Nahemoth Posted January 27, 2022 Posted January 27, 2022 Hi, Does exist any keybind for changing between AUTO and MAN for TWS radar mode? Thanks!
Exorcet Posted January 27, 2022 Posted January 27, 2022 DCS mimics the real life aircraft controls as much as possible. The AUTO/MAN swap is done through the display that the radar is on. You'd have to map a key to the specific MFD button that corresponds to the radar mode. There is no direct button to switch. There maybe a HOTAS command for it, but I can't remember now. Awaiting: DCS F-15C Win 10 i5-9600KF 4.6 GHz 64 GB RAM RTX2080Ti 11GB -- Win 7 64 i5-6600K 3.6 GHz 32 GB RAM GTX970 4GB -- A-10C, F-5E, Su-27, F-15C, F-14B, F-16C missions in User Files
zildac Posted January 27, 2022 Posted January 27, 2022 (edited) 4 hours ago, Nahemoth said: Hi, Does exist any keybind for changing between AUTO and MAN for TWS radar mode? Thanks! Hi, you can map "Right MDI PB13" to switch between AUTO and MAN (once in TWS mode). I also have "Right MDI PB5" mapped to switch between RWS and TWS mode...obviously this assumes you have your attack radar on the right MFD. If not then obviously swap right for left Edited January 27, 2022 by zildac 1 14900KS | Maximus Hero Z690 | ASUS 4090 TUF OC | 64GB DDR5 6600 | DCS on 2TB NVMe | WarBRD+Warthog Stick | CM3 | TM TPR's | Varjo Aero
Nahemoth Posted January 27, 2022 Author Posted January 27, 2022 hace 35 minutos, zildac dijo: Hi, you can map "Right MDI PB13" to switch between AUTO and MAN (once in TWS mode). I also have "Right MDI PB5" mapped to switch between RWS and TWS mode...obviously this assumes you have your attack radar on the right MFD. If not then obviously swap right for left Thank you for the advise, very useful. 1
Jak525 Posted January 27, 2022 Posted January 27, 2022 You can cursor over the MAN/AUTO button and TDC depress. If everything was implemented correctly there would be pretty much zero reason to use MAN. 1 1
Foka Posted January 28, 2022 Posted January 28, 2022 4 hours ago, Jak525 said: If everything was implemented correctly there would be pretty much zero reason to use MAN. Unfortunately in DCS in AUTO you can't change radar elevation.
Tholozor Posted January 28, 2022 Posted January 28, 2022 48 minutes ago, Foka said: Unfortunately in DCS in AUTO you can't change radar elevation. What he means is that offboard tracks should be able to be designated as L&S without ownship radar contribution ('NO RDR' cue on TD box), so elevation control would be unnecessary. 1 REAPER 51 | Tholozor VFA-136 (c.2007): https://www.digitalcombatsimulator.com/en/files/3305981/ Arleigh Burke Destroyer Pack (2020): https://www.digitalcombatsimulator.com/en/files/3313752/
Harker Posted January 28, 2022 Posted January 28, 2022 And also AUTO should be closer to TWS AUTO in the F-14, where the azimuth and elevation bars are automatically adjusted to maintain as many trackfiles as possible, with the limits prioritizing the L&S, DT2 and then stepping down through the ranks. 4 The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro
norman99 Posted January 28, 2022 Posted January 28, 2022 So not simply centring on the L&S? That’s interesting, and significantly more useful.
