BlacleyCole

It seems after the deletion of the saved games directory and a couple of reboots it may take a few presses but it’s working now

I have a 4K display and the default was so small I couldn’t read it so I upedthe resolution until it was to my liking it was the last setting try going to the one higher than your using and see if that helps

MilesD I trimmed the tape from the opening in the hms bracket for the rift s which is what I figured you put it there for. Just remove the board and leave the mount senor still usable if needed mount solidly mounted

Somehow after deleting the saved games folder and a reboot and a couple presses of the spacebar it is working now we will see for how long

Found it now to find the install information

I have a 2 year old rift for sale with three sensors two controllers and the head mounted display. $200 plus shipping I’m also selling my Pro Flight Trainer PUMA helicopter hotas $800 plus shipping either additional shipping for fully plug and play setup. Less shipping for the item the way I got it that require simple assembly plus labor to tear down item for shipping

How much do I owe you send a funds request to w88310(at)gmail(dot)com thru PayPal and I’ll send it ‘your way

Thanks buzz I guess I’ll try the a10 first

I’m not the only one as I have researched other post with the problem but the solutions didn’t work and yes I tried the on screen windows keyboard it didn’t work either thanks for the tip I’ll try that out it was for the a10c startup correct

MilesdD, I went to install the hms on my rift s but there’s a sensor right there do I cover it up with the tape and hms or do I shift it to the side and leave the sensor open?

Ok after almost a year not being able to work on the pit I’m working my way back. Part of it has to do with my blog. The rest I miss it I’m setting it up for the a-10c in vr I know almost anything works for vr. I’m going to have the warthog hotas and trp pedals and point ctrl for the non hotas bound stuff. This is the intial config and once I complete my training and get the parts from Rel4y for the cougar’s throttle and stick then I’ll swap out the throttle for f16c throoand put the rebuilt stick on a side mount and I’ve ready to learn the f16c . Later I’ll install the maxflight collective and maybe cyclic or the warthog stick back in just Velcro and I’m ready to learn the huey again. If I switch over to xp11 and need a yoke from honeycomb I’ll use the appropriate throttle foe the number of engines until the honeycomb throttle is released then I’ll be good for ga/comm flight. Now if I feel like the need for speed I’ll pull out the yoke/stick and tpr pedals and pop in the tm racing controls. All in vr. I might have things that will be up for sale if things work out. Now I got the pit, computer, vr hmd,and controls all setup. The one thing I’ve not looked into is the audio system. Iirc the mb has a good sound car but it can’t do anything without the amp and speakers. I plan on using the intern mic and speaker connection for my mic and headset I want the other sounds to come from an external setup. Plus besides my gametrix seat cover I want some more engine feel plus external sounds. Ok what’s the best way for a compact setup ? Which one to get or what to get and how best to set it up. I would have used some of my old surround sound setup but someone felt they needed it more.

Ok I got it just wanted to make sure I still need to mount it and get my new vr working before I calibrate it if I have troubles I’ll get back In contact with you

Thanks

No I was trying to type in the dark and I’m bad about not proofreading I got so used to my iPad I’ve forgot how to type on a pc The program recognized the spacebar in the controls option but doesn’t in the missions it is program related and I’m just trying to find a work around until I can find and fix the problem. I’m thinking of adding a timer to change the flag so the mission will pause then continue.

What’s the difference between the warthog grip and the new viper grip that thrustmaster has just released? I know from my limited research the warthog and the viper use the same stick it’s the throttle that’s different.

Ok the a10c is complete and slow and I have it. Ok the f16c is not complete and fast and I own it. Ok which is the easiest to learn?

Well I both plus others I’m just wanting to learn by the best way and I don’t mean the typical dcs way hop in play with it and you finally get it right. I want to learn the way the usaf teaches it both academic and flying . That way you know what to do why you are doing and what the end result should be. You will not just guess at an outcome.

Rural thanks for the links and if you come across f16 or uh1 please let me know. My problem is the training missions aren’t recognizing the spacebar I’ve tried the default binding, no binding, and rebuilding the dcs directory un saved games and the end result is the same . Nothing has worked since so upgrade. What I need to be able to do is remove the with for spacebar then trigger that flag with a timer or some other input that will be acknowledged.

I’m looking for several in-depth tutorials either written or video that cove the triggers fly out in depth. I’m thinking a tutorial on the interface of the mission editor and each of its three panes, trigger, condition, action and how the relate and work together maybe even make a statement comprised of the trigger, condition, and action so you know how to read them. Then an in-depth explanation of the trigger pane with all current internal options. Once that’s been covered a in depth description of all the conditions and there options for each variable. And finally the same of the action pane go thru each action explain the variable and what they stand for like flag x is and was initially set here and the reset here which called this action or the flag x is this and until this done the progress will halt if we do this it will change the flag if x is 999 and progress will continue THEN MAYBE A FEW EXAMPLESLE OF EACH SO WE KNOW HOW TO USE THEM. Sorry for caps Tia

Yes I’ve tried the default bind and no mind so I’m not sure what to do there is a post where I tell all and posted the dcs old and dcs log files But I was hoping some fine users would tell me you correct Lon the syntax and swap this line with this and here’s why Also tried rebuilding the dcs folder in saved games no luck did not. Work.

Can you please do an very in-depth tutorial on each of the following the trigger and all options explains what they do and how to use them, then in another tutorial cover the conditions pane on the me trigger pop up and what each condition is and when and when not to use them and all the options to be included. And the one that I’m looking for at the moment is the sctions pane. I need to know how each action is designed to be used and what each variable is and how it pertains to the action . Please

I’m wanting to modify thr training missions to replace all references to the spacebar to go on with a timer that waits a bit before continuing. I know the line waiting for the spacebar uses “x: stop until user response ([flag], [number]). Flag is 2 in this first instance and 999 the number. I’m not sure where the flag I’d comes from or if the number has a relationship with the flag , spacebar or what. I’m not sure if I need to find all references to the flag or the number this line is part of a 4 line third window. In my understanding they work sequentially from the top to the bottom and only run if the conditions in the middle window is valid nut once the focuse move to the third window it processes the lines in order from top down. In this case it goes txt msg, verbal msg, txt msg verbal message then the stop line iirc. The reason for learning how to do this is every ting mission will not work for me because it will not read the space bar. Any help would be greatly appreciated.

ok ive tried several thingd ti get the training middiind to work ive cleared all bindingd to the spacebar and ive went in and det it to defsult dettings both failed to get the mission to proceed. so im think thst i would go change every reference to the spcebar to a time delayexact time may vart. ok im in the mission editor and in thie mission the developer use the following statement to see if the udser has pressed the spacebar "x: start wait user responce (2,999) . the "2" isthe flag that it is looking for ifg i understand correctly. the "999" this id the user redponse value if i am correct, iem the spacebar output. what im going to substitue thid line with some type or timer command if possible . it been a year since i did anyuthing in the mission editor is there a user manual out ora documentthe fully explanes each of the statemtns the are default to the me? any help will be warmly recedived

Once I receive rel4y’s parts to modernize mine I’ll have sensors and a pcb for the throttle that I’ll not need . I. Not sure if that’s what your looking for.

Well as an owner of both think about this to use the cougar throttle that is unmodded it must be plugged into the cougar stick using the d9 plug. Rel4y has a usb mod for it along with his magnetic sensors. I’m awaiting parts to fully mod both. Now here is the difference between the cougar and warthog sticks, the cougar is using old potentiometers and the warthog uses heart sensors basically analog vs digital