All Activity

Not sure if this is the right forum for this but I’m considering head tracking. Currently use two hats for pov and movement but these have limitations, especially in dogfighting. so am looking at trackers. Obviously track ir is the go to as it has been around the longest but there are newer and cheaper alternatives. I think I have looked at them all, or at least most of them. but there are two things I would like to consider: prefer not to have a wearable (unless it can be head/ear mounted) as I dont use a head set just now ir seems the most accurate vs face tracking but prolonged exposure can cause eye damage so curious as to what people use on here and what they might have done to overcome the above. would prefer to buy something that comes with its own camera/receiver, I don’t use a webcam. Also don’t like vr.

1. Включение телеметрии в DCS World Перед редактированием файлов убедитесь, что в настройках DCS активирован экспорт данных: Откройте DCS World → Настройки (Options) → вкладка "Special". В разделе "Tacview" выберите: "Telemetry" → "Enabled". "Recorded Data" → "Medium" (или "Full" для детальной записи). "Remote Export" → "127.0.0.1:42674" (стандартный порт Tacview). 2. Ручная настройка файла autoexec.cfg Если Tacview продолжает "ожидать", добавьте параметры вручную: Перейдите в папку DCS: text Copy Download C:\Users\ВАШ_ПОЛЬЗОВАТЕЛЬ\Saved Games\DCS...\Config Откройте (или создайте) файл autoexec.cfg в блокноте. Вставьте эти строки: lua Copy Download tacview.enabled = true tacview.recordData = true tacview.telemetryHost = "127.0.0.1:42674" tacview.advancedTelemetry = true Сохраните файл. 3. Проверка файла options.lua Иногда настройки сбрасываются. Проверьте: В той же папке Config найдите options.lua. Убедитесь, что есть блок: lua Copy Download ["tacview"] = { ["tacviewBookmarkShortcut"] = 0, ["tacviewCompressionLevel"] = 1, ["tacviewDataRecordingEnabled"] = true, ["tacviewRemoteExportEnabled"] = true, ["tacviewRemoteExportAddress"] = "127.0.0.1:42674", }, 4. Дополнительные действия Закройте DCS и Tacview перед редактированием файлов. Запустите Tacview от имени администратора. Проверьте брандмауэр Windows: разрешите входящие подключения для Tacview (порт 42674).

Hello, I0ve been playing the corsair in the marianas wwII lately, I have no fps issues with any other modules, just with the corsair i get random fps reduction for extended periods of times, usually this happens after starting the engine (fps reduce from stable 60 to 20/25 for a couple of minutes) and randomly during the flight. every time the fps reduce they are gpu limited (rtx 3080). any idea what might be causing this?

I have for a while had issues with DCS locking up for multiple seconds every so often. It would play fine on my settings for most of the time, but then it would just stop for anywhere up to say 10 seconds, and then come back and run fine again. Not the usual micro-stutters that all my searching turned up. But anyway, I tried the "process lasso" (I'm actually using the open source Process Governor tool) and it has resolved the random lock ups! Huzzah! Except... I now get a modestly annoying issue, only in the main menu screen, whereby the mouse locks up and lags/stutters about. I can navigate just with difficulty, and once in-sim the mouse works fine. Not the biggest issue, but still annoying. Anyone else seen this / have any ideas? For whatever reason disabling the ecores seems to be the culprit.

I was meaning more for locking the view onto target after it has been acquired. You would acquire same way you would in real life, by looking. In real life you can naturally lock to the target so it would be good to have this same feature in dcs. but it brings an important point, you do lose things by being in a seat and staring at a screen in a single direction and limited fov. So having assistance to help offset that can be useful. yeah instrument approaches are easy, but I’m talking about vfr. Not all airfields have tacan or ils.

Just to highlight it again : is there any way to relocate/resize MFDs for Alt-F1 View (HUD) only. I know how to change screen(s), MFD size and location within .lua setup files in DCS World\config\MonitorSetup\. Changing the MFDs there changes the MFDs for Alt+F1 HUD view and F1 cockpit view, which does not make sense to me. I do not want the additional MFDs for normal F1 view, F2 view or any other view. I want additional MFDs for Alt+F1 HUD view only.

