile Analysis DCS Version 2.9.15.9599 Edition Standalone OS-Version 10.0.26100 ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ CPU 13th Gen Intel(R) Core(TM) i9-13900F [1x L3 caches] Cores / Threads 24/32 Hyper-V active RAM 65348 MB Pagefile 5888 MB Preload Radius 103300 GPU NVIDIA GeForce RTX 4090 VRAM 24142 MB Driver 576.40 ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Custom Mods UH-60L Press the buttons below for recommendations. Errors The Integrity Check failed Delete all unofficial mods and do a !repair of DCS. Hot plug Events Disable hot plug in your CONTROLS section. Advice If you have stability or performance issues pointing to your GPU, rollback the GPU driver to version 566.36, Verify that this is configured correctly in Windows: Game Mode disabled, Hardware accelerated GPU scheduling disabled, Core Isolation disabled Tuning Tips Disable civil traffic., Enable Full Screen mode., Turn off SSLR., If you have FPS issues, try turning off VSYNC in graphics settings., Tuning tips are recommendations for better FPS based on your CPU, GPU and RAM. They might result in slightly decreased display quality. i have a GSYNC and 3090. try these settings in the nvidia control panel for program settings dcs.exe null see how this works. i think it is VSYNC instead of GSYNC

hello. fix these errors and retry. mods are likely the culprit. discord analyzer output follows: Logfile Analysis DCS Version 2.9.15.9599 Edition Standalone OS-Version 10.0.19045 ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ CPU Intel(R) Core(TM) i7-9700KF CPU @ 3.60GHz [1x L3 caches] Cores / Threads 8/8 RAM 32689 MB Pagefile 32000 MB Preload Radius 59600 GPU AMD Radeon RX 6700 XT VRAM 12243 MB Driver Enabler ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Custom Mods Military Aircraft Mod,DCSViperAudioPack,natoGF,A-4E-C,Tacview,Civil Aircraft Mod,main,Su-27SK Errors Error '=' expected near '-' Line 6 Script C:\Users\Felipe\Saved Games\DCS.openbeta\Mods/tech/main/VPC_RAF... Error unexpected symbol near '=' Line 2 Script /sounds/34/sdef/aircrafts/f-16/cockpit/f110ge129_rpm1_inr.sdef Error unfinished string near '"Effects/Aircrafts/F-16/Afterburner' Line 1 Script /sounds/34/sdef/aircrafts/f-16/afterburner.sdef If the above errors point to DCS internal files, please conduct a !repair. Otherwise remove the respective unofficial mod. Advice Windows 10 will be EOL Oct 14th 2025. Upgrade to Windows 11., Remove the core-affinity mask from your CPU., Verify that this is configured correctly in Windows: Game Mode disabled, Hardware accelerated GPU scheduling disabled Tuning Tips Disable Tacview for performance reasons., Enable Full Screen mode., Turn down Anisotropic Filtering., If you have FPS issues, try turning off VSYNC in graphics settings., Tuning tips are recommendations for better FPS based on your CPU, GPU and RAM. They might result in slightly decreased display quality.

hello and welcome. please post your DCS.LOG file found in SavedGames\DCS\LOGS. it may have some clues. also share your monitor make and model.

hello. sounds like the mouse is going to sleep. when you spend 3 minutes in f10, are you using the mouse constantly? when it happens again, post your DCS log. if the mouse is disconnecting, the log may show it.

i am assuming OBS is OBS studio. anyway i believe you need to run OBS as admin for it to properly interact. maybe this post would shed some light.

hello. you realize that you can copy these missions to your own folder and edit them with the newer AC?

hello did you mess around with HOSTS file in the past. i know there were lots of users that did this to get around some coding errors. look in folder "C:\Windows\System32\drivers\etc" make sure there is nothing uncommented with hash (#). if there is, just comment out the line with hash. my default HOSTS: # Copyright (c) 1993-2009 Microsoft Corp. # # This is a sample HOSTS file used by Microsoft TCP/IP for Windows. # # This file contains the mappings of IP addresses to host names. Each # entry should be kept on an individual line. The IP address should # be placed in the first column followed by the corresponding host name. # The IP address and the host name should be separated by at least one # space. # # Additionally, comments (such as these) may be inserted on individual # lines or following the machine name denoted by a '#' symbol. # # For example: # # 102.54.94.97 rhino.acme.com # source server # 38.25.63.10 x.acme.com # x client host # localhost name resolution is handled within DNS itself. # 127.0.0.1 localhost # ::1 localhost