pepin1234 Posted June 22, 2017 Share Posted June 22, 2017 This aircraft is the most awaited in my wish list after the Mig-23. I hope you guys keep this work up. Thanks [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
LevelPulse Posted June 22, 2017 Share Posted June 22, 2017 Looking forward to seeing the video update, any documentation you could link me in regards to the EFM. Trying to build our own and require a very different sort of engine as well ;) [sIGPIC][/sIGPIC] Director | Team Coordinator ME-163B Project The DCS Modding Hub Discord PC Specs: Intel I7 8700k 4.7Ghz Gigabyte Aorus Ultra Gaming Z370 Motherboard 16GB Corsair Vengeance DDR4 3000MHz Ram 500GB Samsung Evo 850 SSD Link to comment Share on other sites More sharing options...
brianacooper11 Posted June 22, 2017 Author Share Posted June 22, 2017 I found out about this project only a couple of weeks ago, and I made a forum account to say this (I know I'm very late): This project is probably one of the most interesting ones I have seen in development and has really grabbed my attention. Not just the aircraft itself but also the effort and ambition of Black Cat simulations. So thank you to all the team members for your hard work thus far and what I hope will be into the future too. I'm really excited to see the future updates for this and I wish you the best of luck in your journey to build the Backfire! We're counting on you :smilewink: That's a fine compliment! Thank you! Link to comment Share on other sites More sharing options...
Fri13 Posted June 22, 2017 Share Posted June 22, 2017 The wouldn't be able to prosecute the sim makers anyway. They wouldn't even care. In different countries etc has own laws, but international laws about design, copyright etc requires that you will do all in your power to defend your trademark, copyright etc. Otherwise you will lose them. This is a problem example with the Linux, as it is a trademark owned by Linus Torvalds (the OS project original creator) and there are lots of abuses etc, and he feels personally bad that he needs to approve nasty legal actions against hobbyists and fans because if he wouldn't, he would lose the trademark. This is the problem that even when you are copyright/trademark owner, you can't just turn a blind eye on something illegal. As if you do so, then when someone bigger does the same thing, they can defend in court that you allowed it to happen and they will win. So as a owner for designs, trademarks, copyrights etc, you need to contact the abuser (even if it is just a fansite etc) once it comes to your attention. And you can make a deal with them for a some reasonable way. So you can show in the court that you have defended and maintained your rights. i7-8700k, 32GB 2666Mhz DDR4, 2x 2080S SLI 8GB, Oculus Rift S. i7-8700k, 16GB 2666Mhz DDR4, 1080Ti 11GB, 27" 4K, 65" HDR 4K. Link to comment Share on other sites More sharing options...
TaktLwG 73 Steinhoff Posted July 15, 2017 Share Posted July 15, 2017 Is there any little sneak peak you can show us? Just something, doesn't have to be much;) Link to comment Share on other sites More sharing options...
muamshai Posted July 24, 2017 Share Posted July 24, 2017 lunch money reserved to buy this module This space is available for your advertisement Link to comment Share on other sites More sharing options...
pappavis Posted August 8, 2017 Share Posted August 8, 2017 hey guys, whats up.. any progress on this module? I know u cant update every week.. though sum screenshots or announcements would be appreciated. met vriendelijke groet, Михель "умный, спортсмен, комсомолетс" [sIGPIC][/sIGPIC] [TABLE]SPECS: i9-9900K 32gigs RAM, Geforce 2070RTX, Creative XFi Fata1ity, TIR5, Valve Index & HP Reverb, HOTAS Warthog, Logitech G933 Headset, 10Tb storage.[/TABLE] Link to comment Share on other sites More sharing options...
3DArtistExtreme Posted August 14, 2017 Share Posted August 14, 2017 hey guys, whats up.. any progress on this module? I know u cant update every week.. though sum screenshots or announcements would be appreciated. Yo Guys :) I`m back. I`ve been away to Russia, to visit my old grandparents. Here are some updates: Few days ago I`ve got my hands on this awesome kit (unfortunately I won`t be able to assemble it in a way it should be) :) Here is some progress on 3D model: Greetings, Oleg 1 -=3DArtistExtreme=- Modeling/UV mapping/Lighting/Shading/Texturing 3D Portfolio http://www.oleg-kovalev.com FlyingIron Simulations Link to comment Share on other sites More sharing options...
SkateZilla Posted August 14, 2017 Share Posted August 14, 2017 are you laser Scanning Model Parts? Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs Link to comment Share on other sites More sharing options...
rrohde Posted August 14, 2017 Share Posted August 14, 2017 are you laser Scanning Model Parts? Guess that's one way to do it... :) PC: AMD Ryzen 9 5950X | MSI Suprim GeForce 3090 TI | ASUS Prime X570-P | 128GB DDR4 3600 RAM | 2TB Samsung 870 EVO SSD | Win10 Pro 64bit Gear: HP Reverb G2 | JetPad FSE | VKB Gunfighter Pro Mk.III w/ MCG Ultimate VKBcontrollers.com Link to comment Share on other sites More sharing options...
3DArtistExtreme Posted August 14, 2017 Share Posted August 14, 2017 (edited) are you laser Scanning Model Parts? Nope, just touching and measuring them, then compare them to blueprints and photographs and model. But the sense of touch is really important to me, especially when you can rotate small part look at it from all directions. Edited August 14, 2017 by 3DArtistExtreme -=3DArtistExtreme=- Modeling/UV mapping/Lighting/Shading/Texturing 3D Portfolio http://www.oleg-kovalev.com FlyingIron Simulations Link to comment Share on other sites More sharing options...
carss Posted August 14, 2017 Share Posted August 14, 2017 Just a question, would this just be a free addon module or will this be a proper paid for full fidelity module? [sIGPIC][/sIGPIC] Planes: FC3, P-51, F-86, F-5E, Mirage 2000, F/A-18, F-14, F-16, Mig-19P :joystick: ED pls gib A-4 and F-4 :cry: Link to comment Share on other sites More sharing options...
