Search the Community

Всем привет. Мы RTFC - разработчики игровых устройств для авиасимуляторов. Сегодня хотим рассказать вам о нашем новом устройстве панель - Navigator. Об устройстве: панель Navigator обладает множеством элементов управления, обеспечивающих высокую скорость взаимодействия с летательным аппаратом. Устройство поможет сократить время введения навигационных координат, курсов, радиочастот, таймеров и прочей цифровой информации. Помимо кнопочной клавиатуры в устройстве уделено особое внимание контролю радиостанций. Благодаря энкодерам и хаткам можно удобно пролистывать встроенные игровые радиокоманды и отдельно управлять радиостанциями самолета. В дизайне устройства учитывались также пожелания любителей полетов в VR очках и шлемах. На цифровой клавиатуре на кнопках «5» и «0» добавлены горизонтальные насечки для слепого ввода, между правой и левой колонкой дополнительных кнопок L1 и R1 добавлены вертикальные разделители. Хатки разнесены на разные стороны лицевой части панели во избежание случайного нажатия, колпачки хаток разные. Энкодеры разделены при помощи размещения на разной высоте так же для тактильного восприятия. Установка панели: разместить устройство в своем летном месте можно как самостоятельно на столе среди других устройств для управления полетом, так и сформировать комплексное решение для управления, установив панель между двумя MFD - Bullseye от RTFC. Панель устанавливается на подставку с регулировкой угла наклона, ножки подставки прорезинены, основание подставки утяжелено, чтобы панель не скользила по столу и не опрокидывалась, кабель, подключенный к устройству, вложен в направляющую для провода. Комплектация: в коробке вы найдете все необходимое для полета. панель Navigator – x1 Кабель подключения USB - 1.5 метра – x1 регулируемая подставка – x1 Комплект крепежа – х1 Техническая информация: корпус панели выполнен методом 3д печати из ABS пластика с дальнейшей постобработкой. Тактильные элементы изготовлены на фотополимерном принтере. Электронные компоненты ALPS EOM высокого качества, программное обеспечение собственной разработки, печатные платы собственной разработки, монохромная зеленая подсветка «Emerald Green», 5 режимов яркости. Для оформления предзаказа: Вступайте в нашу группу или напишите нам на Contact@rtfc.pro Все актуальные цены и информация о доставке публикуются в группе. Если хотите нас поддержать подписывайтесь на наш Бусти.

Super Hornet inspired UFC Control app for the F\A-18C for DCS World. I've been working on this app for a while, since UFCs are difficult to build i decided to make this app and use it with a 8 inch fire HD tablet in my cockpit setup. I added some extra features like the ability to control some of the panels and i currently working on adding a Data Cartridge feature to input way points faster. I tested everything i could and everything seems to be working so far. I would really appreciate if you guys can report bugs back to me. I'm also open for suggestions on extra features to add, etc. For now the APP is only available for Android but I'm in the process of submitting the app to the Apple App Store. Let me Know what you think! Hope you guys Enjoy The APP! INSTRUCTIONS: Video Tutorial: Coming Soon 1- Get The App: Android https://play.google.com/store/apps/details?id=com.embarcadero.HornetUFCDCS iOS https://apps.apple.com/us/app/hornet-ufc-dcs/id1604694496#?platform=ipad 2- Download the lastest release of HornetUFCDCSAppServer from the GitHub Repository https://github.com/AlphaMikeSimulation/HornetUFCDCS/releases 3- Unzip The Content somewhere in your hard drive( Desktop Or C Drive For Example) 4- Copy the DCS-BIOS Folder yo your Scripts folder ( C:\Users\USERNAME\Saved Games\DCS.openbeta\Scripts) 5- Edit your export.lua file and add this to the end of the file: dofile(lfs.writedir()..[[Scripts\DCS-BIOS\BIOS.lua]]) 6- Open the HornetUFCDCSAppServer.exe and go to settings and inpiut the IP Address of the Tablet or Phone that you are using for the HORNET UFC DCS App 7- Click in Shutdown Server and Start the server again for the new IP to take effect 8- Open HORNET UFC DCS In your phone or tablet and go to settings, input the IP of the computer that you are using for running DCS World 9- Open DCS World and wait for HornetUFCDCSAppServer status to change status from DCS Not Running To Waiting for DCS... 10- Open any Mission and wait for the HornetUFCDCSAppServer status to change to Connected 11- Now you can control the UFC from your phone or tablet, ENJOY!

