Leaderboard

:thumbup::music_whistling::D

This is "acojonante" We pay for FC1, then FC2 with a little things and PAY AGAIN. We pay for BS, then BS2 with a little things and PAY AGAIN. ED, the line you are following is wrong in my view Personally, i wont pay never more, just the plane i like and nothing more. We have to support the company so they can continue, but support with new things, not the same. Unbelievable... You waste lot of time in FC2, and BS2, if you spend that time in DCS, we will have next DCS Module, and not that we still don´t know what DCS will appear after A10. Greetings EDIT: When you start DCS develop, you say each module will be compatible. BS, then A10 and they are not compatible You make people who bought BS, to pay again for a BS2? LOL

эта тема про "Борьбу с читерами" или альфа гнобит хавка? BJ я так понял летает с ником JazZ, я помню тебя на авиасибри. а почему всегда упреки в бездоказаности обвиненя против альфа? есть ли у вас доказательства против других? нету, можете ли вы доказать что вы не читеры не смотря на вашу игру без потерь/всевиденья/ракет с накрутками/пиар акцию читеров/гнобиловку на ЕД форуме. нету... вы только и можете писать какие вы классные, а все другие - отстой. а ваше главное оружие - понижение репутации на форуме, самоутверждение в интернете.

Надо будет в охотку набить им лица под пиво?

I'm running the steam version of 1.1.0.9, and have completed all the previous training missions up until the Air to Air mission. Upon loading the training, I'm walked through the steps to lock onto a target and everything works fine until the point where I have to get behind the first target. I get behind the first target and get a valid lock on. But nothing happens. The first time I tried, I figured maybe I could force the tutorial forward by destroying the first jet, so I launch my first AIM-9 at it. The target goes down, but the tutorial is still stuck. So I lock onto the next plane and destroy it too. Thinking maybe I did something wrong somewhere in the begining of the training, I reload the mission and try again. I follow everything to the letter, and keep my airspeed around 235. I get to the same point, lock onto the target, and still nothing. I try getting closer, and different paths behind the plane, but alas no dice. Was kinda hoping to be able to get to the GAU portion of the training, but it seems I'm stuck here. Time to whip out the manual.

For everyone complaining about the extra upgrade cost. It's perfectly reasonable to charge for that amount of additional work. Look at Blizzard as an example. Or any company that creates downloadable content. THEY ALL cost money. Some just add new campaigns, some just add new maps, some just add new weapons. This upgrade adds compatibility, more map area, better graphics, and a TON of tweaks. And for $20 (I'm assuming everyone complaining owns BS1) it's a steal compared to how much you play. I've paid for all ED's products, and still I've managed to blow more money in one night on coronas. ED has given me hours upon hours of entertainment. I for one, paid $14 A MONTH! for WoW, and I'll be paying monthly (at least for a while) for StarWars: Old Republic. We're trying to keep this simulation genre going, and if it's paying $20 for some great downloadable content, that's the least I can do.

Amen to that! For very little money, I get to do something I'd never be able to do in real life...fly a helicopter. The hours of fun, the hours of study. Well worth the price and a good reward for those who bring us these simulation gems. Thank you ED!!:thumbup:

What a disaster. I aint pay anything for a patch that named as BS2. ED should make something NEW instead of patching their old games with the $20 price tag. Will they continue making that kind of high-priced patches to combine all of their DCS games? So what are we paying for?

Yeee Haa.... A New beast of a machine is on the way and I cant wait to run the Black Shark 2 on it..... be still my beating heart

Well when the 5th gen DCS title is out I guess I get to look forward to "Upgrading" the previous 4 then. Considering A-10 was built upon the BS's engine it seems now honestly like lazy programming that they didn't just keep the BS implemented in the new code as they built the A-10. I mean I was lead to believe from all the posts by developers and Wags himself that this would be a patch and then it comes out and it's a $20 upgrade. It just doesn't seem right. It also doesn't seem right down the road with the next module and the next module.

It appears they have both 1.65 and 1.5v kits under that name. The KHX1600C9D3P1K2/8G part is a 2-dimm kit (two 4GB sticks) with 1.5v CL9 and should definitely work. 1.65v kits might also work, but Intel doesn't like it.

Black Shark 2 released This was kept very quiet, or have I just not been looking in the right places? Compatible with DCS A10-C, that's a whole lotta fun!! http://www.digitalcombatsimulator.com/index.php?end_pos=135&scr=products&lang=en http://forums.eagle.ru/showthread.php?p=1317706#post1317706 I'm just too busy to take it on just now (redundancy, sorting out my life!), but it is top of my ToDo list as soon as I've sorted out some priorities. http://forums.eagle.ru/showthread.php?t=80907

I'd definitely try the old PSU, especially if its a good brand, 620W is plenty for what you have in mind. Saving money: motherboard and CPU. A 2500K is not that much slower, yet costs considerably less and good Z68 motherboards can be bought for <100€ (ASRock Z68 Pro for example). Waiting a few more months would also be a viable option, as Ivy Bridge and new GPUs are just around the corner. @EtherealN: Sandy Bridge = DDR3, DDR2 won't work.