WinterH Posted August 14, 2017 Share Posted August 14, 2017 Intention is to show it to the ED, obtain a license, and release it as a paid full-on module as far as I know (and hope in anticipation :)). Sent from my ASUS_Z00ED using Tapatalk Wishlist: F-4E Block 53 +, MiG-27K, Su-17M3 or M4, AH-1F or W circa 80s or early 90s, J35 Draken, Kfir C7, Mirage III/V DCS-Dismounts Script Link to comment Share on other sites More sharing options...
Robert31178 Posted August 15, 2017 Share Posted August 15, 2017 Question: will you be doing the same with the Buc? Also, is the Big shelved until the TU-22 is released? ~Rob Link to comment Share on other sites More sharing options...
RAZBAM_ELMO Posted August 16, 2017 Share Posted August 16, 2017 Just letting you know that I can build that model for you on commission if you'd like. Visit Instagram or Facebook ZMSC Modell Works Sent from my SM-G930W8 using Tapatalk Know and use all the capabilities in your airplane. If you don't, sooner or later, some guy who does use them all will kick your ass. — Dave 'Preacher' Pace, USN. Link to comment Share on other sites More sharing options...
ghostdog688 Posted August 16, 2017 Share Posted August 16, 2017 Just letting you know that I can build that model for you on commission if you'd like. Visit Instagram or Facebook ZMSC Modell Works Sent from my SM-G930W8 using Tapatalk If you get around to doing this model, i would love to see it completed :) Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
3DArtistExtreme Posted August 19, 2017 Share Posted August 19, 2017 (edited) UPDATE! Yo guys :) Here is an update. Past days I`ve been in a battle with a tail, to get it matched with all the reference material. Anyway, I`m still tweaking and getting closer & closer towards the cannon... Here are results: Cya, Oleg Edited August 19, 2017 by 3DArtistExtreme 1 -=3DArtistExtreme=- Modeling/UV mapping/Lighting/Shading/Texturing 3D Portfolio http://www.oleg-kovalev.com FlyingIron Simulations Link to comment Share on other sites More sharing options...
rogonaut Posted August 19, 2017 Share Posted August 19, 2017 thanks for the update! lookin nice:) one of the most exiting/different modules for me. Link to comment Share on other sites More sharing options...
kolga Posted August 19, 2017 Share Posted August 19, 2017 Thanks for the update, and looking great! "Long life It is a waste not to notice that it is not noticed that it is milk in the title." Amazon.co.jp review for milk translated from Japanese "Amidst the blue skies, A link from past to future. The sheltering wings of the protector..." - ACE COMBAT 4 "Blessed be the LORD my strength, which teacheth my hands to war, and my fingers to fight"-Psalm 144:1 KJV i5-4430 at 3.00GHz, 8GB RAM, GTX 1060 FE, Windows 7 x64 Link to comment Share on other sites More sharing options...
3DArtistExtreme Posted August 20, 2017 Share Posted August 20, 2017 (edited) UPDATE Update on today`s work. I`ve been busy tweaking surfaces of the base "Tail" mesh, took me a while to get to get them perfectly, so that light plays on them as on the reference material. Finally I`m at the point that allows me to add smaller object, details and cuts to the main mesh :) Greetings, Oleg Edited August 20, 2017 by 3DArtistExtreme -=3DArtistExtreme=- Modeling/UV mapping/Lighting/Shading/Texturing 3D Portfolio http://www.oleg-kovalev.com FlyingIron Simulations Link to comment Share on other sites More sharing options...
ghostdog688 Posted August 20, 2017 Share Posted August 20, 2017 Great work, keep it up! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
xKBLx_Viper_6354 Posted September 7, 2017 Share Posted September 7, 2017 Its always a joy to see any progress on this project. I hope ED approves of your license and gives you the green light. This would be a good step towards future DCS multi crew modules. [sIGPIC][/sIGPIC] If it doesn't work how it should, give it a good HARD smack. 100% fixed every time. Link to comment Share on other sites More sharing options...
carss Posted September 7, 2017 Share Posted September 7, 2017 Is the entire model being made again from scratch? [sIGPIC][/sIGPIC] Planes: FC3, P-51, F-86, F-5E, Mirage 2000, F/A-18, F-14, F-16, Mig-19P :joystick: ED pls gib A-4 and F-4 :cry: Link to comment Share on other sites More sharing options...
Nooch Posted September 7, 2017 Share Posted September 7, 2017 (edited) I spotted a difference here that I circled in red. Also in a more subtle manner, at the tip of the tail, there are tiny horizontal fins in place of the bulge we can see on the 3D model. Maybe just due to the fact the model isn't finished and you'll want to say thanks captain obvious but I still wanted to point these out just in case. Edited September 7, 2017 by Nooch [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Askerov24 Posted September 7, 2017 Share Posted September 7, 2017 Is the entire model being made again from scratch? Yes Acer Aspire E5-571G-713W/Intel® Core™ i7-4510U 2.0-3.1GHz/12 GB DDR3 L Memo/NVIDIA® GeForce® 820M 2 GB/1000 GB HDD Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now