Jump to content

Damage Issue - Tail shot off but tail rotor works


FalcoGer

Recommended Posts

As you can see from the screenshot, my tail was shot off but the tail rotor was still there and I had absolutely full control and was able to carry out several further attacks. As the game assumed I was dead, nobody fired back.

Only happened once - every other time, no tail = crash.

20230422185146_1.jpg

Link to comment
Share on other sites

  • 3 weeks later...

ah64bug.trk

 

So I was just testing the new flight model, fully loaded with 8 Limas, rocket pods and 86%fuel on the testing range instant mission.
I jumped to the CGP in a hover and told pilot george  to rotate left. He inmmediately drops the helicopter to the ground bouncing but could still fly and shoot.

After I expended all of my missiles I jumped into the pilot seat and went on with rockets, sadly the gun was dammaged by the controlled bounce into terrain. 

But the I saw the shadow of the apache and I realised I´ve been without a tail rotor the whole time but I could still use the rudder as if nothing happened.

IDK if this could be due that I was in the cpg during the accident or some other issue...

Track file attached

Link to comment
Share on other sites

   Hello, I would like reporting a tail rotor bug when I crashed. I had broken my tail, but the tail rotor was rotating in the air alone, in the same position if had a tail there. The tail totor was linket to the "body" movement: If body turn, tail rotor was turning too (in the air).

 

Greetings.

 

FYqJcJX

Rotor_phantom02.jpg

Rotor_phantom_01.jpg

DCS Wishlist:

 


  • DCS: A-10C 2: new suite, flight and system improvements. fix no real things. To include new features. Some real love.

Link to comment
Share on other sites

nullYep bug still here. Was hit by an ATGM missile but still could fly home with 1 engine out and missing tail.

image.jpeg

i9 9900k, 64 Go RAM, RTX 4090, Warthog HOTAS Throttle & Stick, Virpil AH64 collective, Saitek Combat Rudder, MFD Cougar, Trackir 5 Pro, Multipurpose UFC, Alain Dufour's TEDAC and Oculus Rift S (when I want some VR),

http://www.twitch.tv/zarma4074 /  https://www.youtube.com/user/Zarma4074 

 

Copy-of-DCS-A-10C-User-Bar-CMR-ConvertImage.jpg

Link to comment
Share on other sites

En 13/12/2022 a las 17:16, BIGNEWY dijo:

ok thanks we will watch for it 

BIGNEWY I have had this issue when I was flying a Training mission from DCS World "Training" menu. No MP here.

Greetings. 

DCS Wishlist:

 


  • DCS: A-10C 2: new suite, flight and system improvements. fix no real things. To include new features. Some real love.

Link to comment
Share on other sites

Good day. I was learning about controlling the Apache with George, when I hit the ground a little hard, and when I went to the external view - I saw that although the whole tail have broken off, the tail rotor was still there and working, although suspended in the air. Luckily I was recording at the time, I have uploaded the recording here:

 

Regards,

Marius.

Link to comment
Share on other sites

Happened to me tonight.

Aorus Z370 Ultra Gaming WiFi MB | i7-8700k @ 4.9 GHz | EVGA GTX 1070 Ti | 32 GB CORSAIR Vengeance 3000 MHz DDR4 Ram | Corsair H100 Pro Cooler | RaidMax TX 850M PS | Samsung 970 Evo Plus M.2 NVMe SSD |TM Warthog Hotas w/ F/A-18 Hornet grip | Corsair Gamer 570x Crystal Case | Oculus Rift S

 

DCS | AV8B | F18C | F-16C | A10C | Mig 29 | F15 | SA-342 | Huey | Persian Gulf | NTTR | Combined Arms

Link to comment
Share on other sites

Marianas map instant mission. 

 

yes had this happen tonight. tail rotor still attached and has authority after tail boom is destroyed and gone.

MT, and bound GPU  not working in MT.

 

 

 

rotordmdstefectv1.png


Edited by 71st_Mastiff

" any failure you meet, is never a defeat; merely a set up for a greater come back, "  W Forbes

"Success is not final, failure is not fatal, it is the courage to continue that counts,"  Winston Churchill 
" He who never changes his mind, never changes anything," 

MSI z690 MPG DDR4 || i9-14900k|| ddr4-128gb PC3200 || MSI RTX 4080S|Game max 1300w|Win11| |turtle beach elite pro 5.1|| ViRpiL,T50cm2||MFG Crosswinds|| VT50CM-plus rotor Throttle || G10 RGB EVGA Keyboard/MouseLogitech || PiMax Crystal VR || 32 Asus||

Link to comment
Share on other sites

This has happened to me a few times also, yesterday,  I went back to base to rearm/refuel I did a repair. Ground crew was nice enough to roll out a new tail section for me, but didnt attach it? They musta ran out of tape?

null

image.png

  • Like 1

Windows 10 Pro - 64 Bit / ASUS ROG Strix B650E-F Gaming / AMD 7800X3D / G.Skill Trident Z5 NEO 64GB DDR5 6000 Ram / SSD M.2 SK hynix Platinum P41 2TB / MSI Gaming GeForce RTX 4090 SUPRIM Liquid X 24G / SteelSeries Arctis 7 Headset /LG-Ultragear 38" IPS LED Ultrawide HD Monitor (3840 x 1600) / Track IR4 / Thrustmaster TPR Pendular Rudder Pedals / Virpil HOTAS VPC Constellation ALPHA-R & VPC MongoosT-50CM3 Throttle

 

Link to comment
Share on other sites

  • 2 weeks later...

Had this several times now, flying with no tail, but still maintained full control.

I did a repair tonight, shut down, all seemed to go well. I did a re-arm, weapons appeared on pylons, but did not register on Weapons page. Tried changing the load out, tried ejecting the load and re-arming, same thing every time, they appeared on the pylons, but would not register. Because they didn't register, I couldn't select them, so couldn't use any of my pylon weapons.

Link to comment
Share on other sites

Happens to me quite often when getting hit from the side by BMP or Shilka shots. 

Kind of funny that it's now been over 2 months and there is still no fix that got "soon" delivered. Surely ED thinks we need an accurate mathematical solution implemented for this simple problem. Sure, sure. 

Seems like we dedicated Apache pilots have to suck it up, no priority for ED.

So same as always. Back to regular flying and enjoying the view.

See ya. 

  • Like 1

Ryzen 7 5800X3D // 64 GB RAM // RTX 4090 // Quest Pro // Quest 3

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...