Sorry TulsA-10, I cancelled the blur that is visible in my test-vid, because its too unrealistic and it is very irritating when you want to use the MFCDs or click in the cockpit. It really should look at last like this to make sense at all: But this cant be done with the tools I'm using... This can only be done if you are able to modify direly the DirectX post-processing layer with adding a z-detection blur. (But you should be able to test it on a 1920 Horizontal - you just have to tweak your Focus.png of DCS to fit my overlay.) So I followed the advise from Igormik and tweaked the light sensitive fading a little more (I tested it with a flash-light with a green filter -holding it in front of my eyes... :) ) So if there are not more suggestions I would work on a upload including all common resolution pre-sets to be ready on Saturday. ...and also reworked the autohotkey script - so it will be much more reliable. Here is the preview of the final (?) appearance : Please watch in full-screen and 720p to be able to see all details and get a better contrast. The first 15seconds I only show the overlay on a white background. Please let me know if someone has a sample-sound of switching them on/off. So I could tweak the sound . I would be glad to hear your opinion. (I have to say the it feels very good and I will not fly without it any more in night times.) Btw - I have to keep the lower quarter of the screen-area clear . If I wouldn't - you wouldn't be able to click into the cockpit at all when the NVG is visible. I think I found a fairly well compromise. Can't measure any difference at all. - but I fixed my FPS at 30 anyway...

С наземкой в Крыму. Ставится после или вместе с "Krym in LoFC-2A". Krym in LoFC-2b.rar.html Читайте Readme...

Oh deer... :cry:

Sorry, this experiment in many flavors was already done a year ago, I even took it up to the next level and tried a VMware ESX-cloud. No chance at the moment.

Не просто добавил, а забыл вставить. Убавил лишнее. В .cdds было много дублирующих файлов. Пока извлёк, пока почистил, впихнул обратно... Работа муторная... Вот и появились не нужные. А разницы действительно никакой... -- Сейчас сплошной пустырь -- Сейчас брошу. Только на Кавказе сокращается наземка. В Батуми и далее её нет вообще. Виды F11, за, по моему, Гудаутой, Крыма больше не показывают. (Файлы .scn !!! не склеиваются. Похоже только в 3DS MAX...) -- береговой линии не хватает -- Пока ищу как её запустить.(Прибой вроде в эффектах) Ну и в ридми у меня написано: - "Версия пробная"!!! Пробуйте! Кто, что подскажет буду рад! Сейчас меня больше всего бесит то, что редактор в упор не видит "Саки". В игре то он есть! На МФД светится, автопилот на него выводит и сажает. Оставлял рядом с ним самоль без горючки - садится!!! Ну чего не хватает??? Ищу пока.....

Один файл добавил, а несколько убавил... В чем разница, не заметил. А привязать текстуры поверхности не пробовал? Сейчас сплошной пустырь, и береговой линии не хватает.

two weeks :D

some new triggers needed I hope that we get a COALITION_LAND_UNIT_IN_ZONE and COALITION_AIRUNIT_IN_ZONE-triggers. That way flying around would not break triggered landwar events and vice versa.

Практического значения не имеет , на все вопросы нет .

Oh great!!! I've been in a cave the last two months, sorry. Soooo... no anouncement so far I'm afraid, right? When is the next deadline? Maybe when Nevada is released? Regards!

Может вам от Града притаскивали.Наземные они потяжелее,а авиационные полегче.Военные не сказали какие именно НАР притаскивали?

Ты вот вроде за борьбу с читтерством, но одновременно пишешь и нагоняешь пессиместические настроения что все, кирдык, мы не пройдем То есть будем бороться, но все равно не победим и давайте заранее пойдем возложим цветы к памятнику павшим в борьбе с читтерами :) Я лично уверен что система аккаунтов может дать больше порядка, чем сейчас. Шаги вперед делать необходимо, потому что с каждым шагом читтеров будет все меньше. ЛО не умрет пока не будет достойных конкурентов, значит будет либо ЛО3 "Дюралевое небо" или еще более горячие скалы, либо отберут права у юбисофта и соединят все вместе, либо сделают патч совместимости для ЛО-2 чтобы летать с акулой и кабаном:) Да и в сущности, особо много делать не надо, можно наваять прогу типа гиперлобби, привязать ее к той же базе учетных записей на http://www.digitalcombatsimulator.com/ и пихнуть сей скрипт в игру :)

Завязывал бы ты уже Ваньку валять:lol:. Эту ерунду на своем форуме пиши, может там кто и поверит:megalol:

Чипсет какой? А тебе вообще зачем? Если просто посмотреть, то разницы ты абсолютно не заметишь. Единственный плюс, если порты выведены наружу - тогда можно подключать находу, как флэшки.

девочки, только не ссорьтесь!

Эта песня хороша, начинай с начала. Конечно вам нужны заверенные нотариусом данные. Но Делл ошибся всего один раз зашел на Акадо со своим ником. Даже не зашел, а попытался загрузиться. Но данные в статистику прописались прописались, что позволило сопоставить его с хулиганом). Будет время - сделаю себе подпись со скрином статы внизу))))

The mortars will fire twenty-five rounds in about 3 1/2 minutes (about one every nine seconds). When those twenty-five rounds are expended, that's it...the tubes are useless.

