All Activity
- Past hour
-
Whats the difference?
-
MIG-29 confirmed release date September?
Czar replied to The Gryphon's topic in DCS: MiG-29A Fulcrum
@Dača : ) -
Casperpitbull joined the community
-
Good day! I encountered this problem on the Syria map. While playing the F-16C Last Out: Weasels over Syria II Campaign, I noticed that the FPS does not rise above 30 frames, and this is the maximum, while the processor and video card are loaded by no more than 20-25%. I tried to disable all the mods, disabled Tacview, changed the graphics settings from high to low, this did not affect the result in any way. Whatever I did, it was always the same. FPS 20-25 frames, the load on the processor and video card does not rise above 30%. And in one of the missions, flying to the coast, the FPS (near the ground) drops to 9 frames, the load on the processor and video card is 10-20%. You pause the FPS, it rises to 100 frames, the load is up to 60-80%. I don't know what it is connected with, is it the Syria map or the mission file is so heavy. The main question is, why is the video card and processor not loaded? If anyone knows, help! Thanks! Доброго времени суток! Столкнулся с такой проблемой на карте Сирии. Проходя компанию F-16C Last Out: Weasels over Syria II Campaign, обратил внимание, что обратил внимание на то что ФПС, не поднимается выше 30 кадров, и это максимум, при этом процессор и видеокарта загружены не более чем на 20-25%. Я попробовал отключить все моды, отключил Tacview, менял настройки графики от высоких до низких, это ни как не повлияло на результат. Что бы я ни делал, всегда одно и тоже. ФПС 20-25 кадров, загрузка процессора и видеокарты не поднимается выше 30%. А в одной из миссий подлетая к побережью- ФПС (у земли) падает до 9 кадров, загрузка процессора и видеокарты 10-20 %. Ставишь на паузу ФПС вырастает до 100 кадров, нагрузка до 60-80%. НЕ знаю с чем это связано, это карта Сирии или файл миссии такой тяжёлый. Главный вопрос, почему не загружена видеокарта и процессор? Если кто знает, помогите! Спасибо!
-
Are you using the OpenXR API Layers GUI tool according to Tallys Video? If so, please have a look that Necksafer is on #1 in the ranking (before QV). In my case, that resolved the problem with Necksafer. And also deactivate Eye Tracking in DCS when using Necksafer.
-
- Black Labrador - Flask - Cheese & Pickle sandwiches - Autopilot (I think some people really want it), I’m fine without but I really want Target Indicators, Flare gun, coloured smokes and my wipers working. Just don’t touch the bleedin tailwheel again
-
Я попробовал отключить все моды, отключил Tacview, менял настройки графики от высоких до низких, это ни как не повлияло на результат. Что бы я ни делал, всегда одно и тоже. ФПС 20-25 кадров, загрузка процессора и видеокарты не поднимается выше 30%. Подлетаешь к побережью- ФПС (у земли) падает до 9 кадров, загрузка процессора и видеокарты 10-20 %. Ставишь на паузу ФПС вырастает до 100 кадров, нагрузка до 60-80%. НЕ знаю с чем это связано, это карта Сирии или файл миссии такой тяжёлый. Главный вопрос, почему не загружена видеокарта и процессор? Если кто знает, подскажите! Спасибо! I tried disabling all mods, disabled Tacview, changed graphics settings from high to low, it didn't affect the result in any way. Whatever I did, it was always the same. FPS 20-25 frames, CPU and GPU load doesn't rise above 30%. You fly to the coast - FPS (near the ground) drops to 9 frames, CPU and GPU load is 10-20%. You pause - FPS rises to 100 frames, load up to 60-80%. I don't know what it's connected with, is it the Syria map or the mission file is so heavy. The main question is, why aren't the GPU and CPU loaded? If anyone knows, HELP me! Thanks!
