-
Posts
197 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Trigati
-
It might be set in Track IR software to load default profile when DCS runs. Go to the titles tab in TIR and scroll down to check/change it. Other option, I think, is to click the Exclusive box next to where you select the profile which means it will only use that profile and not switch based on which game is running Sent from my iPhone using Tapatalk
-
I don’t know if this software allows for input back to your PC, I don’t think it does. If it did, you’d need to use something like Helios to get that touch input back into DCS Sent from my iPhone using Tapatalk
-
Yes, I think it works for making an iPad a display. Sent from my iPhone using Tapatalk
-
I had Air Superiority as a teenager but didn’t know anyone as geeky about planes….so never got to play it. Sent from my iPhone using Tapatalk
-
You could use Spacedeck, which would let your other screens (pc or tablets) pretend to be monitors connected to you DCS pc https://www.spacedesk.net Sent from my iPhone using Tapatalk
-
Why the weapons limitations on the Hornet?
Trigati replied to Beirut's topic in Military and Aviation
I'm going to foolishly guess an answer to your question...for the fun of it...but maybe the Hornet cannot doesn't carry the tripe Mavs on a station as they couldn't get it to work for a Carrier (controlled crash) landing and didn't want to RnD new pylons/mounting hardware etc..... As I said, just a guess, but the Navy's mission requirements are very different from the air force so that would explain difference in capabilities and loadouts. -
Are you sure you’re responding the the thread you think that you are? Sent from my iPhone using Tapatalk
-
STREAM DECK PROFILES LIBRARY
Trigati replied to ZQuickSilverZ's topic in PC Hardware and Related Software
At a guess you also need to edit the aircraft name in the file itself. Sent from my iPhone using Tapatalk -
Bold Cheetah - A 13 Mission DCS F/A-18 Campaign by Sedlo
Trigati replied to Sedlo's topic in Missions and Campaigns
Ok, sorted. Seems like my GroundCrew.lua was broken and needed to be repaired. Sorry for having taken your time up. And thanks again for the campaign! Sent from my iPhone using Tapatalk- 423 replies
-
- 2
-
-
- f/a-18c
- persian gulf
- (and 14 more)
-
Bold Cheetah - A 13 Mission DCS F/A-18 Campaign by Sedlo
Trigati replied to Sedlo's topic in Missions and Campaigns
Thanks, don’t waste your time on it for now, I’ll re-run a couple of times and see if any of the F14 launch. If they still dont I’ll run through a repair etc and let you know. Thanks for taking time to check and fingers crossed it’s just my end. Sent from my iPhone using Tapatalk- 423 replies
-
- f/a-18c
- persian gulf
- (and 14 more)
-
Bold Cheetah - A 13 Mission DCS F/A-18 Campaign by Sedlo
Trigati replied to Sedlo's topic in Missions and Campaigns
Hi Sedlo, thanks for the campaign. I got to mission 7 but the Tomcats line up faster than I start and then block the cats....probably a standard DCS AI/Pathing/Carrier type issue but wanted to let you know in case you can work round it for your next update. I've skipped onwards. Small track attached, minimal startup but it shows the issue. I run no mods to the DCS files except I have edited my CMD_ALE47.lua to pre-program my countermeasures and use custom binds. BC_M7_TomcatBlocks.trk- 423 replies
-
- f/a-18c
- persian gulf
- (and 14 more)
-
Yes, if you are using the standard one then it's very likely causing the issues. It has some really cool code built into it (many of them do, I guess developed by the same person) which pulls not only all the standard aircraft data but also pulls map, vehicle, object and AI data.....so it can display the direction/dictance to nearest enemy, SAM, airbase etc etc....which could be processing you don;t need, although I doubt that's the problem, it's more likely that the server is restricting/not sending some of that data which causes the scripts to stutter/fail/recover...if your version of that file has these rows I recomend commenting them out/disabling them and trying. if LoIsObjectExportAllowed() then -- returns true if world objects data is available if LoIsOwnshipExportAllowed() then -- returns true if ownship data is available ExportScript.LoAircraftInfo(mainPanelDevice) -- Provides a lot of aircraft properties ExportScript.AirportInfo(mainPanelDevice) -- Provides info on the two closest airports ExportScript.WindsAloft(mainPanelDevice) -- Gets winds at the aircraft ExportScript.GroundRadar(mainPanelDevice) -- Reports 2 closest friendlies and 2 enemies (Use in Single Player) ExportScript.AirRadar(mainPanelDevice) -- Reports 2 closest friendlies and 2 enemies (Use in Single Player) ExportScript.IglaHunter(mainPanelDevice) -- Locates closest Igla (Use in Single Player)
