Sprite001 Posted January 30, 2018 Share Posted January 30, 2018 My update worked perfectly! I had all 3 versions installed: 1.5.8beta 1.5.8stable 2.2alfa I've now updated 1.5.8beta to 2.5beta and let 2.2alfa be removed. Since this merges 1.5beta and 2.2alfa, adds some and replaces a few files and gets rid of duplicates... It basically turns out to use up about 35GB less disk space than before. My 2.5beta is now using 99GB in total. I have the following modules installed: FC3, Mig-21, Mig-15, Mi-8, BS2, Huey, F-5E, Spit, Mustang, Nevada, Normandy and pretty much all Campaigns for these modules. Keep in mind that it downloads first and then unpacks the files, so temporarily you would need some more space. I did not sit there and watch the thing but I would recon you need at least 20GB of free space. Don't quote me on the numbers, I cannot exactly remember how much free disk space I had before. I have 27GB left when download is complete..:unsure: Link to comment Share on other sites More sharing options...
Art-J Posted January 30, 2018 Share Posted January 30, 2018 Did you change the registry key to match the new drive you put it on? If not, the installer wouldn't know where to copy files from. I sure did, and I suppose Dburne did as well. But even then the updater seems to be struggling with correct detection of installs on separate physical drives. We're not the only guys with this issue. Oh well, if nothing goes wrong, only a few hours left :D. i7 9700K @ stock speed, single GTX1070, 32 gigs of RAM, TH Warthog, MFG Crosswind, Win10. Link to comment Share on other sites More sharing options...
_schepper_ Posted January 30, 2018 Share Posted January 30, 2018 Aaaahhhh afther 4.5hours finished downloading.....installing... pc crash when installing.... now its like, the updater is looking at the downloud files at like 13kb/s at 96% :( ---------------------------------------------------------- i7 2600K oc 4.7g / asus gtx 1080 gaming x+ / 16gig ram / ssd 500gig / oculus rift / jetseat se / saitek rudder ((next upgrade)mfg crosswind) / logitech warthog hotas + 20cm extention Link to comment Share on other sites More sharing options...
Gazza.Blake Posted January 30, 2018 Share Posted January 30, 2018 Hmmm, Started downloading the update, got about a third of the way then my computer had a moment and rebooted, now it wont continue updating even using the updater program in the bin folder ? Intel® i9 9900K Coffee Lake OC 5.1GHz, ASUS ROG Maximum Formula LGA1151 MB, Windows 10® 64bit Pro, 64GB 3200MHz DDR4 RAM, EVGA Black Edition 2080Ti OC GPU, 2 x Samsung Evo 970 NVMe 1TB Drives, 1 x Samsung Evo 860 2TB SSD, 1 x Seagate 2TB HDD, 1 x Acer™ Predator 35" 4K Wide Flat Monitor, TM Warthog HOTAS, MFG Crosswind pedals, Oculus Rift S Link to comment Share on other sites More sharing options...
Steel Jaw Posted January 30, 2018 Share Posted January 30, 2018 It better be worth it. :D How can it not be? "You see, IronHand is my thing" My specs: W10 Pro, I5/11600K o/c to 4800 @1.32v, 64 GB 3200 XML RAM, ASUS RTX3060ti/8GB. Link to comment Share on other sites More sharing options...
FOXFIRE TWOONE Posted January 30, 2018 Share Posted January 30, 2018 I have done the update 1.5.8 to 2.5 beta move 2.2 too 2.5 according to updater. Asked if I wand to remove 2.2 alpha, yes. So now where do I fine the nevada map? Intel core I9 10900K 3.7 ghz Asrock Z490 Extreme4 G-SKill Ripjaws V 32GB Cooler Master 120m GTX 980 Superclocked Corsair AX850w psu Samsung 1 T M.2 2 X 850 ssd's Sony 48 in HD TV Trackir 5 Hotas Warthog F/A-18C Hornet Grip Logitech Pro Peddles Windows 10 64 Link to comment Share on other sites More sharing options...
grunf Posted January 30, 2018 Share Posted January 30, 2018 I have done the update 1.5.8 to 2.5 beta move 2.2 too 2.5 according to updater. Asked if I wand to remove 2.2 alpha, yes. So now where do I fine the nevada map? It should be in your 2.5 install. Link to comment Share on other sites More sharing options...