-
One problem model out of fifty... need help
TeTeT replied to Ripcord's topic in Static/AI Mods for DCS World
Hi @Ripcord, let me know if you're interested in arming the guard tower I just sourced from cgtrader. Riggins is not complet yet, background are the two huts in VWV: -
You got some shapes Seabat Looking good Eightball
-
Thirsty changed their profile photo
-
Oh definitely. I'd also be willing to fork over another 30-50 euro for a MiG-21 v2.0 just so it gets brought up to the current standard, but I am a bit biased as our airforce used to fly them
-
I'm sure you are talking about community modding, but just to be sure, you should not use or modify official dev content / work without permission. thank you
-
I still have it.
-
Hi, can we check, are you using scripts to spawn and load equipment. We will take a look at the track once attached. thank you
-
Initial feedback M1 & M2
Hillman replied to Hillman's topic in DCS: F/A-18C Operation Mountain Breeze Campaign
Also look into if you can disable afterburner use for lead until the time of actual combat. I recently watched a youtube from Spudnocker explaining this feature in the ME. -
Logan54 started following Some easy corrections and MiG-21-93 community mod?
-
I know that ED and Devs are limited in actions according Soviet aircraft, but we are not limited, right? I want to do modification of current MiG-21 but add some new features like better radar, modern weapons, probably new cockpit liverie. I already made new liverie, and trying to find somebody who can help with coding radar. If you can help, you are welcome here. Thank you.
-
Mission 3 and overall AI lead
Hillman replied to Eng's topic in DCS: F/A-18C Operation Mountain Breeze Campaign
Hi, I enjoy the campaign, but I get a bit frustrated with leads fuel-management where he/she constantly use the afterburner after a turn on way to target or in a holding pattern. I understand there now is a way in DCS to restrict the AI from using AB. It would be great if this could be enabled until you get to the actual battle. This I believe also would make it a bit easier to keep in formation and avoid all the complaints from lead. I enjoy the fact that you are actually not flying lead, but the abrupt flying from the AI makes it a bit frustrating sometimes. -
I also find myself typing ctrF "mosquito" in every new changelog... And I'll also keep asking for it under trailers of new modules on youtube. I want to continue flying the excellent Mossie campaigns but keep putting it off. And it really doesn't take much, for me those are the most important things (did I forget anything major?) - optional pilot and navigator bodies - fix for artificial horizon - elevator trim fix (?) - loadout options like flares - working windscreen wipers Thanks devs in advance!
- Today
-
I tried all the cockpit skins around including those one. They are either too clean or the color is not the correct one or too bright. We need a weathered cockpit (not new) but with the color as per picture posted.
-
Hi Swallow, Reprojection helps your VR headset stay smooth by creating extra “in-between” frames when your PC can’t keep up. This means you still see motion at the full refresh rate, even if your computer is only rendering half the frames. The trade-off is that you might notice small visual glitches, like wobbling or ghosting, during fast movement.
-
Release in 2026 but barely any info 6 months before 2026?
Pribs86 replied to LimePartician's topic in DCS: F-35A
"What version of the F-35? We will first release the F-35A. We may later also offer the F-35B Vertical Takeoff and Landing (VTOL) and F-35C aircraft carrier catapult versions, but this has yet to be determined." -
Military Assets for DCS by Currenthill
antiload replied to currenthill's topic in Static/AI Mods for DCS World
Hi, Have you clicked the history button? There is a history button on the mission planning screen that allows modern or no historical period. Try that. -
Agreeed, I'd like a 2 or 3 way swich NATO only Russian only and if these aren't going to be too crowded to be readable NATO (Russian) Russian (NATO)
-
Kamikaze drone is such a dumb word for guided missile
-
Probably possible for dev to tune something in Hind? I mean: 1. Stabilizator in min position (because stabilizator AOA=main rotor AOA, that is in min position when cold) 2. To have option with cargo door opened in cold start position 3. To correct sync main rotor blades position and AOA with tail rotor blades position and AOA 4. To set front blade in 1 o`clock position before start (because it seems their right start position) 5. Grren circles are 3d model inaccuracies. 6. To add better sound for CPG` control activator (red lever at collective) It have usual button sound. Thank you. link with picture
-
A great tuch for road runways
-
This would be cool to add.