_Hoss

You have to push a button for Voice Attack? make sure the button for PTT is not the same as any of the F1-F12 buttons for the menu screen, or some overlay button. My voice attack does not show up while I'm using it, because I use an open mic for it. My PTT is for SRS, TS, or in game comms. And by the red X'd out circle on your "Listen" control panel it looks like you have it turned off. Try not using a joystick command to have VA listen, go back to open mic and see how it works. Good Luck

The USN will use Growlers/Prowlers for area (A/O) jamming on a broad scale of known systems (Intellegence) they want to jam or deny use to the enemy. DECM on tactical aircraft is only used to get the pilot into the target area and out of it again, DECM uses pulse for pulse deception of target tracking RADAR or the active seeker in the missiles nose. AN/ALE-41 type Chaff system is used to build corridors/walls like window chaff used in WWII. The Growlers don't care how far or close they are to the A/O because they are ACTIVE all the time. Tactical DECM when set to Repeat/Transmit will only start transmitting when they have a signal strength strong enough to enable circuits in the transmitter. So just because it's on does not mean it is actually transmitting. Once the A/C has deployed it's ordnance the DECM is designed to stay on a bit longer to allow time for it to get away. So the Ukrainian Air Force is being highly adaptive in its use because they understand how it's used. But they have to get close enough to make the systems turn on, unless they hardwired/modified it to do otherwise. And another thing you have to remember, the Ukrainian and Russian systems are not dissimilar. But Mig-29s fighting other Mig-29s with the same RADAR/DECM system should not see each other as a threat unless one side or the other has modified the RADARS carrier freq, PRF and PRT of it's transmitted RADAR pulse, then one looks pretty much like the other. I'm sure they are doing things you and I are not privy too, to overcome some of these situations. Case in point, during the Iran, Iraq war the Iranian AF had F-4's and F-14's, the US Navy came up with the AN/DLQ-3B (Pod) to handle this situation, because the AN/ALQ-100 in the F-14 and the AN/ALQ-126A in the A-7, and A-6s, the EA-6B even had it, would never respond to a lock from an F-4 or F-14, (pilot has to a call buddy spike) the threat library in the ALR-45/50 and ALQ-126A were programed to see it as friendly. I'm sure the Dev's have a broad understanding of how ECM and DECM, ECCM are supposed to work in theory, but in actuality, they have to assume for our entertainment experience. They can do anything they wish, with the code to make everyone happy, but is it authentic?................... Who cares it's a GAME!........................... Sorry, a SIM......... Cheers and happy flying! Hoss “Knowledge is the treasure, and practice is the key to it” Lao Tzu https://www.radartutorial.eu/16.eccm/ja01.en.html

I guess results vary, been buying from newegg since the mid 90s and nary a hitch. Just got my 1TB M.2 SSD yesterday, installed and working great. I have found you need to read everything about the terms, who's selling it, where it's coming from, and return/warrantees before you buy, from every retailer. Fools and their money are quickly separated....... avoid being the fool, your money doesn't go as far today as it did just yesterday. Cheers

Getting new maps; it would be great to have them done like the Marianas map, with current, WWII, and mid century Korean/Vietnam Era conflicts if they fit the geography. We have nothing for the Korean war jets, but having the neo modern version gives you that time span between the 50s to now for numerous scenarios. Especially carrier ops, and the opportunity to make some scratch on all the now new aircraf, ships, theater packages. If they made them in that format from the beginning if applicable, would greatly benefit everyone instead of being a niche map market. JMTCW....... Cheers

Are you using TARGET?, or some other software to program your HOTAS? or nothing at all, just dx presses?. What Aircraft are you having troubles with, is there an error file of your problem? Are you using the open beta or release version?. Does the button work for another aircraft?, have you tried slaving the button/Switch to a unrelated command to see if it works there?.... Reason I ask, is if you are using the open beta you could be experiencing a bug. I thought my BlackHog was bad after an update, where it no longer worked as it should have when I programed it at an earlier time and it worked. I verified that with the Jug and Mossie for keyboard and analog trim bugs, they all worked in the Mustang using the BlackHog. Do some more troubleshooting and eliminate instances where it works and does not. I'm sure there will be more advice to follow from others. But, I do know the LASTE three way switch will not operate correctly unless you have the EAC and RDR ALTIM switches in the correct position. Remember the TMWH is made to compliment the A-10 and the way it works. Imagination and experimentation are the words of the day when you try to get it to work the same way on other platforms. Let us know how you are coming along.. Cheers Hoss

