All Activity

After a 3 month break, I’m back to my Fulda Gap series. Last time, the Soviets took Fulda, and are now in full swing of concentrating their forces around the town, as of now, there are no proper ground forces between the soviets in Fulda and Frankfurt, A German mechanized platoon is stuck inside Fulda as the Soviets ran past them in their hurry. So the only forces NATO has in the area as the first day of the war is getting to an end is air power. 2 Flights of Apache, 1 Flight of GR 3 Harriers and 2 Flights of A10s, as well as some F-4s still in the area from the strike on the Soviet reinforcements. The mission gets chaotic, with Mavs, Hellfires, Iglas, SA-5s flying about. But the mission was mostly successful, most of the remaining soviet armor around Fulda was taken out. The question is, what happens during the night? Some 300 soviet vehicles are still heading for Fulda, even though their columns have taken a pounding

After a 3 month break, I’m back to my Fulda Gap series. Last time, the Soviets took Fulda, and are now in full swing of concentrating their forces around the town, as of now, there are no proper ground forces between the soviets in Fulda and Frankfurt, A German mechanized platoon is stuck inside Fulda as the Soviets ran past them in their hurry. So the only forces NATO has in the area as the first day of the war is getting to an end is air power. 2 Flights of Apache, 1 Flight of GR 3 Harriers and 2 Flights of A10s, as well as some F-4s still in the area from the strike on the Soviet reinforcements. The mission gets chaotic, with Mavs, Hellfires, Iglas, SA-5s flying about. But the mission was mostly successful, most of the remaining soviet armor around Fulda was taken out. The question is, what happens during the night? Some 300 soviet vehicles are still heading for Fulda, even though their columns have taken a pounding

Thanks for your support. We hope to get back to releasing new campaigns soon.

Can we have the option to select a naming convention for military hardware? At the minute we have a mix of NATO and Russian nomenclature on the F-10 map, the notifications, and the JTAC menu. For example, it shows an SU-33 firing an R-73 whilst an SA15 fires a 9M330 missile at an F-16 firing an AIM-120. Can we have the option to use purely NATO reporting names? I spent a career learning the range and ceilings of SA6s and SA11s without ever knowing they were called a Kub or a Buk! Similarly I know the threat posed by an AA-10C or AA-12, but need to look up what an R-77 is. Dr Spankle

Hello, I used to use an HP G2 with Open XR and Toolkit. Now I'm using a Meta Quest 3, and I assume it also works with Open XR and Toolkit. So that means the Quest 3's settings don't necessarily have the same settings as the HP G2's? And for the Quest 3 to work with Open XR and Toolkit, do I also need to disable the HP G2's settings because it's still installed? I need your advice. Thanks in advance for your help.

With altitude set to 98ft they drop, but always 200m short of the target. If I increase the altitude to 200ft, they zoom up to a few thousand feet then plunge themselves vertically right into the ground.

"airspeed gauge" Anything should work, really, as long as it's a different name than "default."

In my missions they drop all four, however they consistently drop them 200m short of the target on low-altitude runs, and in some cases prior to the target they will zoom climb up to 2,000ft then suddenly spiral themselves into the ground for no reason.

You are correct, I was assuming that the DDS built-in compression was better, guess it is tuned for faster uncompression than minimum size. However, on the liveries I tested the difference isnt as big as 55 vs 278:

Ma che è successo? (leggendo il primo post)

Too hardcore for DCS and "no natural enemies" for that beauty

The ME offers two kinds of template, my original post uses "Static Templates" while you are using "Group Templates", mine look like this: 1) First I select the Static Template from my collection: 2) This template contains one aircraft of each type, for which I have setup its radio frequencies to be as compatible with each other as possible: Each of these aircraft can then be copied and pasted wherever you need it, once you have the mission ready you can delete these "template" aircrafts. However, the new DTC feature of DCS seems to be another way of attaining the same objective, perhaps you should consider it instead of my technique

Nevada - Nellis return After a long flight CVW-66 has returned to Nellis for a reharpening of trainings and our tools. Nellis procedures will be refreshed and both A2A and A2G abilities tested. Practice until our next departure and an oppertunity for new members to join us for both the Hornet and Tomcat. (Check our recruitment post)

This looks very interesting

Fascinating. I'll try to zip some liveries to see the results.

Ended up being the nvidia pre rendered frames set to 1. Changed it to 2 and all is fine.. Cheers for the help though chaps

I'm hoping for a Mach 1+ attack helicopter.

It doesn't seem to occur if you just extend and retract in the air, I don't think it's a hydraulic pressure issue, so I would be very interested in what is going on if it's not wear and tear. The actual flight manual doesn't seem to say anything about it.

1-Set radio to contact Beslan (Caucasus) ATC: R-853 to channel 6 (141MHz) or YADRO-1 to 4750KHz 2-Select R-863 (all left) on SPU-8 3-Contact ATC to request Start-Up 4-SPU-8 "automagically" selects VHF (second position left to right, not functional as by Chuck's Guide) after the ATC contact Have to re-select the correct radio before any contact with ATC. DCS 2.9.19.13478 I don't have a log/track file(gave up using the radio, the last one I did has already been overwritten)... if you can't reproduce let me know (so I jump into the chopper and make a new one

Not on the F1 CE/EE/BE, don't know about other variants. (Magic 2, so after 1985)

В радиусе ста метров)))

Hey @PeeJott17 I had the same idea today and now I read that you was the last post Will fly with the F104 first Jimbo

В первой на Т летали, потом мт появились.

Gotcha! If I don't activate them I do get the fault so I was just trying to clear the fault I guess. I won't even press the button to activate the EGI and just acknowledge/clear the fault instead. Thanks, appreciate you!