Silversmith Posted October 16, 2018 Share Posted October 16, 2018 Controls werent in the correct folder in Saved Games/Open Beta/Config/Input/module name/? I wonder, could the problem be the Devs are forgetting that a single control binding lua file can , and by default will, contain the bindings for ALL the modules installed? If they are assuming each lua file has only ONE module's bindings in it their data conversion/migration may be faulty. Pure unwarranted speculation, but you never know. Link to comment Share on other sites More sharing options...
ED Team NineLine Posted October 16, 2018 ED Team Share Posted October 16, 2018 Yeah, it looks like people that mad changes might still experience issues, and have to fix from there, the ultimate goal though was to make sure this didnt happen again when it moves to stable release. I want to make sure you arent seeing previous files in Saved Games being deleted by the update, that isnt suppose to happen that I know of. Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug** Link to comment Share on other sites More sharing options...
pepin1234 Posted October 16, 2018 Share Posted October 16, 2018 (edited) Question. Before hotfix I never saw any problem in my controls. What gonna happen now if I install this hotfix? Will remove my previous setting? Edited October 16, 2018 by pepin1234 [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
ED Team NineLine Posted October 16, 2018 ED Team Share Posted October 16, 2018 If you never saw an issue and you didnt have to change anything, you should be ok. Its only removing the base profiles they added with the previous update, but these were not in Saved Games. I had a similar experience where I wasnt affected by this. Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug** Link to comment Share on other sites More sharing options...
pepin1234 Posted October 16, 2018 Share Posted October 16, 2018 Debug crash in my first launch after hotfix. I did a repair and worked good [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Solidsnakekillsu Posted October 16, 2018 Share Posted October 16, 2018 (edited) hey first you all screw up everyone binding with your patch Wednesday so we had to spend part of the day rebind all the aircraft that are made by ED. Then today you release a patch to fix what you messed up with Wednesdays patch and completely screw up everyone keybinding again from when we had to rebind everything from Wednesday. Way to go ED. SO INSTEAD OF BEING ABLE TO FLY THIS EVENING IM GOING TO HAVE TO SPEND IT REBINDING EVERY SINGLE AIRCRAFT AGAIN THAT ISNT A 3RD PARTY AIRCRAFT. SO THANKS FOR A USELESS PATCH Edited October 16, 2018 by Solidsnakekillsu Link to comment Share on other sites More sharing options...
Silversmith Posted October 16, 2018 Share Posted October 16, 2018 (edited) Now here is a Bizarre thing. Many of my modules bindings were broken again after the hotfix. So Starting with the F18 I started to manually reset them all. I saved the profile several times whilst I did this, each time I got the usual message saying 'xxxx.lua file already exists, do you want to replace it. I answered YES of course. BUT the last time I did some updates (removed the last of the duplicate/invalid entries from the Hotfix for the Hornet) and pressed SAVE PROFILE it gave a message I've never seen before that said 'Profile FA18-C has been updated, Save changes Yes or No'. I pressed YES. And instantly ALL my old profiles for all my modules were restored to their correct status, so I didn't have to re-update any of the others, even though after the hotfix they were corrupted. I can't explain that at all, but its saved me hours of re-binding work ! HOORAY I'M FLYING AGAIN ! Edited October 16, 2018 by Silversmith Correct Typos Link to comment Share on other sites More sharing options...
Solidsnakekillsu Posted October 16, 2018 Share Posted October 16, 2018 Well I'll give it a try. Just hope it works really don't want to have to rebind everything that isn't a 3rd party aircraft again Link to comment Share on other sites More sharing options...