Hi, When doing the training for bombs I encountered the issue that when I want to set de amount - distance between bombs the UFC doesn't show anything (stays black) am I missing something?

* Tested in the Caucasus Map, SP mode * The backup AA/AG mode selection logic through the DED and UFC appears to be inverted. According both to the Viper early access manual and to the -34, pressing M-SEL on the DED MODE page should activate the displayed mode (e.g. pressing M-SEL when AA mode is displayed should make the jet enter AA mode). Currently this behavior appears to be inverted, both on the ground and in the air. As you can see from the track, pressing M-SEL with AA mode displayed brings up the AG mode and vice versa. DED MODE Logic Inverted.trk

I used to fly with P33tr's DCS UFC and DCS Nav apps, and loved them immensely. But on windows 11 stable and after the recent DCS updates, the apps don't work anymore: the COMM manu does work, but all data that goes from the PC to the tablet is dead. it used to work fine, I have all ports etc. open, firewall rules in & out, correct IP addresses in the config. But nothing works. anyone else suffering this or has a smart workaround? Config.lua

After updating to the latest software (1.8.18), my UFC/HUD controls are not recognized in SimApp Pro and the exports from the game are not working on the physical MIP UFC controller. The game recognizes the controller is there and functions correctly with all of the buttons/knobs, etc., so it is being detected by Windows and DCS, just not in the SAP software. I tried doing the repair lua function and that did not solve the problem. I tried unplugging the USB-C cable to the controller and plugging it back in, but that did not work either. I have the ST throttle, SL joystick, CR and TO panels, and the 3 MFDs connected, and they are all recognized and working correctly in SAP. Anyone else seeing this or know of a way to roll back to the previous version of the SAP software to troubleshoot?

Pressing the SPC button on the UFC inserts 2 spaces, one for pressing and one when releasing the button. Happens when clicking on it with the mouse too The CDU SPC works as expected, inserting only a single space for one press+release

Hi, I designed another version of UFC PCB. I also designed segmented displays. PCB with assembled displays will arive after this weekend and I will test it. Live 3D preview is here - https://a360.co/39aHAa4

This is my idea, but not finished yet. Basic parts: 2x Thrustmaster MFD Cougar 2x ZGYNK 8' 2x DP to HDMI conversion cable 1,5m 1x USB hub D-LINK H7 1x Lenovo TAB 3 8' + DCS UFC apk 1x Xinmotek XM-08 (button bar) 10x Button TS-12 (green light) Button bar 3D print https://www.thingiverse.com/thing:4755643 1x Lenovo TAB 3 8' + DCS UFC apk 4x USB extension cable 30cm (wireless headset, wireless mouse, PS2cam for TrackIR, free) 1x USB to Micro USB extension cable 20cm (Xinmotek XM-08) DDI panel - Plán.pdf DDI panel - Díly 7_2MM - TAB 8.pdf FA-18 BTN BAR PCB.pdf

Hi, I design an UFC for the f-15E from 3d printing. you can porches all models from here: https://www.cgtrader.com/3d-print-models/hobby-diy/other/diy-f-15e-ufc-replica-for-sims The design includes 6.5" TFT screen, and all buttons, encoders and potentiometers needed for it Here are some pictures:

Is there any way to select a waypoint on CDU/UFC? 'Cuz everytime I have to use my DMS Forward/AFT buttons when HUD is SOI. It changes one by one. I don't wanna change one by one. I wanna select Waypoint 18 on UFC and then change it as my steerpoint. Is there a solution?

Hello fellow Pilots! As @AlphaJuliet wrote in one of his Threads there has been a known Bug - Am I the only one not beeing able to edit existing waypoints or create new ones by LAT / LONG coordinates? My standard procedure (not working anymore): - EHSD-->DATA page - WYPT active - choose waypoint or create new one - edit POS by entering LAT/LONG (same way as in INS alignment) - press ENT - same for ELEV - (check setting again) - exit Data page To be honest, I have not been sitting in the Harrier for a few months. Is there a new procedure now? But the entered coordinates do not save anymore. Therefore I cannot fly my CAS... On Reddit you can read a lot of postings that this bug has still not been fixed: Tried a few solutions such as creating a MK1 or creating new TOO first and editing coordinates afterwards. --> Nothing seems to work for me! Your help will be apprecaited Thanks & best regards, LonestarR

This is my F-15E UFC — now available on GitHub! https://github.com/MilKris666 Video: Razbam at Tokyo Game Show 2024 — using my UFC!