Harker Posted January 28, 2022 Posted January 28, 2022 (edited) 2 hours ago, norman99 said: So not simply centring on the L&S? That’s interesting, and significantly more useful. Yes, TWS AUTO can use any combination of azimuth, elevation and elevation bars settings it sees fit (even things like 3B, which are not accessible manually) in order to maintain as many MSI trackfiles as possible. The scan pattern is adjusted based on a set of priorities, with the highest being the L&S, then DT2, then Rank 1, then Rank 2 etc (designating a trackfile does not change its rank, like it currently happens in DCS). And obviously, it's also based around a minimum trackfile update rate. Do keep in mind that MSI trackfiles also include non-radar trackfiles (the L&S can also be a non-radar trackfile), so when initiating TWS AUTO, it will adjust to detect these as well, if applicable. So, if we get a proper implementation of MSI and TWS AUTO, it'll essentially be a system that allows for significantly hands-free operation, because it will adjust the scan pattern by itself, based on both radar, datalink and other MSI data. It'll always try to keep the most important targets within the scan pattern, so you won't have to make azimuth and elevation adjustments yourself. Fingers crossed we actually get it. Edited January 28, 2022 by Harker 8 The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro
Hobel Posted January 30, 2022 Posted January 30, 2022 (edited) @Exorcet In dcs there is no hotas command so far I once heard that rl f18 pilots can adjust their hotas themselves up to a certain point. Is there something to it? Edited January 30, 2022 by Hobel
Hulkbust44 Posted January 30, 2022 Posted January 30, 2022 7 hours ago, Hobel said: @Exorcet In dcs there is no hotas command so far I once heard that rl f18 pilots can adjust their hotas themselves up to a certain point. Is there something to it? Use the TDC to select the option...
Hobel Posted January 30, 2022 Posted January 30, 2022 15 minutes ago, Hulkbust44 said: Use the TDC to select the option... I know that this is possible, but I will avoid it as much as possible. You don't want to waste time in a BVR/ACM and slewen somewhere with the cursor. I put the MFD button on the hotas, everything else costs too much time. 1
Hulkbust44 Posted January 30, 2022 Posted January 30, 2022 I know that this is possible, but I will avoid it as much as possible. You don't want to waste time in a BVR/ACM and slewen somewhere with the cursor. I put the MFD button on the hotas, everything else costs too much time. It would be fine if ED fixed the slew rate...That and AUTO should be be selected when a AMRAAM is launched.I just don't worry about most of the time and just work the radar. Pretty simple when using the AZ/EL as one press will adjust azimuth and elevation.
GrEaSeLiTeNiN Posted January 31, 2022 Posted January 31, 2022 (edited) On 1/28/2022 at 5:05 AM, zildac said: Hi, you can map "Right MDI PB13" to switch between AUTO and MAN (once in TWS mode). I also have "Right MDI PB5" mapped to switch between RWS and TWS mode...obviously this assumes you have your attack radar on the right MFD. If not then obviously swap right for left I did the same, plus RSET and Azimuth buttons, RMFD only, all on a 4-way HAT in modifier state Edited January 31, 2022 by GrEaSeLiTeNiN 3 AMD Ryzen 5 5600X | Gigabyte RTX 3070 Gaming OC 8GB | 64GB G.SKILL TRIDENT Z4 neo DDR4 3600Mhz | Asus B550 TUF Plus Gaming | 2TB Aorus Gen4 TM Warthog HOTAS | TrackIR 5 | Windows 10 Home x64 | My HOTAS Profiles
wilbur81 Posted March 7, 2022 Posted March 7, 2022 On 1/28/2022 at 10:50 AM, Harker said: Yes, TWS AUTO can use any combination of azimuth, elevation and elevation bars settings it sees fit (even things like 3B, which are not accessible manually) in order to maintain as many MSI trackfiles as possible. The scan pattern is adjusted based on a set of priorities, with the highest being the L&S, then DT2, then Rank 1, then Rank 2 etc (designating a trackfile does not change its rank, like it currently happens in DCS). And obviously, it's also based around a minimum trackfile update rate. Do keep in mind that MSI trackfiles also include non-radar trackfiles (the L&S can also be a non-radar trackfile), so when initiating TWS AUTO, it will adjust to detect these as well, if applicable. So, if we get a proper implementation of MSI and TWS AUTO, it'll essentially be a system that allows for significantly hands-free operation, because it will adjust the scan pattern by itself, based on both radar, datalink and other MSI data. It'll always try to keep the most important targets within the scan pattern, so you won't have to make azimuth and elevation adjustments yourself. Fingers crossed we actually get it. Indeed. i7 8700K @ Stock - Win10 64 - 32 RAM - RTX 3080 12gb OC - 55 inch 4k Display
Willie Nelson Posted March 8, 2022 Posted March 8, 2022 Can someone clarify what benefit there is to RWS? I have been wondering if the only use is simply for AIM7 missiles? For everything else it would appear that TWS is the way to go... i7700k OC to 4.8GHz with Noctua NH-U14S (fan) with AORUS RTX2080ti 11GB Waterforce. 32GDDR, Warthog HOTAS and Saitek rudders. HP Reverb.
