Jump to content

Recommended Posts

Posted
Hi all, I have problem with VR. DCS will crash every 20 minutes with any aircrafts. I tried reinstalling Oculus home, switching USB 3.0 port, removing fxo & metashader folders. DCS will be normal / no crash if I don't use VR.

GPU driver updated to the latest patch. So anyone here knows the solution ?

 

Log attached.

 

Make sure that Oculus Home isn’t in demo mode as that will stop any app after 20min.

Posted
So is the VR optimization update out yet? Haven't been able to get a up to date, present day verification yet, I keep seeing posts like a week or more ago mentioning it.

 

Not yet, Wags stated they finished the Caucasus and are working on the other maps.

All they have said is soon.

Don B

EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero|

Posted
Not yet, Wags stated they finished the Caucasus and are working on the other maps.

All they have said is soon.

Thank you for your response, yeah I seen his post, but that was a good week or two ago, so I just wanted to get an update, thank you.

Posted
Make sure that Oculus Home isn’t in demo mode as that will stop any app after 20min.

 

Thank you, but Oculus Home isn't in demo mode.

Posted
Thank you, but Oculus Home isn't in demo mode.

 

If you’ve checked the setting in Oculus Home and confirmed it’s not in demo mode, then fine. But if you’re assuming it’s not in demo mode because you reinstalled it, then you really need to check.

 

Also, check to see if there a memory leak as that can also cause this.

Posted
If you’ve checked the setting in Oculus Home and confirmed it’s not in demo mode, then fine. But if you’re assuming it’s not in demo mode because you reinstalled it, then you really need to check.

 

Also, check to see if there a memory leak as that can also cause this.

 

Yes, I already set Page file from 5000-20000Mb, also turn off save power in all usb slots. :(

Posted
Yes, I already set Page file from 5000-20000Mb, also turn off save power in all usb slots. :(

 

Just set it to auto and forget about it. Unless you're using a magnetic HDD, there's no reason to physically set the page file. Even then the idea was that sequential read of a contiguous block is faster. I'm sure it was, but I never noticed the difference.

hsb

HW Spec in Spoiler

---

 

i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1

 

Posted

Thanks to everyone for the suggestions and sorry for the late response - I’m travelling at present. When I get back I’ll test your suggestions and am sure I’ll find they work.

Posted

Any update/ETA as to when the VR patch (50% performance increase ) will be?

i9-9900k @4.80Ghz

32Gb Ram / 2tb SSD / RTX 2080ti

Samsung 49" QLED

Pimax 5k+ / CV1 / TrackIR5

Thrustmaster Hotas/Throttle

Posted

Godiwishiknew....

9700k @ stock , Aorus Pro Z390 wifi , 32gb 3200 mhz CL16 , 1tb EVO 970 , MSI RX 6800XT Gaming X TRIO , Seasonic Prime 850w Gold , Coolermaster H500m , Noctua NH-D15S , CH Pro throttle and T50CM2/WarBrD base on Foxxmounts , CH pedals , Reverb G2v2

Posted
Any update/ETA as to when the VR patch (50% performance increase ) will be?

 

2 more weeks

New hotness: I7 9700k 4.8ghz, 32gb ddr4, 2080ti, :joystick: TM Warthog. TrackIR, HP Reverb (formermly CV1)

Old-N-busted: i7 4720HQ ~3.5GHZ, +32GB DDR3 + Nvidia GTX980m (4GB VRAM) :joystick: TM Warthog. TrackIR, Rift CV1 (yes really).

Posted
Is this verified?

 

 

 

2 weeks (tm stands for trademark) is an old flight sim community joke (since the falcon 4 times iirc)....are you new to flight sims? :D

🖥️ R7-5800X3D 64GB RTX-4090 LG-38GN950  🥽  N/A  🕹️ Realsimulator FFSB MKII Ultra+F-16 grip+F/A-18 grip, VKB Stecs Max, VKB T-Rudder MKV, Razer Tartarus V2 💺Secrets Lab Tytan, Monstertech ChairMounts

CVW-17_Profile_Background_VF-103.png

Posted
2 weeks (tm stands for trademark) is an old flight sim community joke (since the falcon 4 times iirc)....are you new to flight sims? :D

Been using them for a few years now, thanks for the heads up.

Posted

It comes from when being asked when something will be ready for release or such like that, the standard response always seems to be "Two more weeks!!!".

i7-7700K, 32GB DDR4, 525GB SSD, 1TB HDD, GTX 1080Ti 11GB, Liquid Cooling, Win 10, Warthog HOTAS, TPR Pedals, HP Reverb, Oculus Rift with Touch, Jetseat and bass shakers, PointCTRL, and Scale F-14B Cockpit

Posted
It comes from when being asked when something will be ready for release or such like that, the standard response always seems to be "Two more weeks!!!".

 

IIRC it came from Oleg Maddox of the old Maddox Games.

"Two weeks be sure".

