Rykane Posted September 17, 2014 Share Posted September 17, 2014 I tried restarting my PC but it hasn't seemed to fix anything for me so far. Link to comment Share on other sites More sharing options...
Rogue Trooper Posted September 17, 2014 Share Posted September 17, 2014 always run a repair after update guys. Mine runs the same as the other modules, 45fps taxi facing busy part of airport, 50 - 60 fps every where else on the runway and low flight, high in the air 70s. Training flights only at the mo. HP G2 Reverb, Windows 10 VR settings: IPD is 64.5mm, High image quality, G2 reset to 60Hz refresh rate. OpenXR, Open XR tool kit disabled. DCS: Pixel Density 1.0, Forced IPD at 55 (perceived world size), 0 X MSAA, 0 X SSAA. My real IPD is 64.5mm. Prescription VROptition lenses installed. VR Driver system: I9-9900KS 5Ghz CPU. XI Hero motherboard and RTX 3090 graphics card, 64 gigs Ram, No OC. Vaicom user. Virpil Mongoose base CM3 & Mongoose stick CM2 (not set for dead stick), Virpil TCS with apache Grip. MFG pedals with damper upgrade. Total controls Apache MPDs set to virtual Reality height. Simshaker Jet Pro vibration seat.. Uses data from DCS not sound. Link to comment Share on other sites More sharing options...
Brainless Posted September 17, 2014 Share Posted September 17, 2014 Little bit low FPS here. Free flight ~40fps (with other aircrafts hit 60fps). On the ground (first training mission) ~20fps. But I found that when I'm on the ground and if I don't see the horizon (just look at the instruments), fps jumps to 40. Maybe this will help. Ryzen 5900X (Water), 64GB DDR4@3600CL16, RTX 3090 (Water), U4021QW, Samsung 980 Pro 2TB, 2x1000GB RAID 1, 2000GB, Thrustmaster Warthog + MFG Crosswind, Reverb G2 V2 Link to comment Share on other sites More sharing options...
Rogue Trooper Posted September 17, 2014 Share Posted September 17, 2014 You running Vsync? HP G2 Reverb, Windows 10 VR settings: IPD is 64.5mm, High image quality, G2 reset to 60Hz refresh rate. OpenXR, Open XR tool kit disabled. DCS: Pixel Density 1.0, Forced IPD at 55 (perceived world size), 0 X MSAA, 0 X SSAA. My real IPD is 64.5mm. Prescription VROptition lenses installed. VR Driver system: I9-9900KS 5Ghz CPU. XI Hero motherboard and RTX 3090 graphics card, 64 gigs Ram, No OC. Vaicom user. Virpil Mongoose base CM3 & Mongoose stick CM2 (not set for dead stick), Virpil TCS with apache Grip. MFG pedals with damper upgrade. Total controls Apache MPDs set to virtual Reality height. Simshaker Jet Pro vibration seat.. Uses data from DCS not sound. Link to comment Share on other sites More sharing options...
Brainless Posted September 17, 2014 Share Posted September 17, 2014 You running Vsync? Yes. Ryzen 5900X (Water), 64GB DDR4@3600CL16, RTX 3090 (Water), U4021QW, Samsung 980 Pro 2TB, 2x1000GB RAID 1, 2000GB, Thrustmaster Warthog + MFG Crosswind, Reverb G2 V2 Link to comment Share on other sites More sharing options...
Art-J Posted September 17, 2014 Share Posted September 17, 2014 Tesarus, could you post a screenshot of your windows GFX card settings? If you're getting acceptable frames on i5 and GTX770, maybe some peculiar NVidia driver option is causing these big drops for other fellaz? i7 9700K @ stock speed, single GTX1070, 32 gigs of RAM, TH Warthog, MFG Crosswind, Win10. Link to comment Share on other sites More sharing options...
Mirtma Posted September 17, 2014 Share Posted September 17, 2014 FPS are really lower. 30-35 FPS in free flight. Gigabyte Z490 Gaming X | i5 10600K@4700 | 32 Gb DDR4 @ 3200Mhz | Gigabyte Aorus GeForce GTX 1080 Ti 11G | MONITOR IIYAMA 24,5" LED LCD @ 1920 x 1080 | Windows 11 | Saitek X-55 Rhino | TrackIR 5 Pro Link to comment Share on other sites More sharing options...
