All Activity

XR has two FOV's in IR. Thx NineLine. Will do. -Ryan

Могла. Наверное. На самом ушатаном борту во всех ВМС в сочетании с самой стремной командой инженерного персонала. Зачем игроку крайность, когда можно дать нечто среднестатистическое? Включая возраст самолёта. Ведь, если в игре показана обычная кабина Томкета, значит предполагается и существование такой, в которой и бомжу ночевать не хотелось бы. По моему логично. Как именно 160 дней похода могли износить так кабину? Может больше роялит тут просто возраст некоего конкретного борта, возможно даже списанного давно на момент взятия его за образец воспроизведения в игре? Как агрессивная морская среда может ошелушивать краску кокпита и стирать трафареты табло до такой степени, что они почти нечитаемы, при нахождении большую часть похода с закрытым фонарем, да ещё и частенько во внутренней палубе? Есть конкретные фотографии строевых F-14, находящихся в эксплуатации с такими кабинами?

странная балистика ,искандер и атакамс пикируют на цель на скорости 900 км/ч

I have been waiting for a solid Kiowa campaign for some time and was disappointed to find I couldn’t get it to load. I’m running the game through steam but placed the mission and liveries files in the directories noted in the user manual. I can see the campaign from the “my campaigns” tab within the user interface but clicking “ok” does not prompt the campaign itself to start. Other user made campaigns and single missions are working however. Any help would be awesome as I really want to fly this!

This dude is a defence sector employee, he has obligations what to say. Basically it's RU MOD opnion. I may not post phone footage from Oryol region with far misses vs 200 kph 3 meter drones here.

Облезлость облезлостью а мне в хитблюрах больше всего нравится звук - компенсирует отсутствие тактильной связи. Тарахтения эти на тряске, звуки кабины которые в реале слышно руками.

WIP

Reflected - Saw this on youtube and thought you might enjoy it, probably already seen it but well knowing your interest in WW2 flying and authentic recreations I thought I would post on the off chance you haven't. Might not be of direct help to campain building but sent purely for your viewing.

I'm using SimHaptic and now stall seems to come on way to early and some times due to certain engine settings. I've got a thread started on their discord about it. I agree initially when the module came out there didn't seem to be any stall haptic coming through, but now it's going off all the time. I wonder if this is related to this:

Sehr cool

Don’t think I’ve been this excited for a module release for a long time. Probably since the F14. I’m very hyped about the fulcrum. Still pretty angry about the Razbam situation particularly the Harrier personally as I fly that a lot. But I’ll still be getting the Fulcrum 100% it’s just such a great looking jet with so much character.

The Jeff doesn't utilise FM band. if you are running SRS you can use the additional radios from that.

As far as I'm aware "Bullseye" specifically is only used by the west so being designed and made by China our Frankenstein block 1.5 does not feature it assumedly PLAAF uses their own version under a different name but there's no such evidence for it I'd assume IRL they use the FPA/FPB stuff to do something similar and potentially block 2/3 got updated software to have some form of bullseye integration. But ultimately I'm not in a NATO airframe so I'm not expecting to use their systems, in a real pinch I'll just use map and tools to manually get my position. OAP could be an OK jerryrig I suppose but its more for handing off targets.

hello the shortcut should be Target: "C:\Program Files\Eagle Dynamics\DCS World OpenBeta\bin\DCS_updater.exe" Start in: "C:\Program Files\Eagle Dynamics\DCS World OpenBeta" your folder may be different. for sure you should be running everything from BIN. BIN and MT are the same files now and defaults as multithread.

Karachi is as sparsely modeled as the engineering spaces on the CVNs. It took me a while to recognize the harbor, and even then I had to cheat and reference maps. Never lived there, got to spend some time, and I have to say I really enjoyed the place. Nothing but pleasant memories. A little sad it's just a field of grass, not even a satellite photo superimposed on the terrain.

Thought that this could be a good discussion on motherboards. Yes, there are still B650's out there but they will become harder to find as time goes on. I decided that perhaps an X670E would be a bit better. I have been look at HUB X670E reports on thermals and for sure want something that runs at 80c or lower. Asrock looked to have some boards that were appealing, but until I know for sure that they have solved the issue with AM5, they are a no go. Any thoughts/suggestions would be appreciated.

I would like to report a bug. I read in an early changelog that this issue is fixed, but i have encountered this a lot of time. So, i noticed, that when i trying to rotate a button, its very laggy and stutters. When i switched to external view and rotating the camera WITH mouse the fps drops to 0 until i move my mouse. When i stop moving the mouse the fps jump to normal. I tried everything, but this issue sometime gone, when i re-start the whole game... sometimes everything works perfectly. Just for sure, i tried with older and a newest graphics driver (unistalled with DDU). Tried in windowed / fullscreen. After i found a topic, that mentioned such behaivor i tried to switching my mouse polling rate. When i drop to 500hz, and when this issue occured, the fps not dropped to 0, but the game was very stuttering. For a while, i droped the polling rate to 250hz, and i do not encounter this issue... at least until this very moment. I hope that this bug is addressed again. Sorry for my bad english, i tried my best... i just wanted to help others with this report.

I just noticed that this morning looking for a base for BadGuys(tm) while I fly out of Bagram. Saw the textures on the map, flew over and it's photo textures all over in that area, put a scout helo on the airbase and only had to climb fifty feet to see through all the grass to the underlying image, but the whole area is Kansas flat so I have to assume there's some elevation tweaking to be done as well. It's like that all around that canyon, so my assumption is that's part of the north map, which is the one I'm waiting for anyway. In the mean time the Blue guys and Red guys are working up plans for the Red assets up there. I'm sure all that will need tweaked if that is indeed part of the north map, but it also gives the red force an airbase, so win all around.

Thank you!

Don’t underestimate the Bombcat. It is very capable as a ground pounder, has a big payload, and I’d say for basic A2G you can get along with Jester. Even though of course a human RIO is always a bonus. And the F1 is just a glorious module with lots of distinct personality. (And quite easy to operate)

Never had that problem and I assumed they were F-15Es, but whatever, they really didn't bother me too much, I'm a heavy sleeper so if they were roaring in the night I was knocked out most of the time. Then again I wasn't there long anyway, since it was just coming in and out for heading back to the FOB and stuff. Just a transient.

I didn't actively stop windows update... For some reason its never updated to the latest windows version.

It looks like you have re-projection (SSW, or Synchronous Space Warp) enabled. This will half the frame rate and insert extra frames to keep 72Hz. In VD look for the setting SSW enabled, disabled and automatic in the headset VD menu and set it to "disabled". The you will see your actual FPS.

Hi all, After the last update DCS wouldn't load and just hung at the Launch Screen. All I got was a black screen with no icons. I tried Repair (quick and full), but it didn't work. I don't have any mods. I uninstalled and re-installed and now I have 2 icons, DCS and DCS-MT, where I used to only have 1 (I thought the MT version was now the default?), and, although I saved my user profile for my HOTAS, when I the Load Profile nothing changes. I've never had an issue updating before. Anyone help? Dr Spankle

The MFD image is a slightly different story, as it's generated by the graphics engine. Some data from the MFD can be received by a script into the DCS, but this isn't universal. Each module has its own way of doing this, with buttons having different identifiers, and each individual OSB button on the MFD can have dozens of different names in different locations. I worked on this a while ago, it required an additional Windows application, but with one of the DCS World updates, the way to configure the MFD display on the monitor became somewhat limited. Although I started thinking about it recently, it could still be done faster than partially handling the MFD data via script. However, due to certain MFD display limitations, this wouldn't be possible for everyone...