Windows Mixed Reality Discussion

[backspace340]

I'm interested in the new hp headset but I'm curious what type of card you will need to use it. I don't think the 1080ti will cut it.

 

Will quote myself from another thread - I think you'll be fine with a 1080ti:

 

You won't even necessarily need to do that, I used to run my Odyssey at 1.5PD on a 1080ti (1440x1440 multiplied by 1.5 = 2160x2160), and that was perfectly playable (45+FPS). I've since backed off to 1.4 so I can add x2 MSAA, but I'm expecting to be able to run the Reverb on my 1080ti at 1.0PD possibly with x2 MSAA as well but I'll have to see. If you have a 2080ti you can probably even add some extra PD.

[BIGNEWY]

Anyone ever get slight pauses or black screen using WMR and DCS?

 

Sometimes when triggers happen or messages play I get a slight pause using my DELL visor. Power management is off for USB and headset and I am using direct mode for headset in steamVR.

 

any ideas?

[Jyge]

Click the Save and close red button. This should save a Samsung-Odysseyxxxx.lua file in your config directory. The existence of that file prevents the window from popping up again. Do I understand you correctly that still comes back?

 

 

https://pasteboard.co/I6CZFAQH.jpg

 

 

No save nor close red buttons here...

[DutchCoolHand]

https://pasteboard.co/I6CZFAQH.jpg

 

 

No save nor close red buttons here...

 

I see that, did you find the file I referenced? I cant check the directory as I am doing an install at the moment to my new M.2 SSD. I would post this in the bug section.

[Jyge]

I see that, did you find the file I referenced? I cant check the directory as I am doing an install at the moment to my new M.2 SSD. I would post this in the bug section.

 

 

No I have no Samsung_something_.lua in Config directories neither under the Saved Games nor in the game installation folder...

[DutchCoolHand]

No I have no Samsung_something_.lua in Config directories neither under the Saved Games nor in the game installation folder...

 

So that is why you keep getting the window. I dont know hpw to change it. but I can send you my fie. It is in the DCS .openbeta directory under Saved Games. Take note of the values that work for you and copy them into the file attached as it currently has my values. Lets see if this works.

Samsung Windows Mixed Reality 800ZBA.lua

[DCSHeliflieger]

Is it possible to make this file visible again as a re-adjustment table with sliders?

[DCSHeliflieger]

supplement

Late self-knowledge: By deleting the lua file. Then, when you start VR DCS again appears the tabular setting area!

[Tronorail]

I don’t know if this is typical or not and would appreciate it if other WMR users can weigh in on this.

 

When looking down to the left or right side areas of the cockpits (oxygen switches on Tomcat, for instance), my view will offset a little bit until I look up. When I do, my view resets back to normal.

 

I can’t figure out if this is unique to me.

[sze5003]

I don’t know if this is typical or not and would appreciate it if other WMR users can weigh in on this.

 

When looking down to the left or right side areas of the cockpits (oxygen switches on Tomcat, for instance), my view will offset a little bit until I look up. When I do, my view resets back to normal.

 

I can’t figure out if this is unique to me.

Nope happens to me too. Sometimes I have to run setup and a choose seated mode and hit recenter in wmr app. Other times I think it may be related to the amount of light in your room.

[Tronorail]

Nope happens to me too. Sometimes I have to run setup and a choose seated mode and hit recenter in wmr app. Other times I think it may be related to the amount of light in your room.

 

I’ve been thinking about putting some LED strips under my desk to possibly aid in this. Now that I know it’s not just me, I may try it.

[DutchCoolHand]

I don’t know if this is typical or not and would appreciate it if other WMR users can weigh in on this.

 

When looking down to the left or right side areas of the cockpits (oxygen switches on Tomcat, for instance), my view will offset a little bit until I look up. When I do, my view resets back to normal.

 

I can’t figure out if this is unique to me.

 

Yes same here, if it does not recenter correctly I use my recenter VR I have mapped and I am good again.

[VTB_Ray]

Does anyone know if the tweak to get MotionReprojection / Motion smoothing to work is still valid?

 

I was trying to help a buddy out last night with his O+ and we couldn't find a MixedRealityVRDriver folder anywhere on his system - so we were unable to locate the file to modify.