Eldur Posted September 17, 2014 Share Posted September 17, 2014 I think the Low FPS and the FFB Issues are linked. This is a problem that comes up every so often for some years now in basically every sim (RoF and BoS as well as Cliffs come to my mind). I'd really love to have a company like Microsoft picking up work on a FFB3, this would eliminate such problems most probably. I'd even pledge to a Kickstarter campaign for some decent FFB hardware, including rudders for the trim works and control surface pressure. Overall the whole FFB thing is very old by now, over 10 years untouched. This can't come without any problems. This has to change. Link to comment Share on other sites More sharing options...
Abburo Posted September 17, 2014 Share Posted September 17, 2014 AMD guys, maybe it will worth wait 2 or 3 month for EDGE. My 770GTXs are playing it nicely in full options and heavily moded. I am really sorry I cannot test it on my second desktop which is in I5 with AMD 7990. Romanian Community for DCS World HW Specs: AMD 7900X, 64GB RAM, RTX 4090, HOTAS Virpil, MFG, CLS-E, custom Link to comment Share on other sites More sharing options...
Zakatak Posted September 17, 2014 Share Posted September 17, 2014 I'm surprised that between all the first impressions I watched, from YoYo, Bluedrake, Jive, Ralfidude, DDG, Bunyap, PC Pilot, SimHQ, not a single one of them mentioned this problem which is pretty significant. Has this only become an issue recently? Link to comment Share on other sites More sharing options...
amalahama Posted September 17, 2014 Share Posted September 17, 2014 Totally unplayable, fps drops to 5 fps or less, normally it maintains +30 on any other airplane. I use a FFB joystick (G940) Regards! Link to comment Share on other sites More sharing options...
uboats Posted September 17, 2014 Share Posted September 17, 2014 Totally unplayable, fps drops to 5 fps or less, normally it maintains +30 on any other airplane. I use a FFB joystick (G940) Regards! SP or MP? [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn | Link to comment Share on other sites More sharing options...
hocician Posted September 17, 2014 Share Posted September 17, 2014 same here... nearly not playable at the moment... i am usualy near the 60fps ... but here it is sometimes with hick ups... ... but it looks sooo great... i think we/you will find the solution... ;-) Link to comment Share on other sites More sharing options...
amalahama Posted September 17, 2014 Share Posted September 17, 2014 (edited) SP or MP? SP, I haven't tried MP yet If I look down inside the cockpit, fps came back to normal. It seems something in the windshield is the culprit of the massive fps drop. Regards Edited September 17, 2014 by amalahama Link to comment Share on other sites More sharing options...
theGozr Posted September 17, 2014 Share Posted September 17, 2014 (edited) Well wao!! hummmmmm doubt FFB ? joystic doing a buzz sound when activated.. and stay activated after DCS off. ( can cause damage ? ) ? .. Hope a serious boost with EDGE.. unflyable atm.. ( shouldn't be due to 3D polygons count, modern days GPU should eat this right up maybe a dx9 problem ? but maybe by gauges quantity to compute ? ) -Polygons/computing optimization solution? Horrible FPS ( Only for the MiG21 cockpit view and external directed toward 3D model ) Why double set keys ? FFB ON/OFF in DCS interface and in MiG21 controls ? I barely touch it .. I'm sure there are more but i prefer waiting for a LN's solution on the FFB enigmatic problem to ovoid more trouble. http://forums.eagle.ru/showthread.php?t=130353 BTW getting + 80 fps regularly and below 20 fps in MiG-21 ... Edited September 17, 2014 by theGozr Fly it like you stole it.. Link to comment Share on other sites More sharing options...
theGozr Posted September 17, 2014 Share Posted September 17, 2014 Now thinking of this why no FFB problem reported in Alpha/beta before? as flying in RL I can tell with out any doubt and reservation FFB is the only good way . you can get any ultra expensive sticks but it wont cut out. invest in FFB. ;) So a fix should come quickly thanks to LN... hopefully Fly it like you stole it.. Link to comment Share on other sites More sharing options...
uboats Posted September 17, 2014 Share Posted September 17, 2014 SP, I haven't tried MP yet If I look down inside the cockpit, fps came back to normal. It seems something in the windshield is the culprit of the massive fps drop. Regards SP here: inside pit lower fps than look outside through windfield. ;) [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn | Link to comment Share on other sites More sharing options...
