wolle Posted April 27, 2018 Posted April 27, 2018 Since I updated to the latest beta, the trim button in the Huey has no effect any more. I checked that it is still bound, and tested both "default" and "central position trimmer mode". Also checked that it is working in the Mi-8 just as before. Anyone else have that? [sIGPIC][/sIGPIC] Intel Core I7 4820K @4.3 GHz, Asus P9X79 motherboard, 16 GB RAM @ 933 MHz, NVidia GTX 1070 with 8 GB VRAM, Windows 10 Pro
BlacleyCole Posted April 28, 2018 Posted April 28, 2018 I just tried it on a cold and dead ac no effect I thought that was the problem I wanted t adjust the pitch neutral position so I don’t have to reach so far forward on my current setup until I’m able to reposition my puma controls. BlackeyCole 20years usaf XP-11. Dcs 2.5OB Acer predator laptop/ i7 7720, 2.4ghz, 32 gb ddr4 ram, 500gb ssd,1tb hdd,nvidia 1080 8gb vram New FlightSim Blog at https://blackeysblog.wordpress.com. Go visit it and leave me feedback and or comments so I can make it better. A new post every Friday.
Chic Posted May 1, 2018 Posted May 1, 2018 Workin for me. A Co, 229th AHB, 1st Cav Div ASUS Prime Z370-A MB, Intel Core i7 8700K 5.0GHz OC'd, RTX 3090, 32GB DDR4, 1TB SSD, Win 10 Samsung 65" 4K Curved Display (Oculus Rift occaisionally), Track IR5, VoiceAttack, Baur's BRD-N Cyclic base/Virpil T-50CM Grip, UH-1h Collective by Microhelis & OE-XAM Pedals. JetSeat & SimShaker for Aviators. JUST CHOPPERS
Shadow KT Posted May 1, 2018 Posted May 1, 2018 Works for me ! On the other hand the trigger doesn't register at all 'Shadow' Everybody gotta be offended and take it personally now-a-days
BlacleyCole Posted May 2, 2018 Posted May 2, 2018 Mines working now but since my cyclic is non centering I rarely use it BlackeyCole 20years usaf XP-11. Dcs 2.5OB Acer predator laptop/ i7 7720, 2.4ghz, 32 gb ddr4 ram, 500gb ssd,1tb hdd,nvidia 1080 8gb vram New FlightSim Blog at https://blackeysblog.wordpress.com. Go visit it and leave me feedback and or comments so I can make it better. A new post every Friday.
wolle Posted May 4, 2018 Author Posted May 4, 2018 Mines working now but since my cyclic is non centering I rarely use it How did you get it to work? [sIGPIC][/sIGPIC] Intel Core I7 4820K @4.3 GHz, Asus P9X79 motherboard, 16 GB RAM @ 933 MHz, NVidia GTX 1070 with 8 GB VRAM, Windows 10 Pro
Kang Posted May 7, 2018 Posted May 7, 2018 Hm, did you remember to switch on the trim system on the centre console?
Robert31178 Posted May 10, 2018 Posted May 10, 2018 I ended up rolling back my version since my squadron wanted to do so, but my trim worked just fine when I did fly in 2.5.1
IJammer Posted May 12, 2018 Posted May 12, 2018 Yup, as Kang said... make sure you have the use trim button engaged top of center consul... caught me out a few times!
ebabil Posted June 1, 2018 Posted June 1, 2018 not working for me either FC3 | UH-1 | Mi-8 | A-10C II | F/A-18 | Ka-50 III | F-14 | F-16 | AH-64 | Mi-24 | F-5 | F-15E| F-4| Tornado Persian Gulf | Nevada | Syria | NS-430 | Supercarrier // Wishlist: CH-53 | UH-60 Youtube MS FFB2 - TM Warthog - CH Pro Pedals - Trackir 5
Cibit Posted June 9, 2018 Posted June 9, 2018 My weapon release does not work anymore. Button 2 on the warthog. I need to press spacebar to fire rockets and miniguns from pilot seat i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
Gizzy Posted June 9, 2018 Posted June 9, 2018 Cib, all mappings are fine my end so it may be local. Rename this folder as a backup and remap your bindings.... should fix it :) ...Saved Games\DCS.openbeta\Config\input\UH-1H\
Cibit Posted June 12, 2018 Posted June 12, 2018 That fixed it although not immediately. It was 2 days later I retried and it worked this time. Now to map all the other controls again :) i5 8600k@5.2Ghz, Asus Prime A Z370, 32Gb DDR4 3000, GTX1080 SC, Oculus Rift CV1, Modded TM Warthog Modded X52 Collective, Jetseat, W10 Pro 64 [sIGPIC][/sIGPIC] Adding JTAC Guide //My Vid's//229th AHB
Quadg Posted June 12, 2018 Posted June 12, 2018 @cibit, I had that same problem with the fire button but about a month back. and mine fixed itself in a couple of days. would not let me assign a button to fire. My Rig: AM5 7950X, 32GB DDR5 6000, M2 SSD, EVGA 1080 Superclocked, Warthog Throttle and Stick, MFG Crosswinds, Oculus Rift.
Jafferson Posted June 14, 2018 Posted June 14, 2018 (edited) I got the same, Trim is dead. Force Trim switch is on! Centrel trimmer mode is in the options selected. The Trim button on the Stick is mapped, can see the movement of the button in cockpit, but without effect. --- i tryed to delet the profiles and remap the bindings, but Trim is still dead. --- Update: I have delted and reinstalled the module, now everyting is fine, backup profile is good :thumbup: Edited June 14, 2018 by Jafferson
Recommended Posts