Simpit Posted March 4, 2022 Share Posted March 4, 2022 Since the last patch I notice a very strang resolution of FLIR. It´s massively "overlighted" with low contrast. It´s very difficult to see the target. Is this a realistic display of FLIR? See jpg attached below! Kind regards Hans Dieter System: Win 11 Prof, 64 Bit, AMD 4350 Quad-Core, Gigabyte-Board 970A-UD3P, 16 GB-RAM; ASUS GTX 1080 8 GB - Nvidia Geforce Link to comment Share on other sites More sharing options...
Faelwolf Posted March 5, 2022 Share Posted March 5, 2022 I believe a FLIR update is coming in the next patch, along with the Apache, etc. Link to comment Share on other sites More sharing options...
Lancer68 Posted March 5, 2022 Share Posted March 5, 2022 I too have noticed a difference. I never had to adjust brightness and contrast until the last update. I suspect the change occurred because of the rework of FLIR. Link to comment Share on other sites More sharing options...
Steel Jaw Posted March 5, 2022 Share Posted March 5, 2022 Agree and I must say in its current state the FLIR is useless. "You see, IronHand is my thing" My specs: W10 Pro, I5/11600K o/c to 4800 @1.32v, 64 GB 3200 XML RAM, ASUS RTX3060ti/8GB. Link to comment Share on other sites More sharing options...
AndyJWest Posted March 5, 2022 Share Posted March 5, 2022 It seems readable enough to me if you adjust the contrast and brightness. Link to comment Share on other sites More sharing options...
FrostLaufeyson Posted March 5, 2022 Share Posted March 5, 2022 Since the last update to the IR, the brightness of these screens has been high. But I feel like this should only be temporary (although this seems to have been going on for a month or two). But if you have a second display, project DDI/AMPCD to the second display through lua script, you will find that its brightness is no problem. At present, the contrast and gain can only be adjusted manually to make the FLIR picture look normal. Link to comment Share on other sites More sharing options...
Weasel Posted March 5, 2022 Share Posted March 5, 2022 To avoid too much expatations, iirc FLIR update first comes for Apache only, other modules like the Hornet or Viper will benefit in the near future 1 Link to comment Share on other sites More sharing options...
Drac Posted March 5, 2022 Share Posted March 5, 2022 Same here. Adjusting contrast and brightness helps a little bit. Link to comment Share on other sites More sharing options...
wilbur81 Posted March 5, 2022 Share Posted March 5, 2022 9 hours ago, AndyJWest said: It seems readable enough to me if you adjust the contrast and brightness. Indeed. No problems here. i7 8700K @ Stock - Win10 64 - 32 RAM - RTX 3080 12gb OC - 55 inch 4k Display Link to comment Share on other sites More sharing options...
Viral-51st-Vfw Posted March 5, 2022 Share Posted March 5, 2022 Decrease range below 40nm make a difference? Link to comment Share on other sites More sharing options...
VDV Posted March 5, 2022 Share Posted March 5, 2022 (edited) Talking to ATFLIR, has anyone else noticed that its incredeblly difficult to track a moving targets?? I have a lot of hard times with ATFLIR when i need to lock and track moving targets....its maybe a bug?? Edited March 5, 2022 by VDV Link to comment Share on other sites More sharing options...
Simpit Posted March 5, 2022 Author Share Posted March 5, 2022 (edited) vor 6 Stunden schrieb Drac: Same here. Adjusting contrast and brightness helps a little bit. Yes, I checked it before posting this thread. Adjusting FLIR helps only a little (concerning to my 1920res-monitor). Edited March 5, 2022 by Simpit Kind regards Hans Dieter System: Win 11 Prof, 64 Bit, AMD 4350 Quad-Core, Gigabyte-Board 970A-UD3P, 16 GB-RAM; ASUS GTX 1080 8 GB - Nvidia Geforce Link to comment Share on other sites More sharing options...
VDV Posted March 5, 2022 Share Posted March 5, 2022 maybe it will be okay when we have new flir tech??? coming with apache?? Link to comment Share on other sites More sharing options...
Weasel Posted March 5, 2022 Share Posted March 5, 2022 maybe it will be okay when we have new flir tech??? coming with apache??To avoid too much expatations, iirc FLIR update first comes for Apache only, other modules like the Hornet or Viper will benefit in the near future Link to comment Share on other sites More sharing options...
