JOSGEM72 Posted October 9, 2021 Posted October 9, 2021 Hello, is there a way to align the sights in multimonitor? the designation reticle is not centered in the main screen
ED Team BIGNEWY Posted October 11, 2021 ED Team Posted October 11, 2021 Please attach your monitor.lua for this setup we will have the team take a look. Please try using GU_MAIN_VIEWPORT = Viewports.Center thanks Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, PIMAX Crystal
JOSGEM72 Posted October 11, 2021 Author Posted October 11, 2021 Hello, with this command in the monitor .lua all works ok. thanks
SAEVONIX Posted November 1, 2022 Posted November 1, 2022 (edited) I have two monitors vertically and it is impossible for me to align the petrovich sight. It appears in the middle of the two monitors. main monitor resolution 2560x1080 secondary monitor resolution 1920x1080. in other helicopters like the apache there is no problem, but with the hindu the only way to play is putting only 1 monitor as the game form Edited November 2, 2022 by SAEVONIX adjuntar imagen
Freejack Posted December 24, 2022 Posted December 24, 2022 (edited) Any adviсe for those who are not using multimonitors or VR? UPD. Using DSR. My native monitor resolution is 1440p. So when DCS is set to 4K this is happening. Returning DCS to 1440 makes it centered. Found a way to fix this by editing HelperAI_page_common.lua. But modifiing cockpit scripts breaks integrity check... Dead end... Edited December 25, 2022 by Freejack 1 Ryzen 5700x3d, 64 GB, rtx 4080, win10
Schlomo1933 Posted January 3, 2023 Posted January 3, 2023 (edited) For me it looks like your view is tilted to the right. Have u tried to turn your view to the left ? Maybe that helps Edited January 3, 2023 by Schlomo1933
KoN Posted February 28, 2023 Posted February 28, 2023 In VR petro Aim sight is way too low can this be moved . Too center of eye line . Gigabyte - X570UD ~ Ryzen - 5600X @ 4.7 - RTX-4070 SUPER - XPG 32:GB @ 3200 - VKB - Gunfighter 4 - STECs - Throttle - Crosswinds Rudders - Trackir 5 . I'm a dot . Pico Nero 3 link VR . @ 4k Win 11 Pro 64Bit . No longer Supporting DCS .
BlitzPuppet Posted March 10, 2023 Posted March 10, 2023 Noticed today after the latest open betal patch was installed, when you turn on the AI aim assist (cntrl-v) the crosshairs will appear offset to the center of the screen. Designation still occurs at the center of the screen, but both the AI and the target list ui appear offset. Specs: Resolution 3440x1440 UI/Text scale set at 1.5X
Rikk Posted March 11, 2023 Posted March 11, 2023 Same resolution and issue here, really annoying as I'm just learning the module Tried Beta-mt and Beta, same issue, switch to stable and it's fine so def the patch.
fragal Posted March 11, 2023 Posted March 11, 2023 Try changing your gui scaling back to 1. Fixed the issue for me.
Simba Posted March 12, 2023 Posted March 12, 2023 same problem here Resolution: 3.840 x 2.160 GUI scaling: 2 and if I change the gui back to 1 the crosshair is back in center but now the menu is way to small for me please fix it
JamesRothwell Posted March 12, 2023 Posted March 12, 2023 Resolution: 3.840 x 2.160 GUI scaling: 1.5 Yes, same issue. Only started since this patch. Handy to note GUI scaling to 1 is a temporary fix but not ideal.
randomTOTEN Posted March 14, 2023 Posted March 14, 2023 https://forum.dcs.world/topic/320943-ui-ai-assist-crosshairs-are-offset/ https://forum.dcs.world/topic/321415-petrovich-crossairs-off-center/ @NineLine any way these 2 threads could be merged? They appear to be the identical bug. Thanks.
Padonis Posted March 17, 2023 Posted March 17, 2023 Today's patch unfortunately did not fix the problem.
splash Posted March 17, 2023 Posted March 17, 2023 Same problem here, fixed with GUI scale=1, but GUI is too small in my 4k screen.
Rikk Posted April 5, 2023 Posted April 5, 2023 Can we have an idea when this will be fixed please, if I have GUI at 1 it fixes it but I can't see any of the text, if I have it at 1.5 as usual I can't use the AI
Rikk Posted April 13, 2023 Posted April 13, 2023 No fix for this in the patch? Come on we can't even play the module if we have the GUI set above 1. Would be nice to just get a reply
Rikk Posted April 14, 2023 Posted April 14, 2023 (edited) Opened up a support ticket, not terribly happy with the answer. null Edited April 14, 2023 by Rikk
TooManyTims Posted April 18, 2023 Posted April 18, 2023 (edited) Summary I first thought that Petrovtich was not even searching at all but then by luck discovered that he was, just with a huge offset from where I had commanded him to do so. In image belo you can see the "Designation Reticle" is way off centre and this screen shot is the instant after I've pressed the search command. The "Designation Reticle" is up in the sky and he is searching down in the bottom right (as seen through the hud). This is 100% repeatable. May be related to report below, but as I'm only running one monitor and ite not just that the reticle is off centre I've created this separate report. https://forum.dcs.world/topic/283910-designation-reticle-is-not-centered-in-the-main-screen/#comment-4793857 Details Occurs on both 2.8.4.38947 MT Preview and 2.8.4.38947 (non MT) Note: Issue also occurs identically when secondary monitor (number 1 in pic above) is unplugged from GPU Short video excerpt showing issue.mp4 Mi-24p search offset.trk I also just tried unplugging my 4k screen and running dcs on my smaller (non 4k screen with the settings below) and had exactly the same issues. Edited April 20, 2023 by TooManyTims Added track and short video showing the issue
admiki Posted April 18, 2023 Posted April 18, 2023 1 hour ago, TooManyTims said: Summary I first thought that Petrovtich was not even searhing at all but then by luck discovered that he was, just with a huge offset from where I had commanded him to do so. In image belo you can see the "Designation Reticle" is way off centre and this screen shot is the instant after I've pressed the search command. The "Designation Reticle" is up in the sky and he is searching down in the bottom right (as seen through the hud). This is 100% repeatable. May be related to report below, but as I'm only running one monitor and ite not just that the reticle is off centre I've created this separate report. https://forum.dcs.world/topic/283910-designation-reticle-is-not-centered-in-the-main-screen/#comment-4793857 Details Occurs on both 2.8.4.38947 MT Preview and 2.8.4.38947 (non MT) Note: Issue also occurs identically when secondary monitor (number 1 in pic above) is unplugged from GPU Is this first search you have done in that mission? If you bank and force Petrovich to close sight to save gyros, once opened sight will stay in that position until you command another scan. You also said screenshot is taken instant after search command. If sight is way to one side (so it hits HUD limits) it takes a second or so for sight to get where you want it. It would be best if you can post a short track or video.
JIGGAwest Posted April 19, 2023 Posted April 19, 2023 (edited) This has been a problem since the inception of the Hind. I'm thought it had to do with multi-monitor configuration. But, I do see you have tried without a second monitor and you have it set to 1 screen. There's got to be something going on here if some people have this error and others don't ... Oh just followed the post above. It looks like someone has noticed this happends in 4k only. And I notice you are running 4k... So am I... Edited April 19, 2023 by JIGGAwest
Recommended Posts