Check PM's

Yeah, I have the same problem. The Jug seems to be plagued with problems getting things to work, there are no keystrokes for any of the bomb arming commands, unlike he Mustang. Trying to assign keystrokes to the jug control GUI for Keyboard, when bugged do not work on my BlackHog, had the same problem with the Mossie. I knew the BH was not the problem because the same switches on it work in the Mustang for bomb arming because it has keyboard "values" for the action. I also had the same problem with the Mossie. They both work now, but I grind my teeth every time a new beta comes out. But I have had the oil gauge not work even before I discovered how to turn on the lights. I guess an update is coming out Thursday?.................. FINGERS CROSSED.............

My LG 32" monitor is G-Sync compatible and I'm running a 3080ti, I use G-sync and nothing else. When I had an inferior VGA I used the in game v-sync and and told nvidia to not to use v-sync or triple buffering. Both work great to stop screen tearing. I get 50 to 70 fps in the Wolfpack campaign, using the full settings recommended by Reflected, if your computer can handle it. My monitor is 164fps max with the correct video card and cable.

Are "Sequence", "Chain" and "Tempo" programing possible with this utility?

Going thru the tutorials I find what I need to map and and decide where I want it to be located. Decide on Sequence, Chain, and tempo commands and then go from there. Check the downloads section on the website "Profiles" and see if someone has posted one for the module you want. I don't use them I just look to see how they are using all the buttons, and if it's ergonomic or not. Are you using TARGET GUI or SCRIPT?......

Complete DX 120 key presses will give you TEMPO presses via script. You don't have to mess with writing anything just start the script, and assign buttons. TARGET GUI is ridiculously easy to do, much easier than the other HOTAS programs.

You should use TARGET to set up your devices and insure they are working correctly and software/firmware are up to date. You don't have to use the GUI or Script, but you are really narrowing your full potential for the TMWH. I use Sedenions Complete 120 DX program for DCS, works great, just like not using TARGET but instead of 32/64 buttons I get 120 with TEMPO commands (long/short presses) I also use a modifier (S3/Lever) on my stick to double commands on my BlackHog Explorer's dx presses. Razbam has a profile here....................... https://www.digitalcombatsimulator.com/en/files/filter/type-is-profile/unit-is-av-8b/sort-is-date_desc/apply/?PAGEN_1=2 Grim Reapers.... they have an arse load of tutorials on pretty much all of the current DCS aircraft, and plenty on the Harrier.

Post Liberty Short Arm innspection.........

Try AG-51..... VUSN group, F-14 (VF-51), F-18, AV8B, A-4, and F-4 when it comes out. They also fly F-16, and helps. They build their own missions and fly on their private server on mission nights. If interested, PM me and I'll send you their web site. They have been around for over 20 years in IL2 and DCS, so they will be around for awhile longer. Hoss

P-38

PM the Wolfpack, the have guys that do Warbirds on their server. You need to get on their Discord channel and tell them what you would like to do.

Until ED/DCS borks it in the next update, this latest one fixed the Mossie after they broke it in the previous update. Hopefully they get the Jug fixed too.

I use the keyboard (not numpad) numbers 3 - 9, and RCTL + 1 - 9, PM me and I'll show you my TMWH and BlackHog device profiles. I did the same thing with the Jug, buts really buggy right now, so what I had working flawlessly, is booked now. I hate how the closed beta testing wrecks other modules, and it goes un noticed. Complaing is useless since this is an open beta. But it manages to make its way into the stable versions too. I also have a data base for what commands are not used in the P-51, P-47 and Mosquito, that can be used for unassigned "control" gui spaces.

Haze Grey and Underway man..........

Sgt Coyle.............If You Ain't Ordnance You're Ain't Shiznit!.............. BB Stacker?

There is a collar that fits around that shift that keeps that part from breaking, or when it's loose it won't move. The part is 3D printed in two pieces, small magnets are glued into each end to hold it in place.

Please post info for the other TMWH users. Thanks Hoss

HOTAS? software? I use a TMWH, and use Sedenions Complete 128 DX script which is coded correctly for A-10 A/P all modes. If you are using some other HOTAS I'm afraid this won't help you.

PM Sedenion, he should be able to help you out

I meant to say Fanatec sim racing equipment..... had Brunner on my mind..... can't remember why....... Old Timers kicking in I reckon