Don B

EVGA Z390 Dark MB | i9 9900k CPU @ 5.1 GHz | Gigabyte 4090 OC | 64 GB Corsair Vengeance 3200 MHz CL16 | Corsair H150i Pro Cooler |Virpil CM3 Stick w/ Alpha Prime Grip 200mm ext| Virpil CM3 Throttle | VPC Rotor TCS Base w/ Alpha-L Grip| Point Control V2|Varjo Aero|

Posted

Also there is "SOON™". Same basic gag, all based around the fact that devs who answer the ever persistent community question of "when" almost always live to regret it!

[sIGPIC][/sIGPIC]

Demo of my 6DOF Motion VR Sim:

Posted
Also there is "SOON™". Same basic gag, all based around the fact that devs who answer the ever persistent community question of "when" almost always live to regret it!

 

 

Although Duke Nukem took it to a WHOLE new level. :D God I loved that game.

hsb

HW Spec in Spoiler

---

 

i7-10700K Direct-To-Die/OC'ed to 5.1GHz, MSI Z490 MB, 32GB DDR4 3200MHz, EVGA 2080 Ti FTW3, NVMe+SSD, Win 10 x64 Pro, MFG, Warthog, TM MFDs, Komodo Huey set, Rverbe G1

 

Posted

VR head tracking rates/speed.

 

Greetings All,

 

I've been using Oculus Rift now for some time.

One setting I cannot find is the Head Tracking Rate or Speed. When using TrackIr you can easily change the speed of head movement in the GUI but this doesn't seem to be available in the Oculus software or in the DSC World settings.

My problem is that I have a neck injury, so my head movement is limited and painful, therefore checking six is nearly impossible for me without taking my hands off the controls and moving my whole body out of position.

Has anyone been able to alter this setting yet?

Posted

As far as i'm aware its 1:1 movement anything else would potential cause sickness.

Win 10 64//4.5g i7 Kaby Lake//gtx Titan x pascal//16gb 3200ram//Asus Maximux Hero IX//Oculus Rift//

Posted
Greetings All,

 

I've been using Oculus Rift now for some time.

One setting I cannot find is the Head Tracking Rate or Speed. When using TrackIr you can easily change the speed of head movement in the GUI but this doesn't seem to be available in the Oculus software or in the DSC World settings.

My problem is that I have a neck injury, so my head movement is limited and painful, therefore checking six is nearly impossible for me without taking my hands off the controls and moving my whole body out of position.

Has anyone been able to alter this setting yet?

 

 

1:1 is how it is meant to be, you're thinking of TrackIR which is different concept

| VR goggles | Autopilot panel | Headtracker | TM HOTAS | G920 HOTAS | MS FFB 2 | Throttle Quadrants | 8600K | GTX 1080 | 64GB RAM| Win 10 x64 | Voicerecognition | 50" UHD TV monitor | 40" 1080p TV monitor | 2x 24" 1080p side monitors | 24" 1080p touchscreen |

Posted

The good news is that the 1:1 tracking offers superior spatial/situational awareness .

9700k @ stock , Aorus Pro Z390 wifi , 32gb 3200 mhz CL16 , 1tb EVO 970 , MSI RX 6800XT Gaming X TRIO , Seasonic Prime 850w Gold , Coolermaster H500m , Noctua NH-D15S , CH Pro throttle and T50CM2/WarBrD base on Foxxmounts , CH pedals , Reverb G2v2

Posted
Greetings All,

 

 

 

I've been using Oculus Rift now for some time.

 

One setting I cannot find is the Head Tracking Rate or Speed. When using TrackIr you can easily change the speed of head movement in the GUI but this doesn't seem to be available in the Oculus software or in the DSC World settings.

 

My problem is that I have a neck injury, so my head movement is limited and painful, therefore checking six is nearly impossible for me without taking my hands off the controls and moving my whole body out of position.

 

Has anyone been able to alter this setting yet?

 

 

 

You can’t do that in VR...you would have heavy sickness doing that.

🖥️ R7-5800X3D 64GB RTX-4090 LG-38GN950  🥽  N/A  🕹️ Realsimulator FFSB MKII Ultra+F-16 grip+F/A-18 grip, VKB Stecs Max, VKB T-Rudder MKV, Razer Tartarus V2 💺Secrets Lab Tytan, Monstertech ChairMounts

CVW-17_Profile_Background_VF-103.png

Posted
Greetings All,

 

I've been using Oculus Rift now for some time.

One setting I cannot find is the Head Tracking Rate or Speed. When using TrackIr you can easily change the speed of head movement in the GUI but this doesn't seem to be available in the Oculus software or in the DSC World settings.

My problem is that I have a neck injury, so my head movement is limited and painful, therefore checking six is nearly impossible for me without taking my hands off the controls and moving my whole body out of position.

Has anyone been able to alter this setting yet?

 

Sorry your neck hurt, you might use a rotating desk chair to help you.

Mirage fanatic !

I7-7700K/ MSI RTX3080/ RAM 64 Go/ SSD / TM Hornet stick-Virpil WarBRD + Virpil CM3 Throttle + MFG Crosswind + Reverb G2.

Flickr gallery: https://www.flickr.com/gp/71068385@N02/728Hbi

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...