хок уже запарил, я вот не понимаю что ты все под одну шарманку, сам кричит мол последний пост и жую попкорн, то опять "я же говорил, вот они исчадье ада". При чем нет ни каких аргументов, тольок свои личные домыслы. Что у тебя за личные счеты, все твои посты не по теме, создай свою, на подобе "Альфа - читаки" и там пихай свою ересть. У тебя есть хоть одна мысль по теме? нет? ну тогда лесом.

Wow Gadroc that turned out awesome! One hell of a machine to own!

Might want to try one of these other desktop screen recorders: http://www.webresourcesdepot.com/10-free-screen-recording-softwares-for-creating-attractive-screencasts/

For what its worth, I have the Thrustmaster Cougar, and I use Vipers profile. Trim has never been a struggle,, its smooth as silk with that profile,, little nudge and I get tad of trim,, longer hold ads just enough,, its very proportional and probably the only thing I havnt struggled with

Ahh, that's probably why this mission has never worked for me! :) I'll try it again via keyboard.

Так чего мы тут дискутируем, если в А-10 уже есть система аккаунтов? Которая, к тому же , показала себя вполне работоспособной. Я лично за организацию такой же системы для ЛО2, конечно, от всех бед она не избавит, но, я думаю, он-лайн станет намного цивилизованнее.

Or use JDAMS on known targets, as GPS does not care about weather (as soon as it does, you don't care about your targets anymore...). Edit: Damn xD Supersheep

Not at home right now, so forgive, but... I found that you must use the keyboard to ativate whatever key command it is asking you to press (disengage autopilot ?? ) prior to locking up the target... You cannot use the HOTAS, or whatever other option you have... Sorry I can't be more specific... As I said, not at home, and haven't done this one for a while... ;)

Glad to help! :D Froglips - I can't speak for Gadroc, but I have a CNC and a laser. While the CNC will cut out the panels from acrylic fine and faster than the laser, IMO it doesn't compare to the laser for engraving the panels. The CNC can do the engraving, but it takes more precise setup where the laser is more forgiving. For example, if you only want to engrave to a depth of .005", the panel will need to be almost perfectly perpendicular to the Z plane or you'll end up with varying depths. You really wouldn't have to worry about that on the laser. It can be done though, just takes more patience and tweaking to get good results on the CNC (again, just from my experience).

Вспоминая ваших троянов, чо-то как-то неохото с вами связываться.

I agree with you 100%. I've read to many times in the past that PC users just don't buy Sims and when they do, the sales are low. When I look at the products that are being released (like the new JANES title), it's no wonder that Sims are not being bought. They make what they think we want. But when a company like this one actually takes the time to do a real Sim, I'm both shocked and impressed. Seems JANES thinks PC Simmers like the "Arcade" junk. This company knows we don't and that's because we let them know what we like. As for a "Wish list" of add-ons, I'd like a single player career mode that allows the pilot to age, work up the ranks and earn both Ribbons and Medals based on career performance as well as mission performance and a screen showing the pilot in full dress uniform with decorations, BUT, that's just me :pilotfly:

Hi Spike. The mission should be working correctly, so you probably missed one of the triggers along the way. My guess it maybe it had to do with turning off the Autopilot, which is something the mission looks for around the time you need to line up behind the first target. We can diagnose better if you attach a track of your flight so we can see what happened.

Тебе проще, они твои, рассейские, а я по сравнению с вами заграница :)

I have had a heck of a time trying to trim the A-10 as well. I have a CH Products Fighterstick USB, and whenever I use one click of my trim switch, I get pitch changes of 5 degrees or more sometimes. I have done everything I can think of to calibrate my Fighterstick both in and out of the sim, but no luck. I have flown a number of real aircraft including multi-engine jets and none of them behave this way, of course. So, I am guessing that my hardware is faulty. The Fighterstick is a number of years old.

The faster you get, the more lift wants to pitch your nose up if you dont react. Trimming might be such an action. That is what it's for. The Autopilot doesn't do anything else. If you reduce speed (while climbing or reducing throttle), lift gets lost and your nose heads down. That's the way it works.

Здравствуйте! Вопрос к разработчикам. Если отстрелят стойку ПВД (со всем содержимым), влияет ли это на каналы автопилота?

Админы 104-го тоже в курсе происходящего и будут признательны инфе о подозрениях и методах их отфильтровывания. Если можно мне в ПМ.

Looking forward to your progress. If you recommend this laser overall I might have to start thinking about a purchase...hmm I may need to rethink my process of laser engraving the panels. Right now I engrave through a mask and then spray white to give the letters good contrast. But this method definitely impacts back lighting for the worse. It's also messy, the laser creates a lot of paint dust that ends up sticking to the engravings, so I do a second pass to clear out some of the dust but it still leaves a lot behind and it's very hard to clean out. If you find a better way, please let me know!

great news, i've asked your questions to the owner, answer soon, but looks like you did it !