Corrigan Posted September 17, 2014 Share Posted September 17, 2014 SP here: inside pit lower fps than look outside through windfield. ;) Same here, but for both MP and SP. Win10 x64 | SSDs | i5 2500K @ 4.4 GHz | 16 GB RAM | GTX 970 | TM Warthog HOTAS | Saitek pedals | TIR5 Link to comment Share on other sites More sharing options...
Art-J Posted September 17, 2014 Share Posted September 17, 2014 Gozr - probably because only minority of folks have FFB sticks? Notice that most (if not all) youtube previewers used Warthogs or similar gear. Keeping modern software compatible with the old Microsoft FFB (no matter how good it is) is going to be a problem. i7 9700K @ stock speed, single GTX1070, 32 gigs of RAM, TH Warthog, MFG Crosswind, Win10. Link to comment Share on other sites More sharing options...
uboats Posted September 17, 2014 Share Posted September 17, 2014 Same here, but for both MP and SP. I have higher drop in MP than in SP, don't know why. No others around my AC. [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn | Link to comment Share on other sites More sharing options...
SkateZilla Posted September 17, 2014 Share Posted September 17, 2014 Well wao!! hummmmmm doubt FFB ? joystic doing a buzz sound when activated.. and stay activated after DCS off. ( can cause damage ? ) ? .. Hope a serious boost with EDGE.. unflyable atm.. ( shouldn't be due to 3D polygons count, modern days GPU should eat this right up maybe a dx9 problem ? but maybe by gauges quantity to compute ? ) -Polygons/computing optimization solution? Horrible FPS ( Only for the MiG21 cockpit view and external directed toward 3D model ) Why double set keys ? FFB ON/OFF in DCS interface and in MiG21 controls ? I barely touch it .. I'm sure there are more but i prefer waiting for a LN's solution on the FFB enigmatic problem to ovoid more trouble. http://forums.eagle.ru/showthread.php?t=130353 BTW getting + 80 fps regularly and below 20 fps in MiG-21 ... DX9c Has no Upper Polygon Limit, Only a limit on Object Calls before CPU Overhead and Normal Vertex Map Limits. None of which is exceeded by the MIG-21. Like I said, The MIG-21 Pit and External Mesh is a lot more detailed than most of the DCS Models, So a Small FPS Decrease when Compared to say, A-10C, is Normal. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs Link to comment Share on other sites More sharing options...
Corrigan Posted September 17, 2014 Share Posted September 17, 2014 I have higher drop in MP than in SP, don't know why. No others around my AC. It's hard to draw conclusions from that since you don't know what scripts the server is running, what people are doing etc. If it's a rendering problem which I imagine it is, there shouldn't be any important differences between MP and SP. Win10 x64 | SSDs | i5 2500K @ 4.4 GHz | 16 GB RAM | GTX 970 | TM Warthog HOTAS | Saitek pedals | TIR5 Link to comment Share on other sites More sharing options...
uboats Posted September 17, 2014 Share Posted September 17, 2014 It's hard to draw conclusions from that since you don't know what scripts the server is running, what people are doing etc. If it's a rendering problem which I imagine it is, there shouldn't be any important differences between MP and SP. our own server, no script, and only two other clients in the sky far away. [sIGPIC][/sIGPIC] My DCS Mods, Skins, Utilities and Scripts | Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD | | TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn | Link to comment Share on other sites More sharing options...
Lilkiki Posted September 17, 2014 Share Posted September 17, 2014 (edited) Same here, getting FPS oscillating between 35 & 50 FPS, whereas I'm usually at 50/60 FPS all the time with other DCS aircrafts (TGP, Schkval -> "Picture in Picture"). with : - i7 3770k OC @ 4.5Ghz - GTX 870Ti 3Go - 16Go RAM I'm very sad :( EDIT : I forgot to say it's still an awesome plane !! The amount of work should have been huge, 3d model, texture, animation, codes are just pieces of art;) Edited September 17, 2014 by Lilkiki [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
eyusuf Posted September 17, 2014 Share Posted September 17, 2014 nag nag. The aircraft has just now been released and as we all know with new software - gremlins abound. Patience. Link to comment Share on other sites More sharing options...
Recommended Posts