All Activity

Thanks @Vakarian! While nothing showed null, clicking the fuse settings definitely cleared the problem. BTW for those not famlliar, to access the fuse settings click the yellow triangle in the corner. Thanks @MeanJim. I've forgotten about the FLIR calibration. Will definitely try this and will report back.

That is EXACTLY how they how they behaved when I used the 3rd generation monoculors and binoculors in the late 2010's. Full moon light is why most great battles were waged through the millenia. Enough light to see your footing and the enemy up close but not enough light for them to detect you when you didn't want them too. NVG's in full moon light had to be turned way down in intensity and even then were mostly useless which is when we broke out our IR detectors but only had a few of them.

Vakarian just answered as I was typing my reply. I'm getting it on both F-16 and F/A-18. If I just click the weapon properties (yellow arrow) and press OK it fixes it. I hope they'll fix this though so I don't have to go through all of my missions and fix each one manually. As for the new ATP, are you doing a FLIR Calibration? It clears up the image some. You will need to re-calibrate it after some time too. From page 395 of the manual:

у меня только после переключения в сетку вся индикация на всегда остается желтым ! а если переключать день-ночь то все норм день зеленый ночь желтый !

Oh really? I forgot to try the visor last night as it wasn't mentioned in the patch notes. Great news!

I've switch to Russian locale and the briefing and subtitles are in Russian yet the voice over is still in English, quite of the opposite setup I'd expected...

Fuzes got some changes in the last major update. Basically if you hover over the loadout without doing anything, you'll see that some options might have "null" value. When you open up a fuze setting you'll see that they all got reloaded. That's the "fix"

Not capable of reading and understanding in full Russian audio without English subtitles yet I guess it's the only solution for now

Опять не могу запустить ВД через коробочку. Просто не ищет компьютер. Оказалось, что нужно подсоединять коробочку в "главный" роутер (у меня это гпон терминал от провайдера), а не во второй роутер. У меня их два, второй подключен патчкордом, и работает в качестве усилителя вайфай для телефонов и ноутбука. В Пико 4 коробочка работала от второго роутера, просто в ВД было написано Local computers с возможностью подключиться к ПК.

Please consider making NPL pages fillable with mission editor and scrollable when pilot model is on. Same for wind calculator.

thread moved to the correct subsection. Please retry after the latest patch and attach a short track replay if you still have issues. thank you

So after many years of waiting and hoping we finally get to see 4th gen FF model for RED side (MiG-29A) and i believe that this is first one and last one to be introduced in DCS as of now, maybe this will change but time will tell us. So starting from "Simulation", after we got announcement that MiG-29A is around corner, we also have info that there is going to be implementation of physics for SPO-15LM and how it will detect signals based on physics, right after that we also now have R-27R/ER in Advanced model and so much more, which i like and i support you doing it, BUT biggest issue now comes with F jets as they DON'T have such Advanced models for example AIM-7 and 120s and same issue is with their RWRs as it makes no difference from FC3 F-15C in accuracy and not even close to such advanced way as SPO-15LM and starting from there we can see who is winner. So my question is. Are we going to see same Super Advanced modeling on F jets and their RWRs, Radars, Weapons and so on? And when can we expect such thing?

Adter you get the RTB ut is complete, also thete is key command to show you the score of a mission, if that is 100 then you are good. Keep in mind that it takes a second to compile all the events.

Also, what is definitely broken is the message about an incompatible loadout for loadouts that are perfectly legitimate. See the example in the screenshot. Again, I don't know whether it's a problem only on my setup or not. But this one I am absolutely certain is not a problem with how I use DCS.

I've tested again and there are two vessel indeed. It's just that the moving thick smoke nearby attracted my attention and I thought that was a submarine with defective diesel engines. (There's literally only smoke from under water without actually unit)

Thanks; another way to test this would be for your software engineers to intentionally modify the angleUp/angleDown values significantly and incorrectly, to make sure that that moves the HUD to the 'wrong' place, by the amount and direction matching the changes. Of course would need to be careful not to actually ship that change - just for testing

I put in oversized bearings to take up the space. 13x6x4mm (ODxIDxW) bearings are perfect and fit nice and snug in the cut out of the force sensor. If you are super handy or have a lathe you can cut your own bushings out of bronze or some other material.

Hi Bankler, the team just tested your mission and it seems to be working for us.

Have you watched the tutorial? In my opinion, the advantage of saving them in the DTC is that it allows you to create a route that includes the previously defined RSBNs (maximum 3). Another advantage is that it seems to me that the computer will point directly to the first of these points when starting the mission.

The Chair Mount - Collective Base Adapter it's compatible with the Sihoo chair?

The graphics inside the cockpit didn't blow me away, but all in all it looks like an exciting frame to fly.

Superb

Hello, I have booked your product, convinced that it will be an excellent module. I would like to ask you if you have planned support for Leap or, at least, if you could consider implementing it. Thank you in advance for your feedback.

at the moment, no fix is required, it is working as intended. But as mentioned I will pass on the feedback. thank you