All Activity

Have you installed the latest patch?

Thanks @Mistermann it works. I too never realized the icon on the right. Odd that the drop down and icon bring up the same template list, but only one works

Продам ФатБлекМамбу 3 с ручкой современной авиации+ Кг-12, цена 30 тыс, ручка современной авиации состояние 5+. Кронштейн ВКБ удлинённый с допами + кронштейн для руда или мыши по 10 тыс. Если комплектом добавлю Электронику ВКБ контроллер, марсы, кнопки тумблера, железную механику, платы расширения. Комплект не использовал лет 5) Просьба писать в личку.

Wow... That Did It. Definitely not an intuitive solution, but it worked. Thank You!!

Oh, I know. It was the first time he didn't ride me about formation. I don't ride formation with AI that can suddenly turn right into me. I just don't recall him making that statement before.

That's weird, maybe you did try to get in in the past? Try clearing your cookies/cache and try again? Or try this link https://discord.gg/x2GNeBvT

#include <LiquidCrystal_PCF8574.h> /* Tell DCS-BIOS to use a serial connection and use interrupt-driven communication. The main program will be interrupted to prioritize processing incoming data. This should work on any Arduino that has an ATMega328 controller (Uno, Pro Mini, many others). */ #define DCSBIOS_IRQ_SERIAL #include "DcsBios.h" #include "Wire.h" #include "OLedI2C.h" OLedI2C LCD; void onCmsp1Change(char* newValue) { LCD.sendString(newValue,0,0); } DcsBios::StringBuffer<19> cmsp1Buffer(0x1000, onCmsp1Change); // ----- print the second line to the LCD display ----- void onCmsp2Change(char* newValue) { LCD.sendString(newValue,0,1); //Now includes the cursor position data (col, row) } DcsBios::StringBuffer<19> cmsp2Buffer(0x1014, onCmsp2Change); const byte cmspModePins[5] = {A0, A1, A2, A3, A4}; DcsBios::SwitchMultiPos cmspMode("CMSP_MODE", cmspModePins, 5); DcsBios::Switch2Pos cmspArw1("CMSP_ARW1", 10); DcsBios::Switch2Pos cmspArw2("CMSP_ARW2", 11); DcsBios::Switch2Pos cmspArw3("CMSP_ARW3", 12); DcsBios::Switch2Pos cmspArw4("CMSP_ARW4", 13); DcsBios::Switch3Pos cmspMws("CMSP_MWS", 3, 2); DcsBios::Switch3Pos cmspJmr("CMSP_JMR", 5, 4); DcsBios::Switch3Pos cmspRwr("CMSP_RWR", 7, 6); DcsBios::Switch3Pos cmspDisp("CMSP_DISP", 9, 8); DcsBios::Switch2Pos cmspJtsn("CMSP_JTSN", 17); DcsBios::Switch2Pos cmspRtn("CMSP_RTN", 16); DcsBios::Switch3Pos cmspUpdn("CMSP_UPDN", 15, 14); void setup() {DcsBios::setup(); Wire.begin(); LCD.init(); } void loop() { DcsBios::loop(); }

this menu

Hi fellas. In about 6 months I'm looking to a new PC and to jumping into VR for the first time. If we had to pick the hands down, best VR set for DCS, which would it be? I'm a bit confused about pimax. Are you required to pay a monthly subscription to run it? Cheers.

Please check again, I ran your mission and it seems to be working now. (although the missiles have a weird wobble after launch - fixed internally)

I'll try to get some more info, but I believe, if I am not mistaken its waiting on some of thw work being done with Vulkan.

Devs are probably aware of the features of the DCS DTC mod. I believe what that mod has is a desired starting point. WP, Seq, CMS, Comms, RDR settings, prePlanned, HMD and other stuff is a good start. Also the ability to share that data with peers.

Hi @Fox-one-76. I've tried numerous things but am still unable to reproduce this. Can you confirm that you aren't running DCS as administrator, e.g. right-click both your shortcut for DCS, as well the DCS.exe file being used, and then select properties and make sure "Run as administrator" isn't ticked. I also run with OpenKneeboard and Open tablet driver so wouldn't expect an issue there. Can you try without the streamdeck and DCSBIOS? This issue occurs in both VR and 2D correct? I'll re-run all my tests again in VR but would expect this issue to exist across both. WhisperAttack transcribes the speech-to-text and then executes VoiceAttack with this, which will reuse the existing VoiceAttack if its already running. It's almost like this part of it is being blocked until focus is taken away from DCS. For example, when you start up VoiceAttack for the first time do you get a message "Do you want to allow this app to make changes to your device?". Is this VoiceAttack v1 or v2? I'm assuming this profile is configured with "Send this command to active window". (which is correct) null

A Cessna is actually slightly harder to fly than a jet trainer, though there's a little less going on. Mostly, it has to do with the fact it has a prop, and no automatic fuel management, so you have to pay attention to the fuel tanks (the baseline 172 has no roll trim, either, though spiffier versions may have an autopilot). Real pilots start out on GA props because they're cheap to operate, so it makes sense to teach the basics on the cheapest airframe to buy and run that you can get. There's nothing wrong with starting out in a low powered jet instead, as we don't have to pay for gas and repairs for our simulated aircraft. An L-39 or C-101 will teach you the flying skills just fine. The only "advanced" feature that you have to use is the retractable landing gear, which is good to get used to, anyway. As for airliners, they're actually much easier to operate than most other aircraft. If you can master the C-101, just about any modern airliner won't be a huge leap, aside from programming the autopilot, which is mostly done on the ground, anyway. While the main draw in DCS is the fighters, it's a very solid sim with full clickable cockpits. There'll eventually be a C-130 in DCS that should be closer to how an airliner is flown (though it's still vastly more maneuverable).

Sorry, not going to give bad advice for that reason.

On Reddit, people say that you can configure this through the software for the regular Alpha, so this is not actually a feature of the Prime: https://old.reddit.com/r/hotas/comments/wykgz4/virpil_constellation_alpha_vs_alpha_prime_quick/ilxfvk2/

hello. i put your log in the discord log analyzer and here is the output. Advice Change your pagefile to at least 32768 MB (initial size)., If you have stability or performance issues pointing to your GPU, rollback the GPU driver to version 566.36, Windows 10 will be EOL Oct 14th 2025. Upgrade to Windows 11., Verify that this is configured correctly in Windows: Game Mode disabled, Hardware accelerated GPU scheduling disabled please return if you have any questions. buona fortuna.

Yeah I hate to plug another game but if you want to learn real life-like flying and general aviation, MSFS is more suitable. DCS aircraft are quite realistic but they aren’t like the general aviation you’d begin flying IRL. Then DCS lacks a realistic civilian environment to fly in with nav aids, airports, weather and such, unless you plan on flying in Syria or Afghanistan Now if you want to make stuff go boom this is the place

Yeah, super advice, man — chase away the possibly only girl we have on the forums.

Nothing to do with AMD, it has everything to do with the way you have them plugged in and what you have them plugged into.

Whew that sounds better. When mine crapped out that’s what happened. Everything crashed.

I noticed it too, still an issue. When the instructor asks you to set depression 200, I set it to 020, seems to be correct to get the rockets on the right trajectory at 1000 feet shallow angle. You can keep the training going by setting master arm on, he will continue the lesson.

Plug your 3 screens in to the hub side by side...as in screen 1 into USB1, screen2 into USB2 and screen 3 into USB3! I'm only talking about the WW screens null

Hope so.

Yeah I saw that. I still want the handheld because I'm fancy like that