All Activity

За 15 лет работы на заводском аэродроме, не было ни одного самолёта, который приняли бы с дефектами. (как бы нам этого не хотелось бгг ))) ). Тех.составу потом этот самолёт обслуживать, а лётчикам на нём летать. По этому замечаний всегда стараются написать по максимуму. Что бы как можно больше всего было выявлено и устранено на заводе. В частях не всегда для устранения всех дефектов есть компетенция у специалистов (да простят меня, безусловно хорошие и грамотные ребят из ТЭЧей и эскадр разных частей) и не всегда есть нужное оборудование. Кстати однажды мы устраняли замечание лётчика (нашего заводского при полёте под БТК) "не верный цвет индикации". Видимо перепутали модель табло (ТС-5). Разбирали, переставляли светофильтр.

Nice one 505, great to see some updates to ITJ (and AH-1 too). Looking forward to hopping back in as soon as RL allows!

It seems that after 2.5 years , with the MiG-29 in this patch, the problem has finally been solved. I don't have this text from now.

I use the Object Free Camera par with View up/down/left/right bindings to emulate walking in VR. I use also the Speed up/Speed Down binding to slow down the movement while "walking" around the aircraft. Sometimes i place myself inside a vehicle and go to the ramp by bus using the Object Free Camera. I do my walkaround in VR before every flight, having this feature in core DCS would be most welcome for me! Regards, F.

Gorgeous! Well done on all the effort so far - she's looking gooood! - and all the best with the road ahead. We'll be here all the way

Good stuff. Don't have Kola, so can't give it a go but well done for getting a mission up together and thanks for sharing it here!

Pretty much I feel auto mode that gives me the most problems. Usually what I do for success is Head on mode for the bvr engagement...once the target cranks, and we are under 20km, i'll switch to pursuit...that usually maintains lock. Part of what I had to get used to was the scale change between head on and pursuit, and that I need to make sure my antenna position is properly set. especially with pursuit mode, as you can easily have the dish point way off to the heavens or into the dirt, when you want it just in front of you. It's helped a bunch right now for me on contention, and I've been getting more R-27R kills

Yes... and a new entry for the NCTR table as well.

I'm on the old V1 Mongoost, with older software (since everything still runs fine) I'm not using the modifier function, so keep that in mind that my shift states in the configurator don't do anything This is my throttle setup in the Apache (which has two 3 position throttle/power levers), though Idle is idle, the AB travel isn't AB, but movement wise, they are just as equal Basic state (s0) = green 0-10% on the throttle is button 78 on Axis 1 / button 80 on Axis 2 ON, enabling blue lighting 90-100% on the throttle is button 79 on Axis 1 / button 81 on Axis 2 ON, enabling red lighting S5 is my covered switch set to show orange when Open, this is when I have the APU running (as closing the cover will switch the APU Off) That sounds like a dual key/Axis bind problem DCS sometimes has the bad habit of assigning certain action to new hardware, regardless if you already have these mapped on a different peripheral Go into keybind list and see what keys are highlighted when going into AB, check every device if the same action isn't assigned to other hardware as wel

I experienced this issue as well, with the latest available DCS World version 2.9.20.15384. However, I think I did the reporting stuff before being back at WP3/IP (maybe around ~10 nm, or so), so maybe it helps to do the reporting exactly at the WP3/IP point, as indicated by YoYo above. Anyhow, now the mission got stuck after getting the radio message from Ghost: "Weasel 31, Ghost, read you 5 by 5, send it." I'll re-try when I have chance.

Look how long it takes to accomplish “simple” things here and you want this? I agree it’s a cool idea. How long as the “improved ATC” without all this voice recognition been in the works, 8 years? Sure this is a wishlist so wish away…

I can also say that I noticed that it can happen multiple times during a single cold start, taxi and take-off event. It doesn't seem to happen once I'm in the air.

Interestingly, this minor freeze occurs even if nothing is touched on the navigation panel. Something is happening in the background, some process that resets settings and temporarily puts an additional load on the computer.

It's this issue:

I can confirm, I noticed the exact same bug on the Caucasus and Syria maps.

