SNAFU Posted May 1, 2016 Share Posted May 1, 2016 a Uh-1 with a autohover can be more effectiive then this :( where to start the auto hover only engages sometimes when you press auto collective in a hover it 1 ither kills you or doesnt work at all its max speed with 4 hots is around 150 kmph again a uh-1 is like twice as fast then it with a full loadout great release................................ not And where is the bug? [sIGPIC][/sIGPIC] Unsere Facebook-Seite Link to comment Share on other sites More sharing options...
GunfighterSIX Posted May 1, 2016 Share Posted May 1, 2016 I dont have a trim ball under the attitude indicator. HHC, 229th AHB, 1st Cav Div http://1stcavdiv.conceptbb.com/ Link to comment Share on other sites More sharing options...
Mt5_Roie Posted May 1, 2016 Share Posted May 1, 2016 For auto-hover to engage the following parameters need to be met: Speed - less then 18km/h Pitch - less then 30 degrees VVI - less then 120 meters per second if I recall correctly. Otherwise it won't turn on. If your going to turn off auto-collective, make sure your collective is up to the level it was when it was hovering. Otherwise you'll drop pretty quickly. And remember there are vast differences between this helicopter and the Huey. The huey is wider and has a bigger engine. The Gazelle is a "light" helicopter that is very narrow compared to most. a Uh-1 with a autohover can be more effectiive then this :( where to start the auto hover only engages sometimes when you press auto collective in a hover it 1 ither kills you or doesnt work at all its max speed with 4 hots is around 150 kmph again a uh-1 is like twice as fast then it with a full loadout great release................................ not Coder - Oculus Rift Guy - Court Jester Link to comment Share on other sites More sharing options...
Darkbrotherhood7 Posted May 1, 2016 Share Posted May 1, 2016 Textures bugs: Mission: "To intercept and destroy aircraft and airborne missiles in all weather conditions in order to establish and maintain air superiority in a designated area. To deliver air-to-ground ordnance on time in any weather condition. And to provide tactical reconaissance imagery" - F-14 Tomcat Roll Call [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Sarge55 Posted May 1, 2016 Share Posted May 1, 2016 a Uh-1 with a autohover can be more effectiive then this :( where to start the auto hover only engages sometimes when you press auto collective in a hover it 1 ither kills you or doesnt work at all its max speed with 4 hots is around 150 kmph again a uh-1 is like twice as fast then it with a full loadout great release................................ not Another example of not researching something before buying. Better read up on the Gazelle before you embarrass yourself some more. :book: [sIGPIC][/sIGPIC] i7 10700K OC 5.1GHZ / 500GB SSD & 1TB M:2 & 4TB HDD / MSI Gaming MB / GTX 1080 / 32GB RAM / Win 10 / TrackIR 4 Pro / CH Pedals / TM Warthog Link to comment Share on other sites More sharing options...
Ca11 Me Karma Posted May 1, 2016 Share Posted May 1, 2016 a Uh-1 with a autohover can be more effectiive then this :( where to start the auto hover only engages sometimes when you press auto collective in a hover it 1 ither kills you or doesnt work at all its max speed with 4 hots is around 150 kmph again a uh-1 is like twice as fast then it with a full loadout great release................................ not You do realize the Huey has a more powerful engine than the Gazelle when it comes to speed with loadouts? Of course it'll be faster. It's barely day 2 release of an OPEN BETA and you're already throwing a fit because it's to hard for you. Get Good. Other than that tangent, when it comes to bugs: 1. Had a bit of an issue with keybindings not being able to be switched. 2. Have crashed into buildings multiple times and survived miraculously. 3. Random breakage occurs when spawning (Either the tail breaks, or the whole chopper explodes) 4. Some switches are not turned on when using the "cheat" startup sequence. Mostly has been the Attitude Indicator. 5. Not sure if a bug, but sometimes tight turns can cause instant G-Lock. Love this aircraft keep up the work! :) :thumbup: Link to comment Share on other sites More sharing options...
pittlebelge Posted May 1, 2016 Share Posted May 1, 2016 The friction between the skids and the ground seems super strong, there is some mean superglue effect. Especially noticeable in Vegas parking lots. Link to comment Share on other sites More sharing options...
sabreman Posted May 1, 2016 Share Posted May 1, 2016 Turning off magnetic force trim doesn't untrim your cyclic. Not sure if this is intended or not [ame] [/ame] Link to comment Share on other sites More sharing options...
