Search the Community
Showing results for tags 'can not reproduce'.
-
Towards the end of the track, I moved TDC in the sequence of left, right, up, and down. But the cross went left, right, down, and up. This behavior started since the last few patches. It's worth to mention that previously during roll alignment, moving TDC would also make bottom cross swing to the opposite direction, but this behavior was reversed and now it will follow TDC direction, which makes logical sense. So if anyone can try this and clarify a bit, that will be greatly appreciated. JHMCS TDC.trk
-
-
After the update I explained a bug: Waypoint set to 1, WYPT boxed, SEQ1 boxed, and AUTO boxed. After it waypoint number switch automatically to zero! I cant fly to wypt 1 with CPL, because W0 never switch to W1. Also I can't see the route dot lines too! The plane flies a circle pattern around W0. What is wrong?
-
Hello Trying to use Harm in Too mode, cage/uncage doesn't work despite the sensor of interest is setting up into the good DDI ... Anybody with the same problem ? Thanks
-
While carrying out a normal alignment and manually entering steer points, setting bingo etc. I noticed that the whole ICP froze and I could no longer input data or change the display page. this has happened on multiple occasions. In one instance clicking on RTN didn’t show the switch animation. When reviewing the trk file however, the ICP worked normally. this issue only started in the latest OB im curious if anyone else has encountered this bug? If so I will endeavour to get as much data as possible for a bug report. if not, I’ll try and repair my install. thanks
-
Hi Guys, It seems there is an issue with A/P on F/A-18 with BALT mode. Frequently the BALT mode is impossible to engage. When it's the case, we can see on Left MFD "A/P" is appearing, but the plane does not keep altitude. If I cancel A/P with joystick button, A/P disappear from Left MFD. Sometimes, after few attempts, it works, but I noticed that if disengage itself without any axis entry, and the altitude changed slowly... I made a quick flight with the Marianna Island Instant action "Free Flight". The track of this flight is attached. Have you already see that problem ? I didn't see any report concerning this issue. Thank you for your support. FA18-AP-BALT-issue.trk
-
Whenever I cold start up the hornet on the attached mission file, I always get a "left PTS failure" during startup. Sometimes this happens before I even turn on the batteries as shown below in this log: Sometimes it happens after both engines have been spooled up and I'm setting up other things in the cockpit. I attached a track and log file where this occurred. Random failures are turned off. If I create a blank new mission, I can start up the hornet there without any problems. I gave the attached bugged mission file to someone else, and he ran into the same issue as well. Is there anyway to "fix" my current mission file? I'd really rather not have to recreate everything from scratch, especially without knowing what's broken here in the first place. Syria_Training.miz Hornet_Left_PTS_Failure_Late.trk Hornet_LeftPTS_Late_Log.log
-
can not reproduce electrical power switch issue
KL0083 posted a topic in Controller Questions and Bugs
The 2.7 brings back all the same old problem which been previously cured on the last version! wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww -
Hi, I was experiancing a strage thing today. Most of my GBU-38 started to drop far away from target. After some total fails, I started recording a video. The effect I observed: The bombs started to lift right after drop. doing this, they lose most of their speed and then simply drops down to earth like stones. My very first ones (which i unfortunately did not capture in video) the failed hardly, as I droped them only few seconds after being in range. They were then arround a quater of a mile away from target. The Video: At (00:45) I drop two bombs. The second hits quite OK, the first bomb shows the effect very good. I can also share track, but it was neer end of long session. File has 211 MB.
-
This is a strange on....... I got a new SSD yesterday and downloaded DCS world (stable) loaded game and started the process of re-mapping all controls. all is good until I get to the hornet, IT'S NOT there. it is in aircraft list on my mission, when I select it it doesn't load. OK so I go look in root folder for MODS< AIRCRAFT< FA\18 is'nt there either? everything else is fine just the hornet is missing.
-
As the title same, load into any mission and the aircraft is stuck in air 2 air mode. hitting the A2A or A2G button doesn't go back to nav mode etc
-
The mark-point is not created in the place indicated by the radar, it is created with a very large error, it is very clearly visible on the track. FCR MARK EROR.trk
-
Hello all, Until recently I could find TOOs for JDAMs using the radar, placing the cursor on top of a target, and then designating the target. The coordinates generated and sent to the JDAM were spot on and I enjoyed a high hit probability. However, when I tried the same procedure yesterday, after being away from DCS for a couple of weeks, I found that after designating the target with the radar, the coordinates previously generated when placing the cursor on the target are replaced by a new set, which is quite a bit off. Is this new behaviour intended or am I missing something else? Best regards, Cepheus Designating Ground Target Track Changes TOO Coordinates.trk
-
Recently i am flying the f16 and i am often experiencing this: enemy bandits sometimes are disappearing completenly from datalink and fcr, after 20/30/40 seconds they reappear. Is thiss already investigated? or am i doing something wrong? I noticed this playing liberate campaing and some other few missions. Just to know if i have to hunt for a decent track or not.
-
Hi all, It seems that after you restart the hornet and you have a Aim-9 (any variant) onboard the seeker is active and you got the buzzing tone. Have to enable A/A button and then disable A/A to get rid of the noise. I have carried out DCS long repair and noise still occurs. I have included a track file. Regards, John. hornet sidewinder noise.trk
-
Happens about 50 percent of the time. I can have the guy right in front of me and go to lock and i can't uncage my missile. Anyone else having this issue?
-
Since the latest OB I'm consistently getting an error when using the autostart "cheat" The right engine spools up, all seems well, and then I get "Right engine parameters failure" and that's it. I've tried it numerous times with the same error. Is anyone else experiencing this? I have some mods installed, but only graphical.
-
just tried several times, spawning on CVN (SC) deck, using either keyboard NWS or mapped HOTAS button. When attempting to switch to NWS High to begin taxiing to the catapult, "NWS" on the HUD disappears, and ceases steering on deck. No amount of hitting the controls for this function seems to return it to working, and neither does spreading/folding the wings... Track file included. NWS-Disappears - Copy.trk
-
Recently I updated my gpu from an RX 480 to a 6800XT, however I noticed that after that I started getting flickering on the doppler radar after designating a point of interest. This happens for me no matter what mission I use the Hornet on. I made a short video of it here using the instant action weapon practice on the Caucus map. The mods I have installed are the Civilian Aircraft Mod, F-22, Tacview, and DCS SRS. Is this a known issue or is there a way to solve it? I have dumped my fxo and metashaders2 folder as well as doing a fresh install of the gpu driver after I installed the card. DxDiag.txt
-
Stuck at full right.