MARLAN_ Posted March 8, 2022 Posted March 8, 2022 PB10 in STT will enter TWS AUTO, sadly, DCS currently clears all memory when you exit STT, hopefully ED will fix it sometime... If all of the bugs and missing major features of the F/A-18C were fixed/implemented, A/A would be much much more fluid to navigate. 35 minutes ago, Willie Nelson said: Can someone clarify what benefit there is to RWS? I have been wondering if the only use is simply for AIM7 missiles? For everything else it would appear that TWS is the way to go... You get a wide search volume (140 degrees) as opposed to the more narrow one in TWS, and if it was implemented correctly, depressing on the RDR ATTK in RWS would center the scan volume. Typically RWS is used during the sanitization (pre-commit) phase of an intercept. You would switch to TWS during MELD & SORT. 2 Virtual CVW-8 - The mission of Virtual Carrier Air Wing EIGHT is to provide its members with an organization committed to presenting an authentic representation of U.S. Navy Carrier Air Wing operations in training and combat environments based on the real world experience of its real fighter pilots, air intercept controllers, airbosses, and many others.
Tholozor Posted March 8, 2022 Posted March 8, 2022 (edited) AIM-7 has nothing to do with RWS vs. TWS, as the missile requires STT in order to track (aside from HOJ). RWS permits larger scan volumes for general search, as TWS has azimuth/bar-scan limits. EDIT: Sniped, nice shot @MARLAN_ Edited March 8, 2022 by Tholozor 1 REAPER 51 | Tholozor VFA-136 (c.2007): https://www.digitalcombatsimulator.com/en/files/3305981/ Arleigh Burke Destroyer Pack (2020): https://www.digitalcombatsimulator.com/en/files/3313752/
MARLAN_ Posted March 8, 2022 Posted March 8, 2022 1 minute ago, Tholozor said: AIM-7 has nothing to do with RWS vs. TWS, as the missile requires STT in order to track (aside from HOJ). RWS permits larger scan volumes for general search, as TWS has azimuth/bar-scan limits. EDIT: Sniped, nice shot @MARLAN_ 1 Virtual CVW-8 - The mission of Virtual Carrier Air Wing EIGHT is to provide its members with an organization committed to presenting an authentic representation of U.S. Navy Carrier Air Wing operations in training and combat environments based on the real world experience of its real fighter pilots, air intercept controllers, airbosses, and many others.
Willie Nelson Posted March 8, 2022 Posted March 8, 2022 Thanks for that guys. i7700k OC to 4.8GHz with Noctua NH-U14S (fan) with AORUS RTX2080ti 11GB Waterforce. 32GDDR, Warthog HOTAS and Saitek rudders. HP Reverb.
VDV Posted March 8, 2022 Posted March 8, 2022 A side question: is Hornet's TWS better than Viper one?
wilbur81 Posted March 8, 2022 Posted March 8, 2022 9 hours ago, MARLAN_ said: PB10 in STT will enter TWS AUTO, sadly, DCS currently clears all memory when you exit STT, hopefully ED will fix it sometime... If all of the bugs and missing major features of the F/A-18C were fixed/implemented, A/A would be much much more fluid to navigate. Indeed. I think that it'd be cool/helpful if the mods would create a sticky Hornet Radar bug tracker thread. I think the radar in any modern fighter is, aside from the flight model itself, THE heart of the aircraft and it is probably the most complex and sensitive set of systems to simulate in DCS. 1 i7 8700K @ Stock - Win10 64 - 32 RAM - RTX 3080 12gb OC - 55 inch 4k Display
Hulkbust44 Posted March 8, 2022 Posted March 8, 2022 1 hour ago, VDV said: A side question: is Hornet's TWS better than Viper one? Very much so. The Hornet has longer range and greater azumoth, I believe it tracks more targets, and has much better logic overall. No need to manually create system trackifles or whatever. 18 is slightly better as of now in DCS, but it should be no competition in A/A really.
Recommended Posts