VDV Posted March 5, 2022 Share Posted March 5, 2022 (edited) its not true , i will come with apache for all modules which support flir tech Edited March 5, 2022 by VDV Link to comment Share on other sites More sharing options...
CBStu Posted March 6, 2022 Share Posted March 6, 2022 Yep, Atflir is a real pain to use. I always have to screw around w/ brightness and contrast knobs. I also have problems w/ moving targets. Link to comment Share on other sites More sharing options...
AndyJWest Posted March 6, 2022 Share Posted March 6, 2022 I'd guess that they put brightness and contrast knobs there in the real aircraft because they needed adjustment depending on conditions... 1 Link to comment Share on other sites More sharing options...
pete_auau Posted March 7, 2022 Share Posted March 7, 2022 17 hours ago, CBStu said: Yep, Atflir is a real pain to use. I always have to screw around w/ brightness and contrast knobs. I also have problems w/ moving targets. Just imagine what the rw pilots put up with Link to comment Share on other sites More sharing options...
CBStu Posted March 7, 2022 Share Posted March 7, 2022 Yep, I am sure it is not just us on DCS. But recently I have flown several missions where the flir display shows nothing but light green. Not even a shadow of an island or a horizon. I hope the RL guys don't have it that bad. I will say though that I love Atflir for bombing stationary targets. Lot's of fun designating the target w/ the flir (or multiple targets) and then watching the hit or hits either on the flir or in F6. Link to comment Share on other sites More sharing options...
Weasel Posted March 7, 2022 Share Posted March 7, 2022 I am very excited to see the improved FLIR in case of the Hornet Link to comment Share on other sites More sharing options...
XCNuse Posted March 10, 2022 Share Posted March 10, 2022 (edited) On 3/5/2022 at 8:50 AM, Weasel said: To avoid too much expatations, iirc FLIR update first comes for Apache only, other modules like the Hornet or Viper will benefit in the near future Meanwhile, we know the Gazelle and Harrier already have the updated FLIR API in their systems and ready to go with the upcoming patch. It really would be a shame if ED delays it on their modules without reason, and by shame, I mean... annoying. Edited March 10, 2022 by XCNuse Link to comment Share on other sites More sharing options...
Blackfyre Posted March 10, 2022 Share Posted March 10, 2022 37 минут назад, XCNuse сказал: Meanwhile, we know the Gazelle and Harrier already have the updated FLIR API in their systems and ready to go with the upcoming patch. It really would be a shame if ED delays it on their modules without reason, and by shame, I mean... annoying. Annoying or not it was the plan. As far as I understand each FLIR capable device will receive separate update. Proof link from Russian forum: Верните короновирус в качестве главной проблемы, спать в маске буду, обещаю. Скрытый текст Hardware: AMD 5900x, 64Gb RAM@3200MHz, NVidia RTX3070 8Gb, Monitor 3440x1440(21:9), Samsung 980pro 1Tb NVMe SSD, VKB Gunfighter+MCGU, Virpil Throttle CM3, VKB T-Rudder, TrackIR. Link to comment Share on other sites More sharing options...
Recluse Posted March 10, 2022 Share Posted March 10, 2022 (edited) I saw this image on the RAZBAM discord. For AV8B NA Harrier, of course... The "improvement" looks to me like a WORSE image closer to reality rather than an "improvement" to FLIR quality in DCS. Not sure what to think about it.... LEFT = NEW Right = Current Edited March 10, 2022 by Recluse Link to comment Share on other sites More sharing options...
Dragon1-1 Posted March 10, 2022 Share Posted March 10, 2022 That's what it should be like. Don't expect any "improvement" in image quality, or anything to make things easier. Our FLIR systems are vastly overperforming right now, there's a reason TV option exists on all the FLIR pods. Thermal imaging isn't a magic enemy highlighting tool, but a camera that sees what temperature things have. When it's night, or in winter, that's pretty great. When it's hot, everything will glow. Humidity also degrades it pretty badly. Any move to implement these limitations will make TGPs harder to use. Link to comment Share on other sites More sharing options...
VDV Posted March 11, 2022 Share Posted March 11, 2022 (edited) sorry about stupid question, but i havent been flying on Hornet for a months....is autolasing for laser guided weapons now implemented? and how it works? thanks. Edited March 11, 2022 by VDV Link to comment Share on other sites More sharing options...
Recommended Posts