MurderOne Posted October 17, 2018 Share Posted October 17, 2018 Again, rebinding, and growing extensively frustrated at it. I'm unable to remember what certain commands were called, so it's caused me to not fly for the day. Sorry, no cool signature here. Link to comment Share on other sites More sharing options...
sc_neo Posted October 17, 2018 Share Posted October 17, 2018 Maybe a good time for some to look into windows's shadow copy system or a third party alternative that gives you easy access to all your stuff on c after the fact. I use Paragon Backup and Recovery 16 (free edition) with a 3 day incremental backup plan. Rounds about to 80-100gb a month depending on how much is being changed on my c drive. Would be way smaller if had not installed a huge game on it as well. So the most i might loose is a little less than 3 days of work and changes. Simply mount the most recent or any of the increment containers (i keep about 4-5 months worth of backups on my data hdd) with a drive letter and i can copy back any file. Btw, depending on your settings in windows, the OS might even store previous versions of files on c, even if you have the shadow copy system disabled. Simply right click on any file, properties, and the right hand tab reads 'previous versions'. Link to comment Share on other sites More sharing options...
AeriaGloria Posted October 17, 2018 Share Posted October 17, 2018 If ED didn’t want us to overwrite their default settings they should just tell us rather than think we all make separate profiles Black Shark Den Squadron Member: We are open to new recruits, click here to check us out or apply to join! https://blacksharkden.com Link to comment Share on other sites More sharing options...
MurderOne Posted October 17, 2018 Share Posted October 17, 2018 FWIW, I copied the LUA files out of the backed up (previously copied and planted on the desktop) controls and pasted them inside the proper folders within DCS and that solved the issue for me. No more frustration. Sorry, no cool signature here. Link to comment Share on other sites More sharing options...
Woxof Posted October 18, 2018 Share Posted October 18, 2018 And now for a new can of worms... If this one has been discussed previously I have not been able to find it anywhere. If it has, someone please point me there. And please, apologies if this is not the right place for it. I couldn't find one more appropriate. The big killer patch did not hose my profiles because I use an externally managed HOTAS (an ancient CH setup with stick, throttle and pedals). So I'm not experiencing the problems most folks seem to be. However... The big patch made the A-10C engine autostart sequencer inoperative. The big fix to the big patch...did nothing at all to fix it. It still doesn't work. And don't get on my case about using the full manual engine start sequence. I'm a real-life pilot (flight instructor, actually) and if there was a single button I could push to make the airplane all ready to fly, I'd damned well be pressing it, not running through the whole engine start checklist every stinkin' time. I'm there to fly the airplane, not revel in the switchology. I thought I paid for an autostart sequencer in the A-10C. Right now I don't have one. My buddy and I own several of the new releases, But we wanted to get into the A-10C before moving on to the new ones after running the A model for many months. Now, for no good reason, we're stuck. Does the autostart even work in the other DCS World airplanes or is it hosed there too? We were fired up for the F-14. I mean, really cranked. Front seat, back seat, very cool. But DCS is not getting another nickle out of either of us until -- or will it turn out to be unless? -- they fix what they broke. Link to comment Share on other sites More sharing options...
NahkaSukka Posted October 20, 2018 Share Posted October 20, 2018 I didn't have any problems with the previous open beta update but this hotfix screwed up things a bit for me, some control bindings were gone but only a few per module so it didn't take too long to fix them. Link to comment Share on other sites More sharing options...
WolfK33 Posted October 20, 2018 Share Posted October 20, 2018 The only thing it did to me was change the order/numbering of my TM MFD Cougars. Had to put them on the desk in another way as I don´t know how to change that lol Link to comment Share on other sites More sharing options...
hellrequiem Posted October 21, 2018 Share Posted October 21, 2018 hey first you all screw up everyone binding with your patch Wednesday so we had to spend part of the day rebind all the aircraft that are made by ED. Then today you release a patch to fix what you messed up with Wednesdays patch and completely screw up everyone keybinding again from when we had to rebind everything from Wednesday. Way to go ED. SO INSTEAD OF BEING ABLE TO FLY THIS EVENING IM GOING TO HAVE TO SPEND IT REBINDING EVERY SINGLE AIRCRAFT AGAIN THAT ISNT A 3RD PARTY AIRCRAFT. SO THANKS FOR A USELESS PATCH Same Problem here and I have to add this one: The thrust axe is unable to assign in EVERY module. For me, this was a USELESS PATCH... so frustrating. Link to comment Share on other sites More sharing options...
