VNAO T-45 Goshawk

[prestupnik]

Bat 1 Bat2 Gen switches problem answer

https://discord.com/channels/406943145775857664/1431990939185971261

Edited October 29 by prestupnik

[Morpheus]

Hi, has anyone run the T-45 with SimShaker? Didn't find anything on dedicated Discord 

[fagulha]

56 minutes ago, Morpheus said:

Hi, has anyone run the T-45 with SimShaker? Didn't find anything on dedicated Discord 

Did you tried with the profile/Model set to "Generic Jet Engine" in SimShaker main menu?

[Morpheus]

1 hour ago, fagulha said:

Did you tried with the profile/Model set to "Generic Jet Engine" in SimShaker main menu?

I'll give a try, for OH-6, for example, I had to add lines in MI-8 section in simshaker.lua with 1/2 success for effects.

[flyingscotsman]

I've enjoyed the T-45, but I have a problem with the sound. I have a loop of the aircraft restarting regularly? Does anyone else have this?

Is there a way I can overwrite the sound. Any suggestions/assistance appreciated.

[Rudel_chw]

47 minutes ago, flyingscotsman said:

I've enjoyed the T-45, but I have a problem with the sound. I have a loop of the aircraft restarting regularly?

 

Please, can you describe the issue in more detail, so that I can try to reproduce it on my DCS?

[flyingcyrus]

Ok, finally got time for some testing...

First, thanks again for this huge amount of work , resulting in a beautiful product. External model and cockpit are really on par with some paywares.

But I've got a few things to complain about

• AOA indicator is at 8° by default, on the ground, with the aircraft steady... And in the air the readings are still shifted by those 8° (velocity vector on the horizon, pitch around 0°)
• On the ground, with the brakes applied, velocity vector is down around 4° (should be zero unless it's a specific behavior of the T45 HUD to show your brakes are on  )

Thanks
 

[LCO489]

2 hours ago, flyingscotsman said:

I've enjoyed the T-45, but I have a problem with the sound. I have a loop of the aircraft restarting regularly? Does anyone else have this?

Is there a way I can overwrite the sound. Any suggestions/assistance appreciated.

I've had this problem some time ago. It has to do with other mods, MiG-25 i guess.

[Steel Jaw]

Excellent 

[RustBelt]

On 10/27/2025 at 2:44 AM, prestupnik said:

Bat 1 Bat2 Gen switches problem answer

https://discord.com/channels/406943145775857664/1431990939185971261

Getting nothing with this link.

[hreich]

Does somebody know how to add option to map lights switch to HOTAS throttle, i dont see any light switch in options inside DCS?

[RustBelt]

Generally I just use Quaggles to strongarm the binds in. 

https://github.com/Quaggles/dcs-input-command-injector?tab=readme-ov-file

 

[Minsky]

1 hour ago, RustBelt said:

Getting nothing with this link.

Join VNAO discord first:

https://discord.gg/R8R2krqmCj

1 hour ago, hreich said:

Does somebody know how to add option to map lights switch to HOTAS throttle, i dont see any light switch in options inside DCS?

What "lights switch", there are many of them.

If you looking for the master switch, the names are Exterior Lights Master FORWARD and Exterior Lights Master AFT.

[hreich]

Ta

12 minutes ago, Minsky said:

Join VNAO discord first:

https://discord.gg/R8R2krqmCj

What "lights switch", there are many of them.

If you looking for the master switch, the names are Exterior Lights Master FORWARD and Exterior Lights Master AFT.

Taxi light/ landing light, exteenal nav light, anti collision light..and also master switch if it's not implemented

[flyingscotsman]

Rudel_chw & LCO489, Thank you for replying

The aircraft has the engine running, but after a minute or so, with my engine still running, I can hear 'another' aircraft starting up, goes for anohter minute or so and repeats.

LCO489, I'll delete any Mig 25 and you've also  given me an idea

Will report back

Thanks

 

[flyingscotsman]

Hi Rudel_chw, No need to go further, I got rid of mods and flew about, no problem, so It's a MOD,

I apologise for not thinking of it, (as I did this with you a couple of weeks back)  however, I have memory problems (Pernicious Anemia) where you forget things.....I have it written in 'things to do when it's not right' but again, you have to remember to look there. Another example today, the Doctor asked my address, I got the house number wrong....took me a few seconds to realise it, but it's a wake up call..... it won't get any better, but that's the joys of being 69 and a bit.

LOC489, Thats' made me work through the shed load of MODS to find the culprit

 

THANK YOU GENTS, with apologies

 

[RustBelt]

20 hours ago, Minsky said:

Join VNAO discord first:

https://discord.gg/R8R2krqmCj

Invalid or expired. I really dislike Discord.

[Minsky]

40 minutes ago, RustBelt said:

Invalid or expired. I really dislike Discord.

No, it is not.

[RustBelt]

1 hour ago, Minsky said:

No, it is not.

That’s what my Discord app says. 

Edited yesterday at 07:23 AM by RustBelt

[Minsky]

16 minutes ago, RustBelt said:

That’s what my Discord app says. 

I created it yesterday, set to never expire, and just tested a minute ago. Dunno why it doesn't work for you

[speed-of-heat]

also works for me for what it is worth 

[RustBelt]

1 hour ago, Minsky said:

I created it yesterday, set to never expire, and just tested a minute ago. Dunno why it doesn't work for you

So it goes with Discord.

[hreich]

I found a file -clickabledata.lua in cockpit/scripts folder with this...How to modify default.lua file so i can assign those switches to my TM Warthog HOTAS?

elements["PNT_402"]    = default_3_positiontumb(("Anti-Collision/Strobe Lights, BOTH/OFF/A-COLL"), devices.LIGHTS, EFM_commands.strobeLight,  402)

elements["PNT_404"]    = default_3_positiontumb(("Tail Lights, BRIGHT/OFF/DIM"), devices.LIGHTS, EFM_commands.tailLights,  404)

elements["PNT_405"]    = default_3_positiontumb(("Wing Lights, BRIGHT/OFF/DIM"), devices.LIGHTS, EFM_commands.wingLights,  405)

elements["PNT_406"]    = default_3_positiontumb(("Formation Lights, BRIGHT/OFF/DIM"), devices.LIGHTS, EFM_commands.formationLights,  406)

elements["PNT_401"]    = default_2_positiontumb(("Landing/Taxi Light, ON/OFF"), devices.LIGHTS, EFM_commands.landingLight,  401)

elements["PNT_403"]    = default_2_positiontumb(("Nav Lights, FLASH/STEADY"), devices.LIGHTS, EFM_commands.navLights,  403)

elements["PNT_400"] = default_springloadedswitch(("Exterior Lights Master Switch"), devices.LIGHTS, EFM_commands.lightsMaster, -1,0,1, 400)

[flyingcyrus]

Ok, I'm still stuck with my AOA odd behavior. Do you guys experience this as well ?
Look at the screenshot : pitch around zero, VS around zero, velocity vector on the horizon, should have AOA around zero but got 8 (analog) and 8.3 (digital) value !
Did I miss something ? 
I uninstalled the 1.2 and got back to the 1.0.1 version, same problem. How the hell could I've miss that during the hours I spent on the previous one ?
(and I just checked othere aircrafts like M2000 or F/A 18, whose AOA is perfectly consistent with the primary flight parameters...)

 

Edited yesterday at 07:14 PM by flyingcyrus

[Jarda]

Yeah, I have the same issue on version 1.2.