FOXFIRE TWOONE Posted January 30, 2018 Share Posted January 30, 2018 It should be in your 2.5 install. I see it in instant action, but how to I chose it out right. Intel core I9 10900K 3.7 ghz Asrock Z490 Extreme4 G-SKill Ripjaws V 32GB Cooler Master 120m GTX 980 Superclocked Corsair AX850w psu Samsung 1 T M.2 2 X 850 ssd's Sony 48 in HD TV Trackir 5 Hotas Warthog F/A-18C Hornet Grip Logitech Pro Peddles Windows 10 64 Link to comment Share on other sites More sharing options...
ShadowVonChadwick Posted January 30, 2018 Share Posted January 30, 2018 OCing to 4.7 can be problematic. RyZen5 3600x, MSI GamingX RX 5700xt, AX-370-K7, 16 Gig G-Skil 3200 :thumbup:, Antec 650w (Still),Win10 on 256G 870 NVMe, 860+850 Evo for Apps, 2x1TB WD HDs for :music_whistling:, TR5 :detective:, Hog stick:joystick:, 3x TM MFD Bezels. a 32" AOC, @ 2560x1440, no floppy & a crappy chair :pain:. Its hard to find a chair that accepts you as you grow.:pilotfly: Link to comment Share on other sites More sharing options...
jimblue74 Posted January 30, 2018 Share Posted January 30, 2018 I have both 1.5 and 2.0 (nevada). But I have just formatted the pc. How can i install 2.5 OB? Maybe, I must install 1.5 then update to 2.5? Or i must install 2.0 then update? I'm confused. Link to comment Share on other sites More sharing options...
grunf Posted January 30, 2018 Share Posted January 30, 2018 I see it in instant action, but how to I chose it out right. You mean in mission editor? Start new mission (from file menu) and you'll be able to chose from available maps. Link to comment Share on other sites More sharing options...
sze5003 Posted January 30, 2018 Share Posted January 30, 2018 I sure did, and I suppose Dburne did as well. But even then the updater seems to be struggling with correct detection of installs on separate physical drives. We're not the only guys with this issue. Oh well, if nothing goes wrong, only a few hours left :D.I may be in the same boat but I guess we will find out when I get home. I moved both 1.5.8 and 2.2 to a new drive and changed the registry for 1.5 and created a key for 2.2 because one was not in my registry. As long as I still have my saved games which I backed up I won't care if 2.2 needs redownloaded. Asus ROG Strix Z790-E | Core i9 13900K-NZXT Kraken X73 AIO | 32GB DDR5 G Skill Neo 6600mhz | 2TB Sk Hynix P41 Platinum nvme |1TB Evo 970 Plus nvme | OCZ Trion 150 960GB | 256GB Samsung 830 | 1TB Samsung 850 EVO | Gigabyte OC 4090 | Phanteks P600S | 1000W MSI MPG A1000G | LG C2 42 Evo 3840x2160 @ 120hz Link to comment Share on other sites More sharing options...
grunf Posted January 30, 2018 Share Posted January 30, 2018 I may be in the same boat but I guess we will find out when I get home. I moved both 1.5.8 and 2.2 to a new drive and changed the registry for 1.5 and created a key for 2.2 because one was not in my registry. As long as I still have my saved games which I backed up I won't care if 2.2 needs redownloaded. I had to download everything too, even though I had corect registry entries. After it finished, the installer said the 2.2 was succesfuly removed, but it was not, it's still there. Link to comment Share on other sites More sharing options...
_schepper_ Posted January 30, 2018 Share Posted January 30, 2018 Is this normal? I am watching this screen like 10min now... ---------------------------------------------------------- i7 2600K oc 4.7g / asus gtx 1080 gaming x+ / 16gig ram / ssd 500gig / oculus rift / jetseat se / saitek rudder ((next upgrade)mfg crosswind) / logitech warthog hotas + 20cm extention Link to comment Share on other sites More sharing options...
FOXFIRE TWOONE Posted January 30, 2018 Share Posted January 30, 2018 You mean in mission editor? Start new mission (from file menu) and you'll be able to chose from available maps. Ok I see it now. The letter of the two map are so small I did not see them. I guess me being a little in a hurry didn't help. Thanks Intel core I9 10900K 3.7 ghz Asrock Z490 Extreme4 G-SKill Ripjaws V 32GB Cooler Master 120m GTX 980 Superclocked Corsair AX850w psu Samsung 1 T M.2 2 X 850 ssd's Sony 48 in HD TV Trackir 5 Hotas Warthog F/A-18C Hornet Grip Logitech Pro Peddles Windows 10 64 Link to comment Share on other sites More sharing options...