I don't think you have a profile for a module that hasn't released yet (maybe for mod?). However, as for the throttles, they are shared in the model, and all axle assignment options will be possible (from single ones, through controlling only the left and right engines on two axes, as with the TH Warthog).

Hello, i find out recently that some early modules like（f18 or f16 or av8 harrier) are not compatible with SRS's "radio switch work as PTT" function. I have to set the dedicated key bind in SRS to use the radio in those aircraft, and is pretty inconvenient for me Many modules are compatible (even early one like uh1) are compatible with this function. It would be good if those modules were also compatible with this function

Yes, I recently did the same. Went from 2 x gtx1070 to a rtx 3080ti. All you need to do is swap the card and update drivers. It is advised to delete the shaders folder in dcs so they can be rebuilt for the new card. I went from about 70-90fps to 120-150fps with same settings. Probably cpu and pci-e limited. I have turned the settings up and set a frame limit of 72fps (144Hz) monitor. I killed one of my 1070 cards so am considering putting the second one in for pysX, had this arrangement previously. If you are considering changing processor, check motherboard or socket compatibility first. If you need to change motherboard it needs a reinstall of windows. For me with a custom install a right pain. But like me you may also be limited in pci-e bandwidth, so cpu upgrade (if possible) may not do much at all. You can only resolve that by changing motherboard with a newer chipset. I’ve got z370 chipset, which is pci 3 and 8th gen cpu. Considering going on to 9th gen as it has same socket but I dont think it will give me much more as I will be pci limited, even though it has 2 more cores. Would have to go to pci 4 or 5 to resolve but i dont want to change motherboard. Some of the new motherboards are really expensive. Changing card usually gives a noticeable increase but you have to consider these other factors.

Всем привет, не могу подключить программу для телеметрии в реальном времени в одиночной миссии , нет соединения. Помню помогло вмешательство, в каком то файле dcs нужно было прописать строку, парни знает ли кто решение проблемы ? ------------ Hello everyone, I can't connect the program for real-time telemetry in a single mission, there is no connection. I remember the intervention helped, in some dcs file I had to write a line, guys, does anyone know the solution to the problem?

No, in the air it should fill up all the tanks anytime.

Obviously that was a typo, I meant Iran. I wasn't referring to retiring the aircraft. I was saying a lot more of these amazing aircraft could've gone to the boneyard, if Iran's F-14's didn't exist. As you said yourself, the D was light years ahead of the original after it's upgrades, plus LANTIRN. I appreciate it's overly sentimental to wish it was kept in service a little longer. You must admit the opening scene featuring the Hornets in Top Gun: Maverick was a lot less exciting than the original opening scene

Fact is that development of the CH-47 is going very slow.

If your NAS supports Docker, using Docker to install and run the DCS dedicated server is probably the solution with the least overhead and thus best performance. Running the dedicated server on Windows via a VM is very likely affected by serious performance issues.

Hi everyone, In mission editor, when AI group of fighters engage air combat, just only one fighter engages, the others fly far behind with low speed and not engage with the first one. I wonder it is the feature or bug. Is there anyone has the same issue? I attach my sample mission to use as reference test_f15c.miz

I am glad to hear, thanks. The user file library is updated accordingly

What are peoples experiences with the PSVR2 after a few months use? I am interested in this now that eye tracking is enabled and can benefit from Quad Views Foveated Rendering.

А я не думаю, что отсутствие GPS-навигации в миссиях 4 и 5 — это ошибка. Действие 4-й миссии происходит в 1988 году, 5-й — в 1993 году. Тогда ещё не было GPS-навигации. И в ядро DCS вроде бы встроен фильтр по дате миссий. Если установить дату до 1994 года (вроде бы) , то некоторых фишек современных летательных аппаратов не будет.

Thank you for stopping by, I'm happy to hear this. The F-86 is an old module, but such an amazing jet. 16 kills is pretty impressive!

Ну, например, у Razbam было все структурировано. Я некоторое время читал ветку МиГ-23. Помимо того, что в ней было много фигни, Discord не запоминал, где я остановился. Это вовсе не удобно.

null

Refueling is so lame and I don't get why ED doesn't care about it at all. They made FLOLS overlay years ago. So If the problem is realism, remove that too. Tanker crew don't give any directing messages, lights can't be seen. It is like punishing refuellers