Introducing the VPC MongoosT-50

[Karon]

No issues here as well; don't use any wrench mate.

[Barefoot Bandit]

I've had no issues, and I can get quite vigorous when playing Elite... Certainly no need for a wrench...

 

Z...

[TAW_Blaze]

Allright, thanks :)

[dburne]

I received my replacement flip down trigger today from Virpil, had it installed in moments.

Once again, excellent support and communication from these guys.

I will be sure going forward, to try and have a gently touch when in the heat of battle lol.

[some1]

Nice. Which extension length do you have on those shots?

[Greekbull]

Nice. Which extension length do you have on those shots?

 

Were you asking me? If so I think it's a 75cm Sahaj extension. Not positive on the length. If you'd like I can measure tomorrow.

[some1]

Yeah, looks like this from the photos, I was just curious as I plan to order the stick myself next month and I already have the extension. :)

[dburne]

Were you asking me? If so I think it's a 75cm Sahaj extension. Not positive on the length. If you'd like I can measure tomorrow.

 

I am guessing you probably mean 75mm?

 

75cm would be mighty long.

[Greekbull]

Oops yeah it was pretty late when I posted that. 75 or 100mm is what i have...

[mr_mojo97]

Hey all, I’m thinking about buying the T-50 base but need the base plate for their table mount that I already use with the TM Warthog but it doesn’t appear to be on their website or Amazon. Any ideas? Ta

[Gman109]

Hey all, I’m thinking about buying the T-50 base but need the base plate for their table mount that I already use with the TM Warthog but it doesn’t appear to be on their website or Amazon. Any ideas? Ta

Do you mean a plate in order to use it on a desktop? Sorry Mojo, doesn't exist anymore. One of their older pics out there (it's gone now thanks to me bringing it up, haha), they showed an early T50 base variant that was on a desktop plate. It was apparently just a prototype, and they decided - rightfully so - that the T50 base + stick is just too high to use as a desktop unit. And it is. So, it's either mount it in a custom cockpit, or use their desk clamp drop mounts. For now. There is a new base, called the WarBrd coming out, which will use the T50 stick and a much shorter/lower base, designed to be a desktop unit. You'll have to wait for that if you want to use a T50 stick on your desktop, that or grow to be about 8 feet tall for the current unit, either will work...

 

 

Heh, found a link in Google to the old desktop plate for the T50 - again they don't make this, as it turned out to be way too high for desktop use (I tried with mine on my desktop, it IS way too high to be used IMO). Third picture down. Again, the WarBrd will be out very shortly, just wait for that, and run that on desktop, that's what I'm going to do. Pic of WarBrd below as well. The WarBrd base looks about 1/2 the height of the current Mongoose T50 unit, which will = good times for desktop use.

 

 

 

 

 

 

 

https://www.google.com/url?sa=i&source=images&cd=&cad=rja&uact=8&ved=2ahUKEwjD1YL_4PnaAhVl8IMKHUbZDrIQjRx6BAgBEAU&url=https%3A%2F%2Fforums.eagle.ru%2Fshowthread.php%3Ft%3D180448&psig=AOvVaw0zh3_3aTMkMf4rp6EBN2vY&ust=1525994053906307

 

 

https://virpil-controls.by/images/stories/virtuemart/product/delta_FS.png

Edited May 9, 2018 by Gman109

[sze5003]

Hey all, I’m thinking about buying the T-50 base but need the base plate for their table mount that I already use with the TM Warthog but it doesn’t appear to be on their website or Amazon. Any ideas? Ta

I pre-ordered a warbrd base and t 50 grip. I initially had the same question months ago but seems that was just a prototype. This is your best option right now if your desk is not suitable for mounting.

[Sokol1_br]

Hey all, I’m thinking about buying the T-50 base but need the base plate for their table mount that I already use with the TM Warthog but it doesn’t appear to be on their website or Amazon. Any ideas? Ta

 

If what you call "table mount" is VPC Desk Mount:

 

https://virpil-controls.by/images/stories/virtuemart/product/MT-50_Bracket_01.jpg

 

For attach T50 base in Desk Mount is used the horizontal 'U' piece in back of base, see in this picture:

 

https://virpil-controls.by/images/stories/virtuemart/product/%5E9D663412F7CB22B922E8E5910E3391DED257334D071571A0C0%5Epimgpsh_fullsize_distr.jpg

 

T50 base don't need base plate like Warthog, since T50 definitively is not an 'desktop' joystick.