 

Is it on by default now in the latest version of SteamVR and is there any way to verify it's working? He opted into the beta for WMR and SteamVR.

[sze5003]

I think it's a setting in steam VR settings now. Enable motion reprojection in the video tab of steam VR. I didn't have have to do anything different and I noticed my fps stays around 45 or so most times. I don't use steam VR beta or wmr beta.

Edited March 27, 2019 by sze5003

[aleksandr55]

Hi guys ! Ordered a virtual reality helmet Samsung Odyssey +. I have +1.5 points for working on a computer and flying to the DCS. Who has a Samsung Odyssey +, please help me. Have questions: 1). You can wear this Samsung Odyssey + helmet with glasses; 2). Who ordered additional lenses for Samsung Odyssey + in this company: https://vr-lens-lab.com/product/vr-frames-virtual-reality-glasses/? Your rating of these points? Thanks for the good answers. Sincerely, Alexander

[DutchCoolHand]

Hi guys ! Ordered a virtual reality helmet Samsung Odyssey +. I have +1.5 points for working on a computer and flying to the DCS. Who has a Samsung Odyssey +, please help me. Have questions: 1). You can wear this Samsung Odyssey + helmet with glasses; 2). Who ordered additional lenses for Samsung Odyssey + in this company: https://vr-lens-lab.com/product/vr-frames-virtual-reality-glasses/? Your rating of these points? Thanks for the good answers. Sincerely, Alexander

 

Don't wear your glasses they will scratch the lenses. I found out the hard way. I did not order from the VR-Lens-lab as they don't have them for the Odyssey+ I checked. I ordered my prescription lenses here https://widmovr.com/product/odyssey-prescription-lens-adapters/ They work very well. you just put them on top of the lenses in the HMD

[Rosebud47]

I´ve ordered the lenses from VR Lens Lab for the Samsung Odyssey, which perfectly fit too on the Samsung Odyssey+.

The adapter lenses on top of the Odyssey´s regular lenses really came very close to my eyes. So I´ve ordered a new and thicker face cushin form "VR cover" for the Odyssey+ , which gave some space back between adpater lenses and eyes.

[sze5003]

I´ve ordered the lenses from VR Lens Lab for the Samsung Odyssey, which perfectly fit too on the Samsung Odyssey+.

 

The adapter lenses on top of the Odyssey´s regular lenses really came very close to my eyes. So I´ve ordered a new and thicker face cushin form "VR cover" for the Odyssey+ , which gave some space back between adpater lenses and eyes.

I also have lenses from them and I believe I may need that new cover too. But with the new HP headset coming in April I may just save my money to get that and hope that VR lens lab will have lenses for that headset too.

[aleksandr55]

Thank you so much, Guys! :) Your advice is very helpful! :thumbup: With respect, ..:beer:

[VampireNZ]

NVM - sending it back.

Edited March 29, 2019 by VampireNZ

[speed-of-heat]

Something odd in your setup, I have never had the problem you describe with O+

[D4n]

Anyone else having problems in F-14 RIO seat? Since this 70 MB SteamVR patch/since last DCS patch I have this weird cursor issue in cockpit where mouse won't move unless I fool the internal brightness sensor... super weird. (fooling it by placing it on top of my head, so it senses darkness, then on desktop LAlt+Y/Z for selecting mouse, then switching to DCS, then carefully sliding VR headset to eyes so that brightness sensor only detects darkness)

[DutchCoolHand]

Anyone else having problems in F-14 RIO seat? Since this 70 MB SteamVR patch/since last DCS patch I have this weird cursor issue in cockpit where mouse won't move unless I fool the internal brightness sensor... super weird. (fooling it by placing it on top of my head, so it senses darkness, then on desktop LAlt+Y/Z for selecting mouse, then switching to DCS, then carefully sliding VR headset to eyes so that brightness sensor only detects darkness)

 

I have had something similar from the beginning and I think it has something to do with not using the controllers while you start in WMR software. It always starts up first, then steamVR and then DCS

[D4n]

Was a SteamVR bug apparently, when I restarted it the issue was gone :D Now I just need a better CPU for more fps :P or DCS better core usage on 6core CPUs :/

[Nealius]

Is anyone having issues with the Odyssey+ controllers triggering a "TrackIR device has been unplugged" message while in-flight when they disconnect from Bluetooth?