VuDuBu Posted May 1, 2016 Share Posted May 1, 2016 Not really a bug, most of the things I've noticed have already been mentioned, but I'd like to bind the sunvisor to a button on my HOTAS. This does not seem to be possible. Loving it very much btw! Link to comment Share on other sites More sharing options...
ED Team BIGNEWY Posted May 1, 2016 ED Team Share Posted May 1, 2016 thread cleaned. Guys if you see profanity and personal insults in a thread use the report function on the bottom left of the post. 1 Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, HP Reverb G2 Link to comment Share on other sites More sharing options...
msalama Posted May 1, 2016 Share Posted May 1, 2016 great release................................ not From the manual: "The SA-342M1 Gazelle uses the TURBOMECA Astazou XIV Tuboprop engine, which directly comes from the Astazou II engine, used on the Aerospatiale Alouette Helicopter. Developing up to 870 hp, this engine is perfectly fitted on the Gazelle. Considering its very lightweight, the standard helicopter version, without HOT3 and Viviane sighting system, is able to reach a VNE of 310km/h. Unfortunately, on the SA-342M1 Viviane version, the rotor blades choice allows a more important take-off mass but decreases the Vne to 280km/h, and the helicopter will hardly reach a maximal forward flight speed of 180 to 200km/h." The DCS Mi-8MTV2. The best aviational BBW experience you could ever dream of. Link to comment Share on other sites More sharing options...
Cykyrios Posted May 1, 2016 Share Posted May 1, 2016 I just tried a quick flight over Groom Lake, starting at 2000 m and 200 km/h. I came to a stop and tried to get into VRS... much to my surprise, I didn't notice VRS at all: the rotor didn't overspeed, and I was falling at about 70 km/h. When I got close to the ground, I simply pulled the collective and stopped the descent. The only way I got the rotor to somewhat overspeed was to autorotate, but even then the alarm only sounds a second or 2 at a time, while my collective is at zero and I try my best descending vertically. Link to comment Share on other sites More sharing options...
drummer Posted May 1, 2016 Share Posted May 1, 2016 In the external views I am seeing no movement of the actual swashplate. The blades have movement but the swashplate which would initiate that does not appear to move. Bug or just not implemented? Link to comment Share on other sites More sharing options...
rogonaut Posted May 1, 2016 Share Posted May 1, 2016 roof seems to be somewhat transparent - sun is coming threw upper panel. screen attached Link to comment Share on other sites More sharing options...
ED Team BIGNEWY Posted May 1, 2016 ED Team Share Posted May 1, 2016 roof seems to be somewhat transparent - sun is coming threw upper panel. screen attached dcs issue not Gazelle, already reported. Thanks Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, HP Reverb G2 Link to comment Share on other sites More sharing options...
Xtrasensory Posted May 1, 2016 Share Posted May 1, 2016 Turning off magnetic force trim doesn't untrim your cyclic. Not sure if this is intended or not Your joystick is centered or do you keep it in that position? If you turn off the magnetic trim it should stay in hat position if your joystick is not centered. http://1stcavdiv.conceptbb.com/ 229th Air Cav, D Coy, Gunships Link to comment Share on other sites More sharing options...
DickeAutos Posted May 1, 2016 Share Posted May 1, 2016 There seems to be no option to set the collective to a button or key or am I just retarded cause I could not find any besides in the axis tabs. I think you are right. Axis can't be assigned to the keyboard (at least I haven't found a way to do so), which makes the Gazelle impossible to fly for me with my 3 axis old-school joystick (Logitech Attack 3). I think we have to wait until axis can be mapped to the keyboard as well. Link to comment Share on other sites More sharing options...
jpdesvals Posted May 1, 2016 Share Posted May 1, 2016 Hello everybody , thx all the team for this tremendous work ! I saw in the FAQ that the force feedback "won t be fully implemented yet" ..aparently i do not have any force feedback effect at all even return to center so i play with my warthog instead of the sidewinder FFB2 so is that normal for the moment ? Link to comment Share on other sites More sharing options...
Izgud Posted May 1, 2016 Share Posted May 1, 2016 I noticed that the rotor turns considerably slower than it should (tops out at ~180 RPM) - is this by design or might this be fixed at some point? Might just be me, but it stands out next to other helicopters, especially at higher frame rates. Link to comment Share on other sites More sharing options...
flo57100 Posted May 1, 2016 Share Posted May 1, 2016 Hi all ! I don't know if it does the same to you, but for me the cockpit views (pilot and TOW operator) shake as hell Link to comment Share on other sites More sharing options...