Ala12Rv-Tundra Posted October 21, 2018 Share Posted October 21, 2018 This keybind thing issue has been an earthquake for community lol i5 8400 | 32 Gb RAM | RTX 2080Ti | Virpil Mongoose T-50 base w/ Warthog & Hornet sticks | Warthog throttle | Cougar throttle USB | DIY Collective | Virpil desk mount | VKB T-Rudder Mk IV | Oculus Rift S | Buddy-Fox A-10 UFC | 3x TM MFDs | 2x bass shakers pedal plate| SIMple SIMpit chair | WinWing TakeOff panel | PointCTRL v2 | Andre JetSeat | Winwing Hornet UFC | Winwing Viper ICP FC3 - Warthog - F-5E - Harrier - NTTR - Hornet - Tomcat - Huey - Viper - C-101 - PG - Hip - SuperCarrier - Syria - Warthog II - Hind - South Atlantic - Sinai - Strike Eagle Link to comment Share on other sites More sharing options...
Hoffster Posted October 23, 2018 Share Posted October 23, 2018 (edited) I get greyed out controls for the yak-52 even after removing my custom profile and the ones in input folders. How to fix please? Edit: Did a repair, all seems fine except, Kneeboard only available to assign on keyboard for the Yak? a bug? Edited October 23, 2018 by Hoffster Link to comment Share on other sites More sharing options...
imacken Posted October 24, 2018 Share Posted October 24, 2018 I've been on holiday for a while, and am confused by what is happening here. Before i went on holiday, I had the controller issue that's been discussed due to the diff.lua files in the appropriate subfolders of 'Program Files\Eagle Dynamics\....'. I rebound various modules. Then, I read about a hotfix that was going to delete the offending diff.lua files, and that everything was going to be OK with the 'Saved Games' diff.lua files. So, I get back today, updated DCS, tried out the Spitfire, and couldn't do anything. Throttle, rudder, etc. all rebound - again! The ED diff.lua files still seem to be in my install. Can someone simply tell me what is going on here, and what I need to do to get my old bindings back? Thanks a lot. Intel i7 12700K · MSI Gaming X Trio RTX 4090 · ASUS ROG STRIX Z690-A Wi-Fi · MSI 32" MPG321UR QD · Samsung 970 500Gb M.2 NVMe · 2 x Samsung 850 Evo 1Tb · 2Tb HDD · 32Gb Corsair Vengance 3000MHz DDR4 · Windows 11 · Thrustmaster TPR Pedals · Tobii Eye Tracker 5 · Thrustmaster F/A-18 Hornet Grip · Virpil MongoosT-50CM3 Base · Virpil Throttle MT-50 CM3 · Virpil Alpha Prime Grip · Virpil Control Panel 2 · Thrustmaster F-16 MFDs · HTC Vive Pro 2 · Total Controls Multifunction Button Box Link to comment Share on other sites More sharing options...
Leutnant_Artur Posted October 29, 2018 Share Posted October 29, 2018 Does anyone have a problem with A10C controls ? After patch I cant start both engines with my throttle but stock mappings, and autostart aren't working as well. [sIGPIC]Luftgangsta[/sIGPIC] Link to comment Share on other sites More sharing options...
LeCuvier Posted October 29, 2018 Share Posted October 29, 2018 Does anyone have a problem with A10C controls ? After patch I cant start both engines with my throttle but stock mappings, and autostart aren't working as well. Before the latest update it was necessary to put the two throttle levers into the OFF position, and then move them to ON when the autostart messages indicated Left/Right Engine Start. In OB that's no longer necessary as I just found out. So for me it's working perfectly now. LeCuvier Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5 Link to comment Share on other sites More sharing options...
Leutnant_Artur Posted October 29, 2018 Share Posted October 29, 2018 Before the latest update it was necessary to put the two throttle levers into the OFF position, and then move them to ON when the autostart messages indicated Left/Right Engine Start. In OB that's no longer necessary as I just found out. So for me it's working perfectly now. I have tried that too - no effect. [sIGPIC]Luftgangsta[/sIGPIC] Link to comment Share on other sites More sharing options...
Recommended Posts