Maxximillian GER Posted January 30, 2018 Share Posted January 30, 2018 Gentlemen, here is some explanations how your current 1.5 (and/or 2.2) will be converted to 2.5, please take a look the attached diagram. Transition will be made in 2 stages: Stage 1: 2.5.0 Open Beta. The 1.5.8 Open Beta will be updated to the 2.5.0 Open Beta. The updater will check for 2.2.0 (Open Alpha) and add necessary modules from 2.2.0 to 2.5.0 to avoid unnecessary downloads. The 2.2.0 Open Alpha and 1.5.8 Release will remain at this stage so you can continue to play online with those still using 1.5.8 or 1.2.2. Over the next one to two weeks, we will be carefully monitoring 2.5.0 Open Beta reports in order to move to Stage 2. Stage 2: 2.5.0 Release. The 1.5.8 Release version will be updated to the 2.5.0 Release version. You will be prompted before updating to 2.5.0, and you will have an option to save a 1.5.8 Final version to a separate directory. The 2.2.0 Open Alpha will no longer be supported. The 2.2.0 Open Alpha will be updated to the 2.5.0 Release version. Modules from 2.2.0 Open Alpha (or 2.5.0 Open Beta - see Stage 1) will be used during the 2.5.0 Release installation, after which, version 2.2.0 will be uninstalled after prompting you. The 2.2.0 Open Alpha will no longer be supported. If you only have the 2.2.0 Open Alpha, the updater will suggest that you download the 2.5.0 installer - it will then install the 2.5.0 Release version and remove the 2.2.0 Open Alpha. Home Folders (Saved Games\DCS) will remain in the same location (Saved Games\DCS and Saved Games\DCS.openbeta). New Saved Games\DCS.release_1_5 will be created for the 1.5.8 Final version and all its content will be copied into it from Saved Games\DCS. We also strongly suggest that you remove the Saved Games\DCS\Config\options.lua file and set up your graphics settings from scratch, given the significant differences between 1.5.8 and 2.5.0. Old Caucasus will be updated to new one automatically. Activations. All activation keys are saved in the Windows Registry and NO additional activation will be required. 1.5.8 Final version installer will be available on DCS site. Transition planned in January 2018. It's a shame she was released Win 7 64-Bit | I7-3770 @ 3,70 GHz | 16GB DDR3 1600 MHz | GeForce GTX 970 4GB Gaming MSI | TM HOTAS Warthog | PRO Rudder Pedals | TrackiR Link to comment Share on other sites More sharing options...
dburne Posted January 30, 2018 Share Posted January 30, 2018 (edited) Finally, I have it. Fell asleep in recliner came back in here and it was done. Won't be able to get time in it till tomorrow though. My install came in at 96.3 GB. Edited January 30, 2018 by dburne Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero| Link to comment Share on other sites More sharing options...
boedha68 Posted January 30, 2018 Share Posted January 30, 2018 Finally, I have it. Fell asleep in recliner came back in here and it was done. Won't be able to get time in it till tomorrow though. My install came in at 96.3 GB. Wow, I aint ready yet, but i hope in 30 minutes. :thumbup::D sleep well New system:I9-9900KS, Kingston 128 GB DDR4 3200Mhz, MSI RTX 4090, Corsair H150 Pro RGB, 2xSamsung 970 EVO 2Tb, 2xsamsung 970 EVO 1 TB, Scandisk m2 500 MB, 2 x Crucial 1 Tb, T16000M HOTAS, HP Reverb Professional 2, Corsair 750 Watt. Old system:I7-4770K(OC 4.5Ghz), Kingston 24 GB DDR3 1600 Mhz,MSI RTX 2080(OC 2070 Mhz), 2 * 500 GB SSD, 3,5 TB HDD, 55' Samsung 3d tv, Trackir 5, Logitech HD Cam, T16000M HOTAS. All DCS modules, maps and campaigns:pilotfly: Link to comment Share on other sites More sharing options...
TaFnIz Posted January 30, 2018 Share Posted January 30, 2018 (edited) For all who have issues with the file copy from 2.2. Close your download and just manually copy the terrain folders from \DCS World 2 OpenAlpha\mods\terrains\nevada and \normandy to \DCS World\mods\terrains\. Be sure you have both \nevada and \normandy in your \terrains folder. After that, use Windows Explorer, Navigate to the Main DCS Folder, Hold Down Left Shift, and Right Click on the /Bin Folder and Choose Open Command Prompt Here). and type in the Command Prompt Window: "DCS_Updater.exe update" and Press Enter. If done correctly, you only have about 22 GB to download. At least it seems to work for me. Instead of 49 GB i only need 22 GB. Edited January 30, 2018 by TaFnIz Link to comment Share on other sites More sharing options...
dburne Posted January 30, 2018 Share Posted January 30, 2018 I did get a chance to launch 2.5 at least, all looks well with my install. Really looking forward to tomorrow to get my VR settings adjusted and some time in with it over the new Caucasus. Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero| Link to comment Share on other sites More sharing options...