-
Ok, not at home so cannot get too involved but I had similar issue, the Virpil LED export started causing the ExportScript to lag badly but it didn’t happen every time, just most of the time then stopped happening for a week then started again. So my first advice is move exportscript to the top and disable your sim shaker lines and try that a few times. If still bad you could try turning off winwing instead. If you can isolate either of those not playing nice with exportscript that’s a start. Then playing with order and timeouts is a slow process. The other element that causes issues on some servers not others is if the Apache export file uses any old FC3/base game info commands as some servers disable them and it can cause the script to hang a bit. Sent from my iPhone using Tapatalk
-
Yep, it’s a known issue that we’ve been told is not simple to correct. I found a thread on here about using reshade to up the bright and gamma on the displays without messing with my main view. Try a search on here or you tube. Let me know if you can’t find and I’ll go search or write you some instructions tonight/tomorrow. Sent from my iPhone using Tapatalk
-
Are these mods installed by default when updating DCS World Open Beta ?
Trigati replied to Swiso's topic in DCS Modding
They are not default, they are all unofficial mods. Sent from my iPhone using Tapatalk -
Question about Streamdeck lua files profiles
Trigati replied to Swiso's topic in PC Hardware and Related Software
Often the author of the SD profile will fix/change/add things to get their profile working the way they want it to….so unless you want to get into editing LUA yourself I would recommend using the file supplied with the SD profile Sent from my iPhone using Tapatalk -
I think it’s a call of checking the device/data exists before sending as export. It gets flaky when sending null data, fails and never recovers I think. And as you suggest you are not in plane at start, therefore that would crash the export. if I have time I’ll take a look and report back. Sent from my iPad using Tapatalk
-
I was doing this, but I no longer have my TM stuff setup and would have to go through old backups to find the scripts Try these threads as a starting point. Maybe I can help further when I have more time.
-
unfortunately not for beginners
Trigati replied to Quasi's topic in F-16C Weasels over Syria Campaign
Shame, seems like a reasonable thing have fixed. Sent from my iPhone using Tapatalk -
unfortunately not for beginners
Trigati replied to Quasi's topic in F-16C Weasels over Syria Campaign
Thanks, and I agree asking for changes is reasonable, I just feel that some may think sharing of a workaround is disrespectful as they feel it undermines their way of doing things (I've been pulled up on that by someone in the past for sharing this info). There should be an easier way to do this but only in the context of Single Player, for which the user should have final say on what settings they want, even spoiling the vision/design of a mission/campaign or not. But there needs to be this stricter control for missions made for Online/Multiplayer where such settings could be considered exploits/cheats. So it needs to be updated by ED to work in the right way. May I suggest to other reading this....to those people who are very 'motivated' to have control back get together and get this raised formally as a defect in the core game mechanic....or the feature to have it working for single player missions/campaigns added to the wishlist. In the end it really is an ED issue not a mission builder /campaign creator issue. -
If wings open you have to hold the button down to have hi gain. Just pushing button doesn’t work. Wings folded you can push button and then it stays in hi gain. Guess that’s a ‘carrier’ thing. Sent from my iPhone using Tapatalk