[mr_mojo97]

Ok, thanks everyone.

 

Sokol, you nailed it. Thanks for the pics - makes sense now. This is my set up

[Karon]

I've finally took a couple pics of my base and the solution I ended up with.

 

In DCS I'm a rotor-head hence stick movements are usually smooth and limited so I haven't noticed the issues until I started flying fixed wings, especially WW2 in both DCS and Il2.

 

What happens is: when i hard turn in any direction (happens on the vertical axis as well but it's limited), I have strong vibrations and the feeling on the grip is the same you have on the steering wheel when driving on cobblestone. This doesn't happen when pulling or turning lightly.

I noticed that, during hard pulls, the ball bearing moves from its normal position and I suspect it’s subject to some sort of torque effect, perpendicular to the mast it is mounted on; hence I have massive vibrations on the grip.

The washer prevents this movement and the feeling is much, much better to the point that I forgot about this issue at all for weeks. It is not perfect thought because the bearing can still move a few tenths/mm hence on hard turns you can still feel something, although even lesser than the effect on the vertical axis (I have applied no washer there). I wouldn't bother on a heli, but it's an annoying feeling when dogfighting (and the F/A-18 is close!).

 

 

My guess is the cams are not perfect: the additional I have received are well polished and black, the one mounted on the base are not. The latter' surface it's probably not perfectly even, probably slightly sloping, this causes the ball bearings to "slip aside" and induces vibrations.

Has anyone else have or had similar issues?

I'm dropping an email to support as well. I already dealt with them when one of my sensors stopped working and they've been amazing.

 

 

Issues aside, has anyone tried the cosmos cams with rotary wings? The sound great although not available ATM. I’m looking for feedbacks before buying them.

Finally, -8 days until the Throttle becomes available. Can't wait to try mine!

[98abaile]

My guess is the cams are not perfect: the additional I have received are well polished and black, the one mounted on the base are not. The latter' surface it's probably not perfectly even, probably slightly sloping, this causes the ball bearings to "slip aside" and induces vibrations.

Has anyone else have or had similar issues?

I noticed this on the original cams at release, although I didn't check on the replacements I got.

[Etirion]

I dont get any vibrations, its probably the cams.

[NeilWillis]

Delighted with my stick. Quick delivery too, so thanks Virpil for a great product, prompt response to enquiries too.

[dburne]

I have a little roughness on my installed cams, but don't even notice it while flying. They sent me replacements that look good, but not keen on trying to replace them at this time since it does not affect my flying.

[98abaile]

One thing I did notice early on and solved very easily was the springs would creak as the moved within their housing during deflection and you could feel it through the stick. The problem was solved easily by smothering them with big gobs of thick grease (I used the molycoat I used to use on my warthog).

[Cyph3r]

► Pre-Order Products Update

 

We would like to quickly update the status of our current line of pre-order products:

• VPC MongoosT-50 Throttle
  
• VPC WarBRD Base
  
• VPC Constellation Delta Grip
  

 

Production of our new devices is still moving forward as planned, however, we must unfortunately announce a short delay to the estimated release date.

 

This is due to the percentage of the team’s available manpower than has been put into launching and preparing our new production factory, training new staff, the launch and maintenance of our new webstores and payment gateways as well as maintaining our high standards of continued support for existing and new customers.

 

The new availability date will be pushed back by two weeks to 4th June 2018.

 

We deeply apologise for this delay - we will continue to post status updates of the pre-orders to keep everyone in the loop!

 

Of course, if you have any questions or problems regarding this announcement, please contact support@virpil.com.

 

Thank you for your continued support!

VIRPIL Controls Team

[Mr_sukebe]

Cypher>

Thanks for advising.

[sze5003]

Since I pre ordered a wardbrd base and t50 grip I was wondering, will they be shipped together hopefully?

 

Thanks for the status update. I guess we can assume preorder should start shipping June 4th?

[Cyph3r]

Since I pre ordered a wardbrd base and t50 grip I was wondering, will they be shipped together hopefully?

 

Thanks for the status update. I guess we can assume preorder should start shipping June 4th?

 

Yep! Everything will be shipped together. If you would prefer to have readily available items shipped ahead of pre-orders just send a message to support@virpil.com and I can get that organised for you :)

[sze5003]

Yep! Everything will be shipped together. If you would prefer to have readily available items shipped ahead of pre-orders just send a message to support@virpil.com and I can get that organised for you :)

I will just wait have them shipped together then. Thanks for the quick reply!