Greekbull Posted January 30, 2018 Share Posted January 30, 2018 So I'm wondering if I should switch to Http? Any thoughts. I have 500mb/s download speed at the house and I'm only 25% done 4 hours in currently around 100kb/s down doing the torrenting. This is pretty crazy at this rate it will be over 24 hours.. I'm uploading 300kb/s so definitely getting hosed on that deal. Any suggestions? Would http get me there quicker? AMD Ryzen 9 7950X3D | ASUS Crosshair Hero X670E | 64GB G Skill Trident Z DDR5 6000 | Nvidia RTX 4090 FE| Samsung EVO Plus 6 TB M.2 PCIe SSDs | TM Hornet Stick/WinWing Hornet Throttle and MIP | VPC T-50 Stick Base | TM TPR Rudder Pedals W/Damper | Varjo Aero/Pimax Crystal VFA-25 Fist of the Fleet Carrier Strike Group One(CSG-1) Discord Link to comment Share on other sites More sharing options...
dburne Posted January 30, 2018 Share Posted January 30, 2018 So I'm wondering if I should switch to Http? Any thoughts. I have 500mb/s download speed at the house and I'm only 25% done 4 hours in currently around 100kb/s down doing the torrenting. This is pretty crazy at this rate it will be over 24 hours.. I'm uploading 300kb/s so definitely getting hosed on that deal. Any suggestions? Would http get me there quicker? Hard to say, it would be a gamble. Plus pretty sure if you choose to switch it starts all over from the beginning. Don B EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero| Link to comment Share on other sites More sharing options...
Greekbull Posted January 30, 2018 Share Posted January 30, 2018 Hard to say, it would be a gamble. Plus pretty sure if you choose to switch it starts all over from the beginning. Yeah that's what I was thinking too...Might not be any better probably just going to have to let it run it's course... for the next 2 days:lol: JK AMD Ryzen 9 7950X3D | ASUS Crosshair Hero X670E | 64GB G Skill Trident Z DDR5 6000 | Nvidia RTX 4090 FE| Samsung EVO Plus 6 TB M.2 PCIe SSDs | TM Hornet Stick/WinWing Hornet Throttle and MIP | VPC T-50 Stick Base | TM TPR Rudder Pedals W/Damper | Varjo Aero/Pimax Crystal VFA-25 Fist of the Fleet Carrier Strike Group One(CSG-1) Discord Link to comment Share on other sites More sharing options...
sze5003 Posted January 30, 2018 Share Posted January 30, 2018 Hard to say, it would be a gamble. Plus pretty sure if you choose to switch it starts all over from the beginning.Never tried http but if source files are the same I don't imagine it would start over. Asus ROG Strix Z790-E | Core i9 13900K-NZXT Kraken X73 AIO | 32GB DDR5 G Skill Neo 6600mhz | 2TB Sk Hynix P41 Platinum nvme |1TB Evo 970 Plus nvme | OCZ Trion 150 960GB | 256GB Samsung 830 | 1TB Samsung 850 EVO | Gigabyte OC 4090 | Phanteks P600S | 1000W MSI MPG A1000G | LG C2 42 Evo 3840x2160 @ 120hz Link to comment Share on other sites More sharing options...
Greekbull Posted January 30, 2018 Share Posted January 30, 2018 Never tried http but if source files are the same I don't imagine it would start over. I did http once before and I believe it did start over at the time. But that time it wasn't faster. I just kind of threw myself to the back of the line if I remember right...but that was a while ago. I believe when 2.0 dropped... AMD Ryzen 9 7950X3D | ASUS Crosshair Hero X670E | 64GB G Skill Trident Z DDR5 6000 | Nvidia RTX 4090 FE| Samsung EVO Plus 6 TB M.2 PCIe SSDs | TM Hornet Stick/WinWing Hornet Throttle and MIP | VPC T-50 Stick Base | TM TPR Rudder Pedals W/Damper | Varjo Aero/Pimax Crystal VFA-25 Fist of the Fleet Carrier Strike Group One(CSG-1) Discord Link to comment Share on other sites More sharing options...
Recommended Posts