ED Team BIGNEWY Posted May 1, 2016 ED Team Share Posted May 1, 2016 Hi all ! I don't know if it does the same to you, but for me the cockpit views (pilot and TOW operator) shake as hell not seeing that myself. check your controls options for conflicts in the view category Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, HP Reverb G2 Link to comment Share on other sites More sharing options...
PitbullVicious Posted May 1, 2016 Share Posted May 1, 2016 A minor bug. NADIR / UHF Radio keybinding: Number key bindings With the NADIR and UHF are mixed up, so that "SA324 5" cannot be bound to NADIR and "SA324 4" seems to bind actually to the number 5 on the NADIR keys. i9-9900K @ 5.1GHz | MSI Ventus 3X OC RTX3090 24GB | 64GB 3200MHz DDR4 | Asus ROG Strix Z390-E | Asus Xonar DGX 5.1 Sound Card | Virpil T50CM2 base w/ F/A-18C / A-10C / Virpil T50CM2 Grip | WinWing Super Taurus Throttle | MFG pedals | TekCreations Hornet UFC, Landing Panel, Right Console | WinWing Hornet Combat Ready Panel | Buddy Fox UFC | Foxx Mount | 3 x TM Cougar MFD | HP Reverb G2 | Wacom Intuos S (with VRK) | Honeycomb Alpha Yoke | Thrustmaster Warthog HOTAS | CH Fighter Stick Pro & Throttle | MS Sidewinder 2 FFB | Track IR 5 | Oculus Rift CV1 善く戦う者は、まず勝つべからざるを為して、以て敵の勝つべきを待つ。 Link to comment Share on other sites More sharing options...
Highwayman-Ed Posted May 1, 2016 Share Posted May 1, 2016 (edited) I've only spent a half hour in her so far and started up a couple of times, hover taxied and landed but thus far; A couple of times I've started up and the instrument panel is shaking slightly as soon as I turn the battery on Engine starter doesn't always start after waiting for run up, sometimes requires 2 clicks Cyclic inputs have no effect on the ground resulting in uncontrollable movement when light on the skids Doesn't seem to generate any or much in ground effect? Controls are way too sensitive Gentle run on landings on anything other than a runway at low speed such as 20kmph, 50 ft/min descent = death Edited May 1, 2016 by Highwayman-Ed Intel i9-9900KF @5.2GHz MSI Z390 Gaming Pro Carbon 32GB G.Skill Trident Z DDR3200 RAM MSI RTX 2080 Ti Gaming X Trio 40" Panasonic TH-40DX600U @ 4K Pimax Vision 8K Plus / Oculus Rift CV1 / HTC Vive Gametrix JetSeat with SimShaker Windows 10 64 Bit Home Edition [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
dotChuckles Posted May 1, 2016 Share Posted May 1, 2016 not seeing that myself. Really? Checked for conflicts and have tried it with both TIR and without. The effect is linked to rotor RPM, not present when aircraft is on the ground and cold, then builds as rotor rpm increases, it also increases with flight through transition. It's designed i'm guessing, to give haptic feedback for sensations that you can't experience as your bum is not in the seat. But it also seems to effect the actual cockpit view camera slightly as well as shake the panel. It's a cool effect, but overdone slightly. I didn't experience this sharp vibration in the Gazelle on the few flights that I had in it. It's been noted in the enhancements thread, so not really a big, just more a slight overcooking of an effect. Perhaps give users an option to control it, as combined with the stroboscopic rotor shadow it gives me a raging headache after about 10 minutes and I have to stop flying. Either that or disconnect the vibration from the camera and vibrate the panel instead. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
flying rabbit Posted May 1, 2016 Share Posted May 1, 2016 a Uh-1 with a autohover can be more effectiive then this :( where to start the auto hover only engages sometimes when you press auto collective in a hover it 1 ither kills you or doesnt work at all its max speed with 4 hots is around 150 kmph again a uh-1 is like twice as fast then it with a full loadout great release................................ not This is mostly possible because the uh1h does not have any load depended engine limits modelled. Try to keep the EGT at ~610°C and fly fully loaded, you will see no 220km/h at all. Bug: The battery does not drain at all. (see here ) Link to comment Share on other sites More sharing options...
Recommended Posts