That’s true, I know this because I just bought it lol. But fixing VR seems to be a matter of just giving it a little attention. It seems to be a little better compared to when I trialed CA a few years ago. I can drive things around fine, but the weapon sighting isn’t adapted for 2 eyes, and is largely impossible. It wont take much to fix that type of issue for VR (just a fixed sight). Everything else is fine in VR from what I could tell. The issue is that there’s a lot of little issues that need a little attention. But the basics are there. A lot of it is just art, like vehicle interiors, and more binding schemes for vehicles (tanks vs cars) and weapons. The biggest thing I didn’t like is that vehicles don’t steer smoothly, in the sense that the is seems like the vehicles angular direction changes in tiny quick steps that get perceived in as low FPS. In VR it causes a bit of nasuea making left and right turns in a city. But, I think the concept of walking up to a mig29 has legs (sorry, pun). Or any other vehicle. At will. And I think CA would be a way ED can implement this functionality, and justify putting dev time into improving it.

I did not touch DCS for several month or maybe more than a year. Now I got a problem with installing my graphics mods (cockpits). When putting my cockpit mods folder to "C:\Users\liebe\Saved Games\DCS\Liveries\Cockpit_FW190_A-8\mymod" the mods name is not shown in Antons special options menu and I cannot set it. But when putting graphic files directly into "C:\Users\liebe\Saved Games\DCS\Liveries\Cockpit_FW190_A-8\default" the graphics for the cockpit are loading correctly. Now I found out, when putting my cockpit mod to "C:\Users\liebe\Saved Games\DCS\Liveries\Cockpit_FW190A8 \mymod" , the mods name shows up in Anton special menu settings and I can activate it, but graphics did not load into cockpit. So for now I have to go the "default" way with folder name "Cockpit_FW190_A-8\default". Is it somehow possible not to use "default" as folder name and graphics will still load into cockpit? Please, anyone can help?

Note: Visible range to Ultra!

I purchased Echo19 Spitfire sound mod. The Echo9 mods readme says to put the mods folder to "C:\Users\liebe\Saved Games\DCS\Mods\tech" .. it would look like this: "C:\Users\liebe\Saved Games\DCS\Mods\tech\ECHO19_Spitfire". But seems that sounds are not loading, I still cannot hear new sounds in cockpit. I also tried to put it into "C:\Users\liebe\Saved Games\DCS\Mods\resource\ECHO19_Spitfire" But still no new sounds. Can anybody help me to install and get sounds working? There are also new menu graphics in Echo19 folder. They are not coming up too. Please, anyone can help? Here ist the entry.lua file within "C:\Users\liebe\Saved Games\DCS\Mods\tech\ECHO19_Spitfire": "declare_plugin("Echo 19 Spitfire", { installed = true, dirName = current_mod_path, displayName = "Spitfire IX Audio Enhancement", shortName = "E19 SpitfireLFMkIX", version = "2.0", developerName = "E19 Audio Production", info = "Echo 19 Audio Proudly Presents: The Submarine Spitfire audio enhancement pack. Aiming to faithfully recreate the amazing Spitfire Mk. IX with high fidelity recordings. Credit to Eagle Dynamics for engine integration and original audio set, misc items and for DCS: World! Please report any issues on our official Discord server! Thanks for playing!", state = "installed", Skins = { { name = "Echo 19 Audio Spitfire", dir = "Media" }, }, }) plugin_done() "

That would be great: Silently communicating by wing wiggling alone is not very effective. And please add some animated pilot gestures for the pancake crowd as well...

I did not touch DCS for several month or maybe more than a year. Now I got a problem with installing my graphics mods (cockpits). When putting my cockpit mods folder to "C:\Users\liebe\Saved Games\DCS\Liveries\Cockpit_Spitfire_LFMkIX\mymod" the mods name is shown in Spitfires special options menu and I set it active, but the graphics are not loading into cockpit. I found out, when I rename "mymod" to "default" and put my graphic files directly into "C:\Users\liebe\Saved Games\DCS\Liveries\Cockpit_Spitfire_LFMkIX\default" the graphics for the cockpit are loading correctly. Is there a way to not use "default" as folder and mod name in order to get graphics loading in cockpit? Please, anyone can help?

Yes. In DCS settings. I currently have the best graphics AND perfomance ever! I'm not using DLSS. I shall try to post more of my settings later, but here are nVidia settings for now: null Pimax play settings. (I use M'bucchias Quadviews) GPU upscaling off! null null

It would be fantastic if the virtual hands in the game (both for VR controllers and Leap) were visible to other players in multiplayer mode. One player could indicate to a second player where to look or what to do. It would also be great to be able to link these hands to the pilot